Local magnitude is calculated from the logarithm of a measured seismic-wave amplitude corrected by a distance-dependent reference amplitude. It was originally developed for local earthquakes in southern California.
Richter Local Magnitude
Local magnitude is calculated from the logarithm of a measured seismic-wave amplitude corrected by a distance-dependent reference amplitude. It was originally developed for local earthquakes in southern California.
\(M_{\mathrm{L}} = log_{10}(A) - log_{10}(A_{0}(\Delta))\)
What this formula means
Scientific principle
Principle
Seismic-wave amplitude generally decreases with distance from an earthquake because of geometrical spreading and energy attenuation. Local magnitude corrects measured amplitude using a calibrated reference function for the source-to-station distance.
Derivation
1. Let A be the maximum recorded seismic-wave amplitude on the specified calibrated instrument.
2. Let A₀(Δ) be the reference amplitude associated with epicentral distance Δ for a standard reference earthquake.
3. The amplitude ratio A/A₀(Δ) compares the recorded signal with the reference signal.
4. Local magnitude is defined as the base-10 logarithm of this amplitude ratio.
5. Using logarithm rules gives M_L = log₁₀(A) − log₁₀(A₀(Δ)).
Final Result
M_L = log₁₀[A/A₀(Δ)]
Note
The original Richter scale used a standardized Wood-Anderson torsion seismograph and a regionally calibrated distance correction.
Variables and their meanings
| Symbol | Meaning | Unit |
|---|---|---|
M_L | Local earthquake magnitude | Dimensionless magnitude |
A | Measured maximum seismic-wave amplitude using the specified calibration | Instrument-dependent amplitude unit |
A₀(Δ) | Reference amplitude at epicentral distance Δ | Same unit as A |
Δ | Epicentral distance between earthquake epicentre and recording station | km in the applicable calibration |
SI units and conversions
Local Magnitude
Dimensionless
Amplitude Ratio
Dimensionless
Distance
km for the corresponding regional calibration
Dimensional Formula
Magnitude: dimensionless
Conditions of use
The amplitude must be measured using the specified instrument response or an appropriate equivalent calibration.
The reference function A₀(Δ) must match the applicable regional magnitude scale.
The recorded amplitude and reference amplitude must use the same amplitude units.
The original Richter relation is intended for local earthquakes within its calibration range.
The logarithm is base 10.
Limitations and assumptions
The original Richter scale was developed for a specific regional setting and instrument.
Local magnitude can saturate for large earthquakes and may underestimate their relative size.
Different regional networks may use different calibration functions.
Instrument response, attenuation, geology, and station conditions affect measured amplitude.
Local magnitude is not interchangeable with moment magnitude.
Step-by-step worked examples
| Problem | Solution | Answer |
|---|---|---|
At a particular calibrated distance, a seismic station records an amplitude 100 times the reference amplitude. Calculate the local magnitude using the amplitude-ratio relation. |
| The local magnitude under the stated calibration is 2. |
A calibrated seismic record has an amplitude ratio A/A₀(Δ) = 1,000. Calculate its local magnitude. |
| The local magnitude under the stated calibration is 3. |
Real-world applications
Local earthquake monitoring
Regional seismic network analysis
Historical earthquake magnitude comparison
Seismic station data interpretation
Earthquake catalogue preparation
Formula Meaning
Local magnitude is calculated from the logarithm of a measured seismic-wave amplitude corrected by a distance-dependent reference amplitude. It was originally developed for local earthquakes in southern California.
Sources and further reading
No source has been supplied for this item yet. Treat the claim as needing editorial verification.