✦ScienexySCIENCE KNOWLEDGE LIBRARY
General science · SCI-FORM-INT-2167

Percentage Measurement Error

Percentage measurement error expresses relative measurement error as a percentage. It indicates the magnitude of the measurement deviation relative to the reference value.

\(\text{Percentage Error} = (\Delta x/|x_{\mathrm{reference}}|) \times 100\%\)

What this formula means

Percentage measurement error expresses relative measurement error as a percentage. It indicates the magnitude of the measurement deviation relative to the reference value.

Scientific principle

Principle

Percentage error is obtained by multiplying relative error by 100. This converts a dimensionless ratio into a percentage, making the magnitude of measurement deviation easier to communicate and compare.

Derivation

  • 1. Calculate the absolute measurement error: Δx = |x_measured − x_reference|.

  • 2. Divide the absolute error by the magnitude of the reference value.

  • 3. This gives relative error: εᵣ = Δx/|x_reference|.

  • 4. Multiply the relative error by 100.

  • 5. Therefore, percentage error = (Δx/|x_reference|) × 100%.

Final Result

Percentage Error = [|x_measured − x_reference|/|x_reference|] × 100%

Interpretation

A percentage error of 2% means that the absolute deviation is 2% of the magnitude of the reference value.

Variables and their meanings

SymbolMeaningUnit

Δx

Absolute measurement error

Same unit as x

x_measured

Experimental measurement

Unit of measured quantity

x_reference

Accepted reference value

Same unit as x_measured

εᵣ

Relative measurement error

Dimensionless

SI units and conversions

Percentage Error

%

Relative Error

Dimensionless

Absolute Error

Same unit as measured quantity

Conditions of use

  • The reference value must be nonzero.

  • Measured and reference values must represent the same quantity.

  • The values must be expressed in compatible units.

  • The absolute magnitude of the error is used for conventional percentage error.

Limitations and assumptions

  • Percentage error is undefined for a zero reference value.

  • It does not indicate the direction of the deviation.

  • A large percentage error can result from a small absolute error when the reference value is very small.

  • Percentage error measures deviation from a reference, whereas percentage uncertainty describes relative uncertainty.

  • The reference value should be sufficiently reliable for the comparison to be meaningful.

Step-by-step worked examples

ProblemSolutionAnswer

An experiment gives a measured acceleration of 9.6 m/s², while the reference value is 9.8 m/s². Calculate the percentage error.

  • Given: x_measured = 9.6 m/s².

  • x_reference = 9.8 m/s².

  • Absolute error: Δx = |9.6 − 9.8| = 0.2 m/s².

  • Percentage error = (0.2/9.8) × 100%.

  • Percentage error ≈ 2.0408%.

The percentage measurement error is approximately 2.04%.

A reference mass is 250 g, while an experimental result is 255 g. Find the percentage measurement error.

  • Given: x_reference = 250 g.

  • x_measured = 255 g.

  • Δx = |255 − 250| = 5 g.

  • Percentage error = (5/250) × 100%.

  • Percentage error = 2%.

The percentage measurement error is 2%.

Real-world applications

  • Laboratory experiment reporting

  • Scientific instrument calibration

  • Engineering quality control

  • Comparison of experimental results

  • Accuracy assessment in numerical measurements

Formula Meaning

Percentage measurement error expresses relative measurement error as a percentage. It indicates the magnitude of the measurement deviation relative to the reference value.

Sources and further reading

No source has been supplied for this item yet. Treat the claim as needing editorial verification.

← Back to Formula Hub · Suggest a correction or source