Specific heat capacity is the amount of thermal energy required to raise the temperature of a unit mass of a substance by one unit of temperature, under the specified conditions. Calorimetry determines it by measuring heat transfer, mass, and temperature change.
Specific Heat Capacity from Calorimetry
Specific heat capacity is the amount of thermal energy required to raise the temperature of a unit mass of a substance by one unit of temperature, under the specified conditions. Calorimetry determines it by measuring heat transfer, mass, and temperature change.
\(c = q/(m\Delta T)\)
What this formula means
Scientific principle
Principle
When a substance receives or releases thermal energy without undergoing a phase change, its temperature change is related to the transferred heat, mass, and specific heat capacity. In a simple calorimetric model, heat transfer is proportional to mass and temperature change.
Derivation
1. For a substance undergoing a temperature change without a phase transition, the heat relation is q = mcΔT.
2. Here, q represents the thermal energy transferred to the substance.
3. Rearrange the equation by dividing both sides by mΔT.
4. The specific heat capacity is obtained as c = q/(mΔT).
5. The result depends on the assumption that the measured heat is correctly attributed to the substance.
Final Result
c = q/(mΔT)
Temperature Change
ΔT = T_final − T_initial
Heat Relation
q = mcΔT
Calorimeter Energy Balance
For an ideal insulated system: Σqᵢ = 0
Variables and their meanings
| Symbol | Meaning | Unit |
|---|---|---|
c | Specific heat capacity | J/(kg·K) |
q | Heat transferred to or from the substance | J |
m | Mass of the substance | kg |
ΔT | Temperature change | K or °C |
T_initial | Initial temperature | K or °C |
T_final | Final temperature | K or °C |
SI units and conversions
Specific Heat Capacity
J/(kg·K)
Heat
J
Mass
kg
Temperature Change
K or °C
Conditions of use
The substance does not undergo a phase transition during the measured temperature interval.
Specific heat capacity is approximately constant over the temperature range considered.
Heat transferred to the substance is measured or reliably determined.
Mass is expressed in kilograms when using SI units.
Heat losses to the surroundings and calorimeter must be negligible or corrected for.
Limitations and assumptions
The simple equation assumes constant specific heat capacity over the temperature interval.
Heat absorbed by the calorimeter can affect the result.
Heat exchange with the surroundings can introduce systematic error.
Phase transitions require latent heat terms rather than the simple temperature-change relation alone.
For gases, the specific heat capacity depends on the thermodynamic conditions, such as constant pressure or constant volume.
Step-by-step worked examples
| Problem | Solution | Answer |
|---|---|---|
A 0.5 kg sample absorbs 4,500 J of heat, and its temperature rises by 10 K. Calculate its specific heat capacity. |
| The specific heat capacity is 900 J/(kg·K). |
A 2 kg material absorbs 12,000 J of thermal energy while its temperature increases from 20°C to 30°C. Determine its specific heat capacity. |
| The specific heat capacity is 600 J/(kg·K). |
Real-world applications
Calorimetry experiments
Material identification
Thermal engineering
Food and process engineering
Energy storage calculations
Comparison of thermal properties of substances
Formula Meaning
Specific heat capacity is the amount of thermal energy required to raise the temperature of a unit mass of a substance by one unit of temperature, under the specified conditions. Calorimetry determines it by measuring heat transfer, mass, and temperature change.
Sources and further reading
No source has been supplied for this item yet. Treat the claim as needing editorial verification.