The P–S travel-time difference is the difference between the arrival times of S-waves and P-waves at a seismic station. Because P-waves normally travel faster than S-waves, the difference increases with propagation distance in a homogeneous medium.
Travel-Time Difference for P and S Waves
The P–S travel-time difference is the difference between the arrival times of S-waves and P-waves at a seismic station. Because P-waves normally travel faster than S-waves, the difference increases with propagation distance in a homogeneous medium.
\(\Delta t = d(1/v_{\mathrm{S}} - 1/v_{\mathrm{P}})\)
What this formula means
Scientific principle
Principle
P-waves generally arrive before S-waves because their propagation velocity is higher. The separation between their arrival times provides information about the distance between an earthquake source and a recording station.
Derivation
1. Let d be the propagation distance in a homogeneous medium.
2. P-wave travel time is t_P = d/v_P.
3. S-wave travel time is t_S = d/v_S.
4. Since v_P is greater than v_S, t_S is greater than t_P.
5. Define the arrival-time difference as Δt = t_S − t_P.
6. Substituting the travel-time equations gives Δt = d/v_S − d/v_P.
7. Factoring out d gives Δt = d(1/v_S − 1/v_P).
Final Result
Δt = t_S − t_P = d(1/v_S − 1/v_P)
Distance Relation
d = Δt/[1/v_S − 1/v_P]
Variables and their meanings
| Symbol | Meaning | Unit |
|---|---|---|
Δt | Difference between S-wave and P-wave arrival times | s |
t_S | S-wave travel time | s |
t_P | P-wave travel time | s |
d | Propagation distance in the assumed homogeneous medium | m or km |
v_P | P-wave velocity | m/s or km/s |
v_S | S-wave velocity | m/s or km/s |
SI units and conversions
Time Difference
s
Distance
m or km
Velocity
m/s or km/s
Dimensional Formula
Time: [T]
Conditions of use
The P-wave and S-wave must travel along approximately the same path.
The simple formula assumes constant P-wave and S-wave velocities along the path.
The S-wave must arrive after the P-wave.
Distance and velocity units must be consistent.
For layered Earth models, the travel-time integral should replace the constant-velocity approximation.
Limitations and assumptions
Real Earth structure is heterogeneous and layered.
P-wave and S-wave ray paths may differ because of refraction.
Anisotropy can cause direction-dependent wave velocities.
Incorrect phase identification can produce an inaccurate arrival-time difference.
The equation estimates source-to-station path distance, not automatically the epicentral distance or hypocentral distance in a complex Earth model.
Step-by-step worked examples
| Problem | Solution | Answer |
|---|---|---|
A P-wave travels through a homogeneous region at 6 km/s, while an S-wave travels at 3.5 km/s. If the source is 42 km from the station along the common path, calculate the arrival-time difference. |
| The S-wave arrives approximately 5 seconds after the P-wave. |
A seismic station records a P–S arrival-time difference of 8 seconds. If v_P = 8 km/s and v_S = 4 km/s in a homogeneous model, estimate the propagation distance. |
| The estimated propagation distance is 64 km. |
Real-world applications
Earthquake source-distance estimation
Seismic station analysis
Earthquake early-warning research
Seismic phase identification
Regional earthquake monitoring
Formula Meaning
The P–S travel-time difference is the difference between the arrival times of S-waves and P-waves at a seismic station. Because P-waves normally travel faster than S-waves, the difference increases with propagation distance in a homogeneous medium.
Sources and further reading
No source has been supplied for this item yet. Treat the claim as needing editorial verification.