✦ScienexySCIENCE KNOWLEDGE LIBRARY
General science · SCI-FORM-ENG-1548

Steady-State Error for Step Input

For a stable unity-feedback system with a unit-step reference input, the steady-state error is the reciprocal of one plus the position error constant K_p, provided the final-value theorem conditions are satisfied.

\(e_{\mathrm{ss}} = 1/(1 + K_{\mathrm{p}})\)

What this formula means

For a stable unity-feedback system with a unit-step reference input, the steady-state error is the reciprocal of one plus the position error constant K_p, provided the final-value theorem conditions are satisfied.

Scientific principle

Principle

A step input represents a constant reference command. In a unity-feedback system, the error is determined by the difference between the reference and output. The position error constant measures the low-frequency loop gain relevant to step tracking.

Derivation

  • 1. For unity feedback, the error transform is E(s) = R(s)/[1 + G(s)].

  • 2. A unit-step input has R(s) = 1/s.

  • 3. Therefore, E(s) = 1/[s(1 + G(s))].

  • 4. Using the final-value theorem, e_ss = limₜ→∞ e(t) = limₛ→₀ sE(s), provided the closed-loop error response satisfies the theorem's stability conditions.

  • 5. Substitute E(s): e_ss = limₛ→₀ 1/[1 + G(s)].

  • 6. Define the position error constant K_p = limₛ→₀ G(s).

  • 7. Therefore, e_ss = 1/(1 + K_p).

Final Result

e_ss = 1/(1 + K_p)

Position Error Constant

K_p = limₛ→₀ G(s)

System Type Behaviour

  • Type 0: finite nonzero steady-state error for finite positive K_p.

  • Type 1 or higher: zero steady-state error for a step input, under stable unity-feedback conditions.

Variables and their meanings

SymbolMeaningUnit

e_ss

Steady-state tracking error for a unit-step input

Same unit as the reference signal

K_p

Position error constant

Dimensionless for a unity-scaled position loop

G(s)

Open-loop forward-path transfer function for unity feedback

Depends on system scaling

R(s)

Reference-input Laplace transform

Reference unit × s

E(s)

Error-signal Laplace transform

Error unit × s

SI units and conversions

Steady State Error

Same unit as the reference input

Position Error Constant

Dimensionless for unity-scaled systems

Dimensional Formula

Depends on the reference signal

Conditions of use

  • The system must use unity negative feedback.

  • The reference input must be a unit step for the stated expression.

  • The position error constant must exist or have a meaningful limiting value.

  • The closed-loop error response must satisfy the final-value theorem conditions.

  • The system type must be identified when interpreting finite or zero error.

Limitations and assumptions

  • The formula is not directly applicable to non-unity feedback without accounting for the feedback transfer function and signal scaling.

  • An unstable closed-loop system may not have a finite steady-state error.

  • A finite K_p produces a nonzero step error in a conventional Type 0 system.

  • The formula assumes a linear time-invariant model.

  • Actuator saturation, nonlinear friction, dead zones, and other nonlinearities can alter practical tracking error.

Step-by-step worked examples

ProblemSolutionAnswer

A stable unity-feedback system has a position error constant K_p = 9. Calculate its steady-state error for a unit-step input.

  • Given: K_p = 9.

  • Use: e_ss = 1/(1 + K_p).

  • e_ss = 1/(1 + 9).

  • e_ss = 1/10.

  • e_ss = 0.1.

The steady-state error is 0.1, or 10% of the unit-step reference.

A stable unity-feedback Type 0 system has G(s) = 20/(s + 4). Determine its unit-step steady-state error.

  • Position error constant: K_p = limₛ→₀ G(s).

  • K_p = 20/(0 + 4) = 5.

  • Use: e_ss = 1/(1 + K_p).

  • e_ss = 1/(1 + 5).

  • e_ss = 1/6 ≈ 0.1667.

The steady-state error is approximately 0.1667, or 16.67% of the unit-step reference.

Real-world applications

  • Position-control accuracy analysis

  • Motor-speed tracking

  • Servo-system design

  • Industrial setpoint regulation

  • Feedback-controller performance evaluation

Formula Meaning

For a stable unity-feedback system with a unit-step reference input, the steady-state error is the reciprocal of one plus the position error constant K_p, provided the final-value theorem conditions are satisfied.

Sources and further reading

No source has been supplied for this item yet. Treat the claim as needing editorial verification.

← Back to Formula Hub · Suggest a correction or source