Hypocentral distance can be estimated from the difference between P-wave and S-wave travel times when both waves propagate along the same straight path through a homogeneous medium with constant velocities.
Hypocentral Distance from Travel Times
Hypocentral distance can be estimated from the difference between P-wave and S-wave travel times when both waves propagate along the same straight path through a homogeneous medium with constant velocities.
\(r = \Delta t v_{\mathrm{P}} v_{\mathrm{S}}/(v_{\mathrm{P}} - v_{\mathrm{S}})\)
What this formula means
Scientific principle
Principle
The hypocentre is the point inside the Earth where an earthquake rupture begins. The distance from the hypocentre to a seismic station can be estimated using the difference in arrival times of P-waves and S-waves under a simplified constant-velocity model.
Derivation
1. Let r represent the source-to-station hypocentral distance.
2. P-wave travel time is t_P = r/v_P.
3. S-wave travel time is t_S = r/v_S.
4. The observed arrival-time difference is Δt = t_S − t_P.
5. Substitute the travel-time expressions: Δt = r/v_S − r/v_P.
6. Factor out r: Δt = r(1/v_S − 1/v_P).
7. Combine the fractions: Δt = r(v_P − v_S)/(v_Pv_S).
8. Rearranging gives r = Δt v_Pv_S/(v_P − v_S).
Final Result
r = Δt v_P v_S/(v_P − v_S)
Related Relations
t_P = r/v_P
t_S = r/v_S
Δt = t_S − t_P
Variables and their meanings
| Symbol | Meaning | Unit |
|---|---|---|
r | Hypocentral source-to-station distance under the assumed propagation model | m or km |
Δt | Difference between S-wave and P-wave arrival times | s |
v_P | P-wave propagation velocity | m/s or km/s |
v_S | S-wave propagation velocity | m/s or km/s |
t_P | P-wave travel time | s |
t_S | S-wave travel time | s |
SI units and conversions
Hypocentral Distance
m or km
Time Difference
s
Velocity
m/s or km/s
Dimensional Formula
Distance: [L]
Conditions of use
The P-wave and S-wave are assumed to travel along the same straight path.
The model assumes constant P-wave and S-wave velocities.
P-wave velocity must be greater than S-wave velocity.
The measured time difference must be positive.
The formula estimates a source-to-station distance; it does not independently determine the three-dimensional hypocentre coordinates.
Limitations and assumptions
Actual seismic ray paths bend because Earth materials have different velocities.
Layering and refraction can make the constant-velocity approximation inaccurate.
A single station provides a distance estimate but generally cannot uniquely locate the hypocentre.
Accurate earthquake location normally combines arrival-time data from multiple stations with a velocity model.
The formula does not directly separate focal depth from epicentral distance.
Step-by-step worked examples
| Problem | Solution | Answer |
|---|---|---|
A seismic station records an S–P time difference of 5 seconds. Assume v_P = 6 km/s and v_S = 3.5 km/s. Estimate the hypocentral distance using a homogeneous model. |
| The estimated hypocentral distance is 42 km. |
The P–S arrival-time difference is 10 seconds. In a simplified homogeneous model, v_P = 8 km/s and v_S = 4.5 km/s. Calculate the source-to-station distance. |
| The estimated hypocentral distance is approximately 102.86 km. |
Real-world applications
Earthquake hypocentre estimation
Seismic network location analysis
P-wave and S-wave arrival-time interpretation
Earthquake monitoring systems
Introductory seismic travel-time modelling
Formula Meaning
Hypocentral distance can be estimated from the difference between P-wave and S-wave travel times when both waves propagate along the same straight path through a homogeneous medium with constant velocities.
Sources and further reading
No source has been supplied for this item yet. Treat the claim as needing editorial verification.