✦ScienexySCIENCE KNOWLEDGE LIBRARY
General science · SCI-FORM-FLU-015

Capillary Rise in a Narrow Tube

The capillary-rise relation gives the vertical height to which a liquid rises or falls in a narrow cylindrical tube because of surface tension and the contact angle.

\(h = 2\gamma \cos\theta/(\rho gr)\)

What this formula means

Definition

The capillary-rise relation gives the vertical height to which a liquid rises or falls in a narrow cylindrical tube because of surface tension and the contact angle.

Interpretation

The height increases with surface tension and decreases with liquid density, gravitational acceleration and tube radius. The sign of cosθ distinguishes rise from depression.

Physical Significance

The equation connects microscopic surface interactions at a liquid boundary with a measurable macroscopic height difference.

Scientific principle

Principle

Vertical force balance between the surface-tension force along the tube circumference and the weight of the raised liquid column.

Derivation

StepExplanationExpression

1

For a tube of internal radius r, the vertical component of surface tension acts around the circumference 2πr.

Fγ = 2πrγ cosθ

2

The raised liquid column has approximate volume πr²h and weight ρgπr²h.

W = ρgπr²h

3

At equilibrium, balance the vertical surface-tension force with the column weight and solve for h.

2πrγ cosθ = ρgπr²h

4

Cancel common factors to obtain the capillary height.

h = 2γ cosθ/(ρgr)

Result

The capillary height is inversely proportional to tube radius and depends on surface tension, contact angle, liquid density and gravitational acceleration.

Variables and their meanings

SymbolMeaningDescription

h

Capillary height

Vertical rise above or depression below the external liquid level.

γ

Surface tension

Surface tension of the liquid against the surrounding fluid.

θ

Contact angle

Angle measured through the liquid at the tube wall.

ρ

Liquid density

Mass density of the liquid.

g

Gravitational acceleration

Local acceleration due to gravity.

r

Tube radius

Internal radius of the narrow cylindrical tube.

SI units and conversions

Si Unit

metre (m)

Dimensional Formula

[L]

Unit Explanation

Capillary height is a length. Use surface tension in N/m, density in kg/m³, gravitational acceleration in m/s² and radius in metres.

Unit Conversions

ConversionApplication

1 mm = 10⁻³ m

Convert tube radius measurements from millimetres to metres.

Conditions of use

  • The tube is narrow, straight and approximately cylindrical.

  • The liquid is in static equilibrium and the meniscus is well defined.

  • Surface tension and liquid density are treated as uniform.

  • The contact angle is measured through the liquid.

  • The tube radius is small enough that the capillary model is applicable.

Limitations and assumptions

  • The formula neglects significant wall and end effects beyond the contact-angle condition.

  • Contamination or surfactants can change surface tension and contact angle.

  • For noncircular tubes or complex geometries, the force balance must be modified.

  • Dynamic effects during rapid rise or fall are not described by the static relation.

Step-by-step worked examples

ProblemGivenSolutionAnswer

Water rises in a clean glass capillary of radius 0.50 mm. Take γ = 0.072 N/m, θ = 0°, ρ = 1000 kg/m³ and g = 9.8 m/s². Estimate the rise.

  • r = 0.50 mm = 5.0×10⁻⁴ m

  • γ = 0.072 N/m

  • θ = 0°

  • ρ = 1000 kg/m³

  • g = 9.8 m/s²

StepExplanationCalculation

1

Write the capillary-rise equation.

h = 2γ cosθ/(ρgr)

2

Substitute the given values, using cos0° = 1.

h = 2(0.072)(1)/[1000(9.8)(5.0×10⁻⁴)]

3

Evaluate the expression.

h = 0.144/4.9 ≈ 0.0294 m

The predicted capillary rise is approximately 0.029 m, or 2.9 cm.

A liquid has γ = 0.030 N/m, ρ = 800 kg/m³ and contact angle 60° in a tube of radius 1.0 mm. Find the capillary height using g = 9.8 m/s².

  • γ = 0.030 N/m

  • ρ = 800 kg/m³

  • θ = 60°

  • r = 1.0×10⁻³ m

  • g = 9.8 m/s²

StepExplanationCalculation

1

Use the capillary-height relation.

h = 2γ cosθ/(ρgr)

2

Substitute cos60° = 0.5.

h = 2(0.030)(0.5)/[800(9.8)(1.0×10⁻³)]

3

Calculate the height.

h = 0.030/7.84 ≈ 0.00383 m

The liquid rises approximately 3.83 mm.

Real-world applications

ApplicationExplanation

Porous materials

Capillary action helps explain how liquids move through small pores in paper, soil and building materials.

Plant water transport

Capillary effects contribute to liquid movement in narrow passages, alongside other biological transport mechanisms.

Laboratory capillary tubes

The relation helps estimate meniscus height and interpret measurements in narrow glass tubes.

Ink and microfluidic systems

Surface tension and contact angle influence passive liquid movement through narrow channels.

Formula Meaning

Definition

The capillary-rise relation gives the vertical height to which a liquid rises or falls in a narrow cylindrical tube because of surface tension and the contact angle.

Interpretation

The height increases with surface tension and decreases with liquid density, gravitational acceleration and tube radius. The sign of cosθ distinguishes rise from depression.

Physical Significance

The equation connects microscopic surface interactions at a liquid boundary with a measurable macroscopic height difference.

Sources and further reading

No source has been supplied for this item yet. Treat the claim as needing editorial verification.

← Back to Formula Hub · Suggest a correction or source