✦ScienexySCIENCE KNOWLEDGE LIBRARY
General science · SCI-FORM-ENG-2260

Transformer Turns Ratio

The transformer turns ratio relates the number of turns in the secondary winding to the number of turns in the primary winding. For an ideal transformer, the voltage ratio equals the turns ratio, while the current ratio is its reciprocal.

\(N_{s}/N_{p} = V_{s}/V_{p} = I_{p}/I_{s} (\text{ ideal transformer})\)

What this formula means

The transformer turns ratio relates the number of turns in the secondary winding to the number of turns in the primary winding. For an ideal transformer, the voltage ratio equals the turns ratio, while the current ratio is its reciprocal.

Scientific principle

Principle

A transformer transfers electrical energy between circuits through mutual electromagnetic induction. An alternating magnetic flux links the primary and secondary windings and induces electromotive forces proportional to their respective numbers of turns.

Derivation

  • 1. Faraday's law states that the induced electromotive force is proportional to the number of winding turns and the rate of change of magnetic flux.

  • 2. For the primary winding, Vₚ is proportional to Nₚ under the ideal transformer model.

  • 3. For the secondary winding, Vₛ is proportional to Nₛ.

  • 4. Dividing the secondary voltage relation by the primary voltage relation gives Vₛ/Vₚ = Nₛ/Nₚ.

  • 5. For an ideal transformer, input power equals output power: VₚIₚ = VₛIₛ.

  • 6. Combining the voltage and power relations gives Iₚ/Iₛ = Nₛ/Nₚ.

  • 7. Therefore, the ideal transformer voltage ratio equals the turns ratio, while the current ratio is reciprocal.

Final Result

Vₛ/Vₚ = Nₛ/Nₚ

Current Relation

Iₚ/Iₛ = Nₛ/Nₚ

Ideal Power Relation

VₚIₚ = VₛIₛ

Step Up Condition

Nₛ > Nₚ implies Vₛ > Vₚ

Step Down Condition

Nₛ < Nₚ implies Vₛ < Vₚ

Interpretation

A transformer with more secondary turns than primary turns is an ideal step-up transformer, while one with fewer secondary turns is an ideal step-down transformer.

Variables and their meanings

SymbolMeaningUnit

Nₚ

Number of turns in the primary winding

Turns

Nₛ

Number of turns in the secondary winding

Turns

Vₚ

Primary winding voltage

V

Vₛ

Secondary winding voltage

V

Iₚ

Primary winding current

A

Iₛ

Secondary winding current

A

SI units and conversions

Turns Ratio

Dimensionless

Voltage Ratio

Dimensionless

Current Ratio

Dimensionless

Winding Turns

Turns

Voltage

V

Current

A

Conditions of use

  • The ideal ratio applies to an ideal transformer model.

  • The transformer operates with changing magnetic flux, normally supplied by alternating current.

  • Primary and secondary voltages must be measured using consistent voltage conventions, such as RMS values.

  • The basic relation assumes negligible winding resistance, leakage flux, and core losses.

  • The transformer must operate within its intended magnetic and electrical limits.

Limitations and assumptions

  • Real transformers have copper losses, core losses, leakage flux, and voltage drops.

  • The actual loaded secondary voltage can differ from the ideal turns-ratio prediction.

  • The simple relationship does not describe transformer efficiency by itself.

  • A conventional transformer does not operate through steady DC excitation because changing magnetic flux is required for sustained induction.

  • The current relation is an ideal magnitude relationship; practical phase relationships depend on the load and transformer behavior.

Step-by-step worked examples

ProblemSolutionAnswer

An ideal transformer has 500 primary turns and 100 secondary turns. If the primary voltage is 240 V RMS, calculate the secondary voltage.

  • Given: Nₚ = 500 turns.

  • Nₛ = 100 turns.

  • Vₚ = 240 V.

  • Use: Vₛ/Vₚ = Nₛ/Nₚ.

  • Vₛ = 240 × (100/500).

  • Vₛ = 240 × 0.2.

  • Vₛ = 48 V.

The ideal secondary voltage is 48 V RMS. This is a step-down transformer.

An ideal transformer has 200 primary turns and 800 secondary turns. If the primary voltage is 50 V RMS, determine the secondary voltage.

  • Given: Nₚ = 200 turns.

  • Nₛ = 800 turns.

  • Vₚ = 50 V.

  • Turns ratio = 800/200 = 4.

  • Secondary voltage = 50 × 4.

  • Vₛ = 200 V RMS.

The ideal secondary voltage is 200 V RMS. This is a step-up transformer.

Real-world applications

  • Electrical power transmission

  • Voltage conversion in power supplies

  • Electrical isolation

  • Distribution transformers

  • Electronic equipment

  • AC electrical engineering

Formula Meaning

The transformer turns ratio relates the number of turns in the secondary winding to the number of turns in the primary winding. For an ideal transformer, the voltage ratio equals the turns ratio, while the current ratio is its reciprocal.

Sources and further reading

No source has been supplied for this item yet. Treat the claim as needing editorial verification.

← Back to Formula Hub · Suggest a correction or source