✦ScienexySCIENCE KNOWLEDGE LIBRARY
General science · SCI-FORM-ENG-1797

Seismic Energy from Magnitude

This empirical relation estimates the radiated seismic energy of an earthquake from its magnitude. In this conventional form, E is expressed in joules and M is the magnitude value used by the applicable energy-magnitude relation.

\(log_{10}E = 1.5M + 4.8\)

What this formula means

This empirical relation estimates the radiated seismic energy of an earthquake from its magnitude. In this conventional form, E is expressed in joules and M is the magnitude value used by the applicable energy-magnitude relation.

Scientific principle

Principle

Earthquake magnitude is logarithmic. Larger magnitude earthquakes generally release much greater radiated seismic energy, and the energy increase is approximately exponential with magnitude.

Derivation

  • 1. An empirical magnitude-energy relation is commonly written as log₁₀E = 1.5M + 4.8.

  • 2. Here E is radiated seismic energy in joules.

  • 3. Rearranging gives E = 10^(1.5M + 4.8) J.

  • 4. For a magnitude increase ΔM, the energy ratio is E₂/E₁ = 10^(1.5ΔM).

  • 5. Thus, an increase of one magnitude unit corresponds to approximately 31.6 times greater radiated energy under this relation.

Final Result

E = 10^(1.5M + 4.8) J

Energy Ratio Relation

E₂/E₁ = 10^[1.5(M₂ − M₁)]

Variables and their meanings

SymbolMeaningUnit

E

Estimated radiated seismic energy

J

M

Magnitude value used in the empirical energy relation

Dimensionless

ΔM

Difference between two earthquake magnitude values

Dimensionless

SI units and conversions

Energy

J

Magnitude

Dimensionless

Dimensional Formula

Energy: [M L² T⁻²]

Conditions of use

  • The stated relation assumes radiated seismic energy is expressed in joules.

  • The magnitude convention must be compatible with the empirical relation.

  • The logarithm is base 10.

  • The result is an approximate energy estimate rather than a direct measurement.

  • For comparing two earthquakes, use the magnitude difference in the energy-ratio relation.

Limitations and assumptions

  • The relation is empirical and does not describe every earthquake's source physics exactly.

  • Radiated seismic energy is different from total energy released through all earthquake processes.

  • The relation should not be confused with the seismic moment-magnitude equation.

  • Earthquakes with the same magnitude can have different stress drops and radiated energy.

  • Magnitude-scale conventions and energy-estimation methods can introduce differences.

Step-by-step worked examples

ProblemSolutionAnswer

Estimate the radiated seismic energy of an earthquake with magnitude M = 5.

  • Given: M = 5.

  • Use: log₁₀E = 1.5M + 4.8.

  • log₁₀E = 1.5 × 5 + 4.8.

  • log₁₀E = 7.5 + 4.8 = 12.3.

  • E = 10^12.3 J.

  • E ≈ 1.995 × 10¹² J.

The estimated radiated seismic energy is approximately 2.0 × 10¹² J.

Using the empirical relation, compare the radiated energy of magnitude 6 and magnitude 4 earthquakes.

  • Given: M₂ = 6 and M₁ = 4.

  • Magnitude difference: ΔM = 6 − 4 = 2.

  • Use: E₂/E₁ = 10^(1.5ΔM).

  • E₂/E₁ = 10^(1.5 × 2).

  • E₂/E₁ = 10³.

  • E₂/E₁ = 1,000.

The magnitude 6 earthquake has an estimated radiated energy approximately 1,000 times that of the magnitude 4 earthquake under this relation.

Real-world applications

  • Earthquake energy estimation

  • Magnitude-energy comparisons

  • Seismic hazard research

  • Earthquake source studies

  • Geophysical data interpretation

Formula Meaning

This empirical relation estimates the radiated seismic energy of an earthquake from its magnitude. In this conventional form, E is expressed in joules and M is the magnitude value used by the applicable energy-magnitude relation.

Sources and further reading

No source has been supplied for this item yet. Treat the claim as needing editorial verification.

← Back to Formula Hub · Suggest a correction or source