✦ScienexySCIENCE KNOWLEDGE LIBRARY
General science · SCI-FORM-ENG-1549

Steady-State Error for Ramp Input

For a stable unity-feedback system subjected to a unit-ramp reference input, the steady-state error is the reciprocal of the velocity error constant K_v, provided the final-value theorem conditions are satisfied.

\(e_{\mathrm{ss}} = 1/K_{\mathrm{v}}\)

What this formula means

For a stable unity-feedback system subjected to a unit-ramp reference input, the steady-state error is the reciprocal of the velocity error constant K_v, provided the final-value theorem conditions are satisfied.

Scientific principle

Principle

A ramp input increases linearly with time. The velocity error constant measures the system's ability to track this continuously increasing reference. A larger velocity error constant generally produces a smaller steady-state ramp-tracking error.

Derivation

  • 1. For a unity-feedback system, E(s) = R(s)/[1 + G(s)].

  • 2. A unit-ramp input r(t) = t has Laplace transform R(s) = 1/s².

  • 3. Therefore, E(s) = 1/[s²(1 + G(s))].

  • 4. Apply the final-value theorem: e_ss = limₛ→₀ sE(s), provided the error response satisfies the theorem's stability conditions.

  • 5. Substitute the error transform: e_ss = limₛ→₀ 1/[s(1 + G(s))].

  • 6. Define the velocity error constant K_v = limₛ→₀ sG(s).

  • 7. For the usual stable tracking case, the resulting steady-state error is e_ss = 1/K_v.

Final Result

e_ss = 1/K_v

Velocity Error Constant

K_v = limₛ→₀ sG(s)

System Type Behaviour

  • Type 0: infinite steady-state error for a unit ramp.

  • Type 1: finite steady-state error equal to 1/K_v.

  • Type 2 or higher: zero steady-state error for a unit ramp, under stable unity-feedback conditions.

Variables and their meanings

SymbolMeaningUnit

e_ss

Steady-state tracking error for a unit-ramp input

Same unit as the reference signal

K_v

Velocity error constant

s⁻¹ for a dimensionless position-loop gain convention

G(s)

Open-loop forward-path transfer function for unity feedback

Depends on system scaling

R(s)

Reference-input Laplace transform

Reference unit × s

E(s)

Error-signal Laplace transform

Error unit × s

t

Time

s

SI units and conversions

Steady State Error

Same unit as the reference signal

Velocity Error Constant

s⁻¹ under the standard unity position-loop convention

Dimensional Formula

Depends on the reference signal and system scaling

Conditions of use

  • The system must use unity negative feedback.

  • The input must be a unit ramp, r(t) = t.

  • The velocity error constant must exist and be positive for a finite positive error.

  • The closed-loop error response must satisfy the final-value theorem conditions.

  • The system type must be determined before interpreting the result.

Limitations and assumptions

  • The equation is for a unit-ramp input; a ramp with slope A has steady-state error A/K_v.

  • A Type 0 system has unbounded ramp-tracking error under the conventional linear model.

  • The formula assumes a stable linear time-invariant system.

  • Non-unity feedback requires a modified error expression.

  • Real systems may have actuator limits and nonlinearities that prevent ideal ramp tracking.

Step-by-step worked examples

ProblemSolutionAnswer

A stable unity-feedback Type 1 system has K_v = 5 s⁻¹. Calculate its steady-state error for a unit-ramp input.

  • Given: K_v = 5 s⁻¹.

  • Use: e_ss = 1/K_v.

  • e_ss = 1/5.

  • e_ss = 0.2.

The steady-state error is 0.2 reference units.

A unity-feedback system has G(s) = 10/[s(s + 2)]. Determine its steady-state error for a unit-ramp input.

  • Calculate the velocity error constant: K_v = limₛ→₀ sG(s).

  • K_v = limₛ→₀ 10/(s + 2).

  • K_v = 10/2 = 5 s⁻¹.

  • Use: e_ss = 1/K_v.

  • e_ss = 1/5 = 0.2.

The steady-state error is 0.2 reference units.

Real-world applications

  • Constant-velocity position tracking

  • Robotic trajectory control

  • Servo and tracking systems

  • Machine-tool motion control

  • Control-system accuracy analysis

Formula Meaning

For a stable unity-feedback system subjected to a unit-ramp reference input, the steady-state error is the reciprocal of the velocity error constant K_v, provided the final-value theorem conditions are satisfied.

Sources and further reading

No source has been supplied for this item yet. Treat the claim as needing editorial verification.

← Back to Formula Hub · Suggest a correction or source