✦ScienexySCIENCE KNOWLEDGE LIBRARY
General science · SCI-FORM-FLU-003

Continuity Equation for Incompressible Flow

For steady incompressible flow through a streamtube, the product of cross-sectional area and average flow speed remains constant.

\(A_{1}v_{1} = A_{2}v_{2}\)

What this formula means

Definition

For steady incompressible flow through a streamtube, the product of cross-sectional area and average flow speed remains constant.

Interpretation

When a pipe narrows, the fluid speed increases; when it widens, the speed decreases, provided the volume flow rate is conserved.

Physical Significance

It expresses conservation of mass and is used to analyse pipes, nozzles, channels and flow-measuring devices.

Scientific principle

Principle

Conservation of mass in a steady streamtube.

Derivation

StepExplanationExpression

1

In a time interval Δt, fluid crossing section 1 occupies a volume A₁v₁Δt.

ΔV₁ = A₁v₁Δt

2

The corresponding volume crossing section 2 is A₂v₂Δt.

ΔV₂ = A₂v₂Δt

3

For incompressible flow, equal volumes enter and leave during the same interval.

A₁v₁Δt = A₂v₂Δt

4

Cancel the nonzero time interval.

A₁v₁ = A₂v₂

Result

The volume flow rate Q = Av is constant along a streamtube for steady incompressible flow.

Variables and their meanings

SymbolMeaningDescription

A₁, A₂

Cross-sectional areas

Areas perpendicular to the local mean flow at sections 1 and 2.

v₁, v₂

Average flow speeds

Cross-sectional average speeds at the two sections.

Q

Volume flow rate

Volume of fluid passing a cross-section per unit time.

SI units and conversions

Si Unit

m³/s for Q; m² and m/s for A and v

Dimensional Formula

[L³T⁻¹] for Q

Unit Explanation

Area has dimension [L²] and speed [LT⁻¹], so Av has dimension [L³T⁻¹].

Unit Conversions

ConversionApplication

1 L/s = 10⁻³ m³/s

Convert litre-per-second flow rates to SI.

1 cm² = 10⁻⁴ m²

Convert pipe areas to square metres.

1 mm = 10⁻³ m

Convert pipe diameters before calculating area.

Conditions of use

  • Flow is steady at the sections considered.

  • The fluid density is effectively constant.

  • The sections belong to the same streamtube and there are no leaks or branches between them.

  • Use cross-sectional average speed, not necessarily the local speed at every point.

Limitations and assumptions

  • For compressible flow, use ρ₁A₁v₁ = ρ₂A₂v₂ instead.

  • Turbulence does not invalidate mass conservation, but velocity profiles may require careful averaging.

  • In branching networks, flow rates must be summed across all branches.

  • The simple form does not describe unsteady accumulation inside a control volume.

Step-by-step worked examples

ProblemGivenSolutionAnswer

Water flows through a pipe that narrows from area 8 cm² to 2 cm². If the average speed in the wider section is 1.5 m/s, find the speed in the narrower section.

  • A₁ = 8 cm²

  • A₂ = 2 cm²

  • v₁ = 1.5 m/s

StepExplanationCalculation

1

Write the incompressible continuity equation.

A₁v₁ = A₂v₂

2

Rearrange for the unknown speed.

v₂ = A₁v₁/A₂

3

Substitute the values using the area ratio.

v₂ = (8 × 1.5)/2 m/s

4

Evaluate.

v₂ = 6.0 m/s

The average speed in the narrower section is 6.0 m/s.

Real-world applications

ApplicationExplanation

Nozzles

A decreasing flow area raises the speed of an incompressible stream.

Water pipelines

Continuity helps relate pipe diameter to flow speed.

Venturi meters

Area and pressure changes are combined to infer flow rate.

Irrigation systems

Flow distribution through pipes and channels is analysed using mass conservation.

Topics

  • fluid mechanics

  • continuity equation

  • mass conservation

  • incompressible flow

  • volume flow rate

  • Fluid Mechanics

Formula Meaning

Definition

For steady incompressible flow through a streamtube, the product of cross-sectional area and average flow speed remains constant.

Interpretation

When a pipe narrows, the fluid speed increases; when it widens, the speed decreases, provided the volume flow rate is conserved.

Physical Significance

It expresses conservation of mass and is used to analyse pipes, nozzles, channels and flow-measuring devices.

Sources and further reading

No source has been supplied for this item yet. Treat the claim as needing editorial verification.

← Back to Formula Hub · Suggest a correction or source