✦ScienexySCIENCE KNOWLEDGE LIBRARY
General science · SCI-FORM-INT-2168

Propagation of Independent Uncertainties (Sum)

When independent input quantities are added, their standard uncertainties combine through the square root of the sum of their squared standard uncertainties. This is the root-sum-of-squares method for uncertainty propagation.

\(u_{\mathrm{c}}(y) = \sqrt[u(x_{1})^{2} + u(x_{2})^{2} + \cdots + u(x_{n})^{2}], y = x_{1} + x_{2} + \cdots + x_{n}\)

What this formula means

When independent input quantities are added, their standard uncertainties combine through the square root of the sum of their squared standard uncertainties. This is the root-sum-of-squares method for uncertainty propagation.

Scientific principle

Principle

Independent random uncertainties do not generally add directly. Instead, their variances add. Since variance is the square of standard uncertainty, the combined standard uncertainty is obtained by taking the square root of the sum of the individual variances.

Derivation

  • 1. Consider y = x₁ + x₂ + ⋯ + xₙ.

  • 2. For independent input quantities, the variance of a sum equals the sum of the individual variances.

  • 3. Therefore, u²(y) = u²(x₁) + u²(x₂) + ⋯ + u²(xₙ).

  • 4. Take the square root of both sides.

  • 5. The combined standard uncertainty becomes u_c(y) = √[Σu²(xᵢ)].

Final Result

u_c(y) = √[Σᵢ₌₁ⁿ u²(xᵢ)]

Variance Relation

u_c²(y) = Σᵢ₌₁ⁿ u²(xᵢ)

General First Order Relation

u_c²(y) = Σᵢ₌₁ⁿ [∂f/∂xᵢ]²u²(xᵢ) for independent inputs and y = f(x₁, ..., xₙ)

Variables and their meanings

SymbolMeaningUnit

y

Calculated sum of input quantities

Same compatible unit as the inputs

xᵢ

Individual measured input quantity

Compatible unit

u(xᵢ)

Standard uncertainty of input quantity xᵢ

Same unit as xᵢ

u_c(y)

Combined standard uncertainty of the calculated result

Same unit as y

SI units and conversions

Combined Standard Uncertainty

Same unit as the calculated sum

Variance

Square of the corresponding physical unit

Input Uncertainty

Same unit as the corresponding input quantity

Conditions of use

  • Input quantities are statistically independent or their covariance is negligible.

  • The uncertainties are expressed as standard uncertainties.

  • Input quantities have compatible units for addition.

  • The uncertainty model is adequately represented by the stated sum.

  • For nonlinear functions, the general first-order propagation equation should be used when appropriate.

Limitations and assumptions

  • Direct root-sum-of-squares combination is not generally valid for correlated inputs.

  • Correlated quantities require covariance terms.

  • The method assumes the uncertainty estimates are meaningful standard uncertainties.

  • For strongly nonlinear functions or large uncertainties, first-order propagation may be inadequate.

  • Systematic effects must be evaluated rather than automatically treated as independent random uncertainties.

Step-by-step worked examples

ProblemSolutionAnswer

Two independent length measurements are added. Their standard uncertainties are 0.3 cm and 0.4 cm. Calculate the combined standard uncertainty of their sum.

  • Given: u(x₁) = 0.3 cm.

  • u(x₂) = 0.4 cm.

  • Use: u_c(y) = √[u(x₁)² + u(x₂)²].

  • u_c(y) = √[(0.3)² + (0.4)²] cm.

  • u_c(y) = √(0.09 + 0.16) cm.

  • u_c(y) = √0.25 cm = 0.5 cm.

The combined standard uncertainty is 0.5 cm.

Three independent measurements contribute to a calculated total. Their standard uncertainties are 1.0 m, 1.5 m, and 2.0 m. Determine the combined standard uncertainty.

  • Given: u₁ = 1.0 m, u₂ = 1.5 m, u₃ = 2.0 m.

  • u_c = √(u₁² + u₂² + u₃²).

  • u_c = √(1.0² + 1.5² + 2.0²) m.

  • u_c = √(1 + 2.25 + 4) m.

  • u_c = √7.25 m.

  • u_c ≈ 2.69 m.

The combined standard uncertainty is approximately 2.69 m.

Real-world applications

  • Combining independent length measurements

  • Laboratory measurement calculations

  • Uncertainty analysis in engineering

  • Physical quantity summation

  • Scientific data processing

Formula Meaning

When independent input quantities are added, their standard uncertainties combine through the square root of the sum of their squared standard uncertainties. This is the root-sum-of-squares method for uncertainty propagation.

Sources and further reading

No source has been supplied for this item yet. Treat the claim as needing editorial verification.

← Back to Formula Hub · Suggest a correction or source