✦ScienexySCIENCE KNOWLEDGE LIBRARY
General science · SCI-FORM-ENG-2258

Volumetric Strain

Volumetric strain is the fractional change in volume of a material relative to its original volume. It describes volumetric deformation caused by applied forces, pressure, or other physical influences.

\(\epsilon_{v} = \Delta V/V_{0} = (V_{\mathrm{final}} - V_{0})/V_{0}\)

What this formula means

Volumetric strain is the fractional change in volume of a material relative to its original volume. It describes volumetric deformation caused by applied forces, pressure, or other physical influences.

Scientific principle

Principle

When a material is subjected to mechanical loading or pressure, its volume may increase or decrease. Volumetric strain measures this change relative to the original volume, making it a dimensionless measure of volumetric deformation.

Derivation

  • 1. Let V₀ represent the original volume of a material.

  • 2. Let V_final represent its volume after deformation.

  • 3. Calculate the volume change: ΔV = V_final − V₀.

  • 4. Divide the volume change by the original volume.

  • 5. The resulting dimensionless ratio is the volumetric strain.

Final Result

εᵥ = (V_final − V₀)/V₀

Volume Change Relation

ΔV = V_final − V₀

Small Strain Relation

εᵥ ≈ εₓ + εᵧ + ε_z

Interpretation

Positive volumetric strain represents expansion, while negative volumetric strain represents contraction.

Variables and their meanings

SymbolMeaningUnit

εᵥ

Volumetric strain

Dimensionless

ΔV

Change in volume

m³

V₀

Original volume

m³

V_final

Final volume after deformation

m³

εₓ

Normal strain in the x-direction

Dimensionless

εᵧ

Normal strain in the y-direction

Dimensionless

ε_z

Normal strain in the z-direction

Dimensionless

SI units and conversions

Volumetric Strain

Dimensionless, sometimes expressed as a percentage

Volume Change

m³

Original Volume

m³

Final Volume

m³

Conditions of use

  • The original volume must be nonzero.

  • Original and final volumes must use compatible units.

  • The deformation must be sufficiently well-defined for the volume comparison.

  • The small-strain relation using normal strains assumes small deformation.

  • The sign convention must be consistent with expansion and contraction.

Limitations and assumptions

  • Volumetric strain does not describe the shape change of a material by itself.

  • The small-strain approximation may be inaccurate for large deformations.

  • Shear strain does not directly appear in the first-order volumetric strain expression.

  • For anisotropic or nonlinear materials, the relationship between stress and volumetric strain requires an appropriate constitutive model.

  • The formula measures volume change but does not identify its physical cause.

Step-by-step worked examples

ProblemSolutionAnswer

A material initially occupies 0.020 m³ and expands to 0.021 m³. Calculate its volumetric strain.

  • Given: V₀ = 0.020 m³.

  • V_final = 0.021 m³.

  • ΔV = 0.021 − 0.020 = 0.001 m³.

  • εᵥ = ΔV/V₀.

  • εᵥ = 0.001/0.020.

  • εᵥ = 0.05.

The volumetric strain is +0.05, equivalent to 5% expansion.

A component has an original volume of 500 cm³ and a final volume of 490 cm³. Determine its volumetric strain.

  • Given: V₀ = 500 cm³.

  • V_final = 490 cm³.

  • ΔV = 490 − 500 = −10 cm³.

  • εᵥ = −10/500.

  • εᵥ = −0.02.

The volumetric strain is −0.02, equivalent to 2% contraction.

Real-world applications

  • Strength of materials

  • Pressure-vessel analysis

  • Geotechnical engineering

  • Elastic deformation studies

  • Material testing

  • Structural mechanics

Formula Meaning

Volumetric strain is the fractional change in volume of a material relative to its original volume. It describes volumetric deformation caused by applied forces, pressure, or other physical influences.

Sources and further reading

No source has been supplied for this item yet. Treat the claim as needing editorial verification.

← Back to Formula Hub · Suggest a correction or source