✦ScienexySCIENCE KNOWLEDGE LIBRARY
General science · SCI-FORM-INT-2293

Nernst–Planck Ionic Flux Equation

The Nernst–Planck equation describes the flux of an ionic species through a solution under the combined effects of diffusion, electrical migration, and bulk convection. It is widely used to model ion transport in electrochemical and biological systems.

\(J_{i} = -D_{i}\nabla c_{i} - (z_{i}D_{i}F/RT)c_{i}\nabla\phi + c_{i}v\)

What this formula means

The Nernst–Planck equation describes the flux of an ionic species through a solution under the combined effects of diffusion, electrical migration, and bulk convection. It is widely used to model ion transport in electrochemical and biological systems.

Scientific principle

Principle

Ions move in response to gradients in electrochemical potential. Concentration gradients drive diffusion, electrical potential gradients drive migration of charged species, and fluid motion transports ions through convection.

Derivation

  • 1. Define the electrochemical potential of ionic species i as μᵢ = μᵢ° + RT ln aᵢ + zᵢFφ.

  • 2. Under an ideal dilute-solution approximation, activity aᵢ is proportional to concentration cᵢ.

  • 3. The diffusive and electrical contributions to flux can be represented through a mobility-based transport relation.

  • 4. Using the Einstein mobility relation gives the diffusion contribution −Dᵢ∇cᵢ.

  • 5. The electrical migration contribution becomes −(zᵢDᵢF/RT)cᵢ∇φ.

  • 6. Bulk fluid motion contributes the convective flux cᵢv.

  • 7. Adding the three contributions gives the Nernst–Planck flux equation.

Final Result

Jᵢ = −Dᵢ∇cᵢ − (zᵢDᵢF/RT)cᵢ∇φ + cᵢv

Zero Convection Form

Jᵢ = −Dᵢ∇cᵢ − (zᵢDᵢF/RT)cᵢ∇φ

Interpretation

The total ionic flux is the vector sum of diffusive, electrical migration, and convective contributions.

Variables and their meanings

SymbolMeaningUnit

Jᵢ

Molar flux density of ionic species i

mol/(m²·s)

Dᵢ

Diffusion coefficient of ionic species i

m²/s

cᵢ

Concentration of ionic species i

mol/m³

zᵢ

Signed charge number of ionic species i

Dimensionless

F

Faraday constant

C/mol

R

Universal gas constant

J/(mol·K)

T

Absolute temperature

K

φ

Electric potential

V

v

Bulk fluid velocity vector

m/s

∇

Spatial gradient operator

Depends on the differentiated quantity

SI units and conversions

Ionic Flux

mol/(m²·s)

Diffusion Coefficient

m²/s

Concentration

mol/m³

Electric Potential

V

Fluid Velocity

m/s

Temperature

K

Faraday Constant

C/mol

Conditions of use

  • The equation is commonly used for dilute or approximately ideal ionic solutions.

  • The diffusion coefficient should be appropriate for the ionic species and solution conditions.

  • The electrical potential gradient must be expressed consistently in space.

  • The signed ionic charge number must be used; cations and anions migrate in opposite directions.

  • The convection term is included when bulk fluid motion is relevant.

Limitations and assumptions

  • The simple form assumes an ideal or sufficiently dilute solution.

  • Concentrated electrolytes may require activity corrections and more advanced transport models.

  • The equation alone does not enforce electroneutrality or determine the electric potential field.

  • Ion-ion interactions and correlations can become important in concentrated systems.

  • Chemical reactions, ion pairing, and membrane selectivity may require additional governing equations.

Step-by-step worked examples

ProblemSolutionAnswer

A monovalent cation has D = 1.0 × 10⁻⁹ m²/s and concentration gradient ∇c = 1.0 × 10³ mol/m⁴. If the electrical potential gradient is zero and convection is absent, calculate its flux.

  • Given: D = 1.0 × 10⁻⁹ m²/s.

  • ∇c = 1.0 × 10³ mol/m⁴.

  • The electric migration and convection terms are zero.

  • Use: J = −D∇c.

  • J = −(1.0 × 10⁻⁹)(1.0 × 10³).

  • J = −1.0 × 10⁻⁶ mol/(m²·s).

The diffusive ionic flux is −1.0 × 10⁻⁶ mol/(m²·s), directed down the concentration gradient.

A positive monovalent ion has D = 1.0 × 10⁻⁹ m²/s, c = 100 mol/m³, and an electric potential gradient of 100 V/m. Assume uniform concentration and no convection at 298 K. Calculate the electrical migration flux.

  • Given: z = +1, D = 1.0 × 10⁻⁹ m²/s.

  • c = 100 mol/m³ and ∇φ = 100 V/m.

  • T = 298 K.

  • The diffusion and convection terms are zero.

  • Use: J = −(zDF/RT)c∇φ.

  • J = −[(1 × 1.0 × 10⁻⁹ × 96,485)/(8.314 × 298)] × 100 × 100.

  • J ≈ −3.90 × 10⁻⁵ mol/(m²·s).

The electrical migration flux is approximately −3.90 × 10⁻⁵ mol/(m²·s), opposite to the direction of increasing electric potential.

Real-world applications

  • Ion transport through membranes

  • Electrochemical cell modeling

  • Electrodialysis and desalination

  • Battery electrolyte transport

  • Biophysical membrane transport

  • Electrochemical sensor design

Formula Meaning

The Nernst–Planck equation describes the flux of an ionic species through a solution under the combined effects of diffusion, electrical migration, and bulk convection. It is widely used to model ion transport in electrochemical and biological systems.

Sources and further reading

No source has been supplied for this item yet. Treat the claim as needing editorial verification.

← Back to Formula Hub · Suggest a correction or source