✦ScienexySCIENCE KNOWLEDGE LIBRARY
General science · SCI-FORM-INT-2290

Van’t Hoff Equation

The Van’t Hoff equation describes how a thermodynamic equilibrium constant changes with temperature. It relates the temperature dependence of chemical equilibrium to the standard enthalpy change of the reaction.

\(d(\ln K)/dT = \Delta H^{\circ}/(RT^{2})\)

What this formula means

The Van’t Hoff equation describes how a thermodynamic equilibrium constant changes with temperature. It relates the temperature dependence of chemical equilibrium to the standard enthalpy change of the reaction.

Scientific principle

Principle

The equilibrium constant is connected to standard Gibbs free energy by ΔG° = −RT ln K. Combining this relation with the Gibbs–Helmholtz equation gives the temperature dependence of the equilibrium constant.

Derivation

  • 1. Begin with the thermodynamic relation ΔG° = −RT ln K.

  • 2. Apply the Gibbs–Helmholtz equation: d(ΔG°/T)/dT = −ΔH°/T².

  • 3. Since ΔG°/T = −R ln K, differentiate with respect to temperature.

  • 4. Substitute into the Gibbs–Helmholtz equation and rearrange.

  • 5. Obtain d(ln K)/dT = ΔH°/(RT²).

  • 6. If ΔH° is approximately constant over the temperature interval, integrate between T₁ and T₂.

  • 7. The integrated relation is ln(K₂/K₁) = −(ΔH°/R)(1/T₂ − 1/T₁).

Final Result

d(ln K)/dT = ΔH°/(RT²)

Integrated Form

ln(K₂/K₁) = −(ΔH°/R)(1/T₂ − 1/T₁)

Interpretation

For an endothermic reaction with positive ΔH°, the equilibrium constant generally increases with temperature. For an exothermic reaction with negative ΔH°, it generally decreases.

Variables and their meanings

SymbolMeaningUnit

K

Thermodynamic equilibrium constant

Dimensionless

T

Absolute temperature

K

ΔH°

Standard enthalpy change of the reaction

J/mol

R

Universal gas constant, approximately 8.314

J/(mol·K)

K₁, K₂

Equilibrium constants at temperatures T₁ and T₂

Dimensionless

T₁, T₂

Initial and final absolute temperatures

K

SI units and conversions

Equilibrium Constant

Dimensionless

Temperature

K

Standard Enthalpy Change

J/mol

Gas Constant

J/(mol·K)

Conditions of use

  • Temperatures must be expressed in kelvin.

  • The equilibrium constants must be dimensionless thermodynamic constants.

  • The integrated form assumes that ΔH° remains approximately constant over the selected temperature range.

  • The same reaction and standard-state convention must be used at both temperatures.

  • The gas constant and reaction enthalpy must use compatible energy units.

Limitations and assumptions

  • The integrated equation becomes less accurate over wide temperature intervals when reaction enthalpy changes substantially.

  • Heat-capacity changes may need to be included for accurate temperature-dependent calculations.

  • The equation describes equilibrium, not how quickly equilibrium is reached.

  • Nonideal systems require activities rather than uncorrected concentrations or partial pressures.

  • A change in reaction mechanism or phase can require a different thermodynamic treatment.

Step-by-step worked examples

ProblemSolutionAnswer

An endothermic reaction has ΔH° = 40,000 J/mol and equilibrium constant K₁ = 2.0 at T₁ = 300 K. Estimate K₂ at T₂ = 320 K, assuming constant reaction enthalpy.

  • Given: ΔH° = 40,000 J/mol.

  • K₁ = 2.0, T₁ = 300 K, and T₂ = 320 K.

  • Use: ln(K₂/K₁) = −(ΔH°/R)(1/T₂ − 1/T₁).

  • ln(K₂/2.0) = −(40,000/8.314)(1/320 − 1/300).

  • The right-hand side is approximately 1.002.

  • K₂/2.0 = exp(1.002).

  • K₂ ≈ 2.0 × 2.724.

  • K₂ ≈ 5.45.

The estimated equilibrium constant at 320 K is approximately 5.45.

An exothermic reaction has ΔH° = −30,000 J/mol and K₁ = 10 at 300 K. Estimate the equilibrium constant at 330 K.

  • Given: ΔH° = −30,000 J/mol.

  • K₁ = 10, T₁ = 300 K, and T₂ = 330 K.

  • Use: ln(K₂/K₁) = −(ΔH°/R)(1/T₂ − 1/T₁).

  • ln(K₂/10) = −(−30,000/8.314)(1/330 − 1/300).

  • The right-hand side is approximately −1.094.

  • K₂/10 = exp(−1.094).

  • K₂ ≈ 10 × 0.335.

  • K₂ ≈ 3.35.

The estimated equilibrium constant at 330 K is approximately 3.35, showing a decrease with increasing temperature for this exothermic reaction.

Real-world applications

  • Chemical equilibrium prediction

  • Temperature effects on reaction systems

  • Industrial chemical process design

  • Biochemical equilibrium studies

  • Thermodynamic data analysis

  • Determination of reaction enthalpy from equilibrium measurements

Formula Meaning

The Van’t Hoff equation describes how a thermodynamic equilibrium constant changes with temperature. It relates the temperature dependence of chemical equilibrium to the standard enthalpy change of the reaction.

Sources and further reading

No source has been supplied for this item yet. Treat the claim as needing editorial verification.

← Back to Formula Hub · Suggest a correction or source