✦ScienexySCIENCE KNOWLEDGE LIBRARY
General science · SCI-FORM-ENG-1792

S-Wave Velocity in an Elastic Medium

S-wave velocity is the propagation speed of shear seismic waves in an elastic solid. It is determined by the shear modulus divided by the material density.

\(v_{\mathrm{S}} = \sqrt{\mu/\rho}\)

What this formula means

S-wave velocity is the propagation speed of shear seismic waves in an elastic solid. It is determined by the shear modulus divided by the material density.

Scientific principle

Principle

S-waves are transverse elastic waves in which particle motion is perpendicular to the direction of propagation. Their restoring force comes from the medium's resistance to shear deformation.

Derivation

  • 1. A transverse elastic disturbance produces shear deformation in a solid.

  • 2. The resistance to shear deformation is represented by the shear modulus μ.

  • 3. For an isotropic linear elastic solid, the shear-wave equation contains the ratio μ/ρ.

  • 4. The propagation speed is the square root of the shear modulus divided by density.

  • 5. Therefore, v_S = √(μ/ρ).

Final Result

v_S = √(μ/ρ)

Related Relation

μ = ρv_S²

Variables and their meanings

SymbolMeaningUnit

v_S

S-wave propagation velocity

m/s

μ

Shear modulus or rigidity modulus

Pa

ρ

Mass density of the medium

kg/m³

SI units and conversions

Velocity

m/s

Shear Modulus

Pa

Density

kg/m³

Dimensional Formula

Velocity: [L T⁻¹]

Conditions of use

  • The material is assumed to be an isotropic, homogeneous, linear elastic solid.

  • The shear modulus and density must be measured under consistent conditions.

  • The equation describes bulk shear-wave propagation.

  • The material must have a positive shear modulus for a nonzero elastic S-wave speed.

Limitations and assumptions

  • An ideal fluid has approximately zero static shear modulus and therefore does not support ordinary propagating elastic S-waves.

  • Real rocks may be anisotropic and fractured, causing direction-dependent velocities.

  • The equation does not account for seismic attenuation or frequency-dependent dispersion.

  • S-wave velocity may vary with pressure, temperature, porosity, and fluid saturation.

  • It does not directly describe surface-wave propagation.

Step-by-step worked examples

ProblemSolutionAnswer

A rock has a shear modulus of 30 GPa and density of 2,500 kg/m³. Calculate its S-wave velocity.

  • Given: μ = 30 × 10⁹ Pa and ρ = 2,500 kg/m³.

  • Use: v_S = √(μ/ρ).

  • v_S = √[(30 × 10⁹)/2,500].

  • v_S = √(12 × 10⁶).

  • v_S ≈ 3,464 m/s.

The S-wave velocity is approximately 3.46 km/s.

A solid has an S-wave velocity of 4,000 m/s and density of 2,700 kg/m³. Calculate its shear modulus.

  • Given: v_S = 4,000 m/s and ρ = 2,700 kg/m³.

  • Use: μ = ρv_S².

  • μ = 2,700 × 4,000².

  • μ = 2,700 × 16,000,000.

  • μ = 43,200,000,000 Pa.

  • μ = 43.2 GPa.

The shear modulus is 43.2 GPa.

Real-world applications

  • Shear-wave seismic surveys

  • Earthquake wave analysis

  • Subsurface rigidity estimation

  • Seismic hazard characterization

  • Geotechnical and engineering geophysics

Formula Meaning

S-wave velocity is the propagation speed of shear seismic waves in an elastic solid. It is determined by the shear modulus divided by the material density.

Sources and further reading

No source has been supplied for this item yet. Treat the claim as needing editorial verification.

← Back to Formula Hub · Suggest a correction or source