Thermal diffusivity describes how rapidly a material responds to temperature changes by conducting thermal energy relative to its ability to store heat. It is the ratio of thermal conductivity to volumetric heat capacity.
Thermal Diffusivity
Thermal diffusivity describes how rapidly a material responds to temperature changes by conducting thermal energy relative to its ability to store heat. It is the ratio of thermal conductivity to volumetric heat capacity.
\(\alpha = k/(\rho c_{p})\)
What this formula means
Scientific principle
Principle
Heat conduction depends on thermal conductivity, while temperature change also depends on the material's capacity to store thermal energy. Thermal diffusivity combines these properties to describe the rate at which temperature disturbances spread through a material.
Derivation
1. Fourier's law of heat conduction relates heat flux to the temperature gradient: q̇'' = −k∇T.
2. The local energy balance for a stationary, homogeneous material without internal heat generation is ρcₚ(∂T/∂t) = k∇²T.
3. Divide both sides by ρcₚ.
4. The equation becomes ∂T/∂t = [k/(ρcₚ)]∇²T.
5. Define the coefficient k/(ρcₚ) as thermal diffusivity α.
6. Therefore, α = k/(ρcₚ).
Final Result
α = k/(ρcₚ)
Heat Diffusion Equation
∂T/∂t = α∇²T
Interpretation
A larger thermal diffusivity generally means temperature disturbances spread more rapidly through the material under comparable conditions.
Variables and their meanings
| Symbol | Meaning | Unit |
|---|---|---|
α | Thermal diffusivity | m²/s |
k | Thermal conductivity | W/(m·K) |
ρ | Mass density | kg/m³ |
cₚ | Specific heat capacity at constant pressure | J/(kg·K) |
T | Temperature | K or °C for temperature differences |
t | Time | s |
SI units and conversions
Thermal Diffusivity
m²/s
Thermal Conductivity
W/(m·K)
Density
kg/m³
Specific Heat Capacity
J/(kg·K)
Conditions of use
The material is treated as homogeneous and isotropic.
Thermal conductivity, density, and specific heat capacity are treated as constant over the temperature range considered.
The material is stationary, with no bulk fluid motion.
The basic heat-diffusion equation assumes no internal heat generation.
All material properties must use compatible SI units.
Limitations and assumptions
Thermal diffusivity may vary with temperature.
Anisotropic materials require direction-dependent thermal properties.
Phase changes require additional energy-balance treatment.
Convection and radiation are not represented by this material property alone.
The formula describes a material property, not the complete heat-transfer rate in a particular system.
Step-by-step worked examples
| Problem | Solution | Answer |
|---|---|---|
A solid material has thermal conductivity 200 W/(m·K), density 8,000 kg/m³, and specific heat capacity 500 J/(kg·K). Calculate its thermal diffusivity. |
| The thermal diffusivity is 5.0 × 10⁻⁵ m²/s. |
A material has thermal conductivity 0.8 W/(m·K), density 2,000 kg/m³, and specific heat capacity 800 J/(kg·K). Determine its thermal diffusivity. |
| The thermal diffusivity is 5.0 × 10⁻⁷ m²/s. |
Real-world applications
Thermal engineering
Building insulation analysis
Heat-treatment processes
Material selection and characterization
Thermal management of electronic components
Prediction of temperature distribution in solids
Formula Meaning
Thermal diffusivity describes how rapidly a material responds to temperature changes by conducting thermal energy relative to its ability to store heat. It is the ratio of thermal conductivity to volumetric heat capacity.
Sources and further reading
No source has been supplied for this item yet. Treat the claim as needing editorial verification.