✦ScienexySCIENCE KNOWLEDGE LIBRARY
General science · SCI-FORM-INT-2296

Kramers Reaction Rate Approximation

The overdamped Kramers approximation estimates the rate at which a thermally fluctuating system escapes from a metastable potential-energy well by crossing an energy barrier. It accounts for both the barrier height and the effects of viscous friction.

\(k \approx [\sqrt{U″(x_{a})|U″(x_{\mathrm{b}})|}/(2\pi\zeta)] \exp(-\Delta U/k_{\mathrm{B}} T)\)

What this formula means

The overdamped Kramers approximation estimates the rate at which a thermally fluctuating system escapes from a metastable potential-energy well by crossing an energy barrier. It accounts for both the barrier height and the effects of viscous friction.

Scientific principle

Principle

A particle trapped in a metastable potential well can escape through thermal fluctuations. The escape rate depends exponentially on the barrier height relative to thermal energy and also depends on the curvature of the potential near the stable minimum and barrier maximum.

Derivation

  • 1. Consider an overdamped particle moving in a one-dimensional potential U(x).

  • 2. Its motion is governed by ζẋ = −dU/dx + ξ(t), where ζ is the translational friction coefficient and ξ(t) is thermal noise.

  • 3. The stable well minimum is located at xₐ, while the barrier maximum is at x_b.

  • 4. Define the potential barrier as ΔU = U(x_b) − U(xₐ).

  • 5. In the high-barrier, overdamped approximation, escape depends on the local curvatures U″(xₐ) and U″(x_b).

  • 6. The approximate escape rate is k ≈ [√(U″(xₐ)|U″(x_b)|)/(2πζ)] exp(−ΔU/k_B T).

Final Result

k ≈ [√(U″(xₐ)|U″(x_b)|)/(2πζ)] exp(−ΔU/k_B T)

Interpretation

A larger energy barrier generally lowers the escape rate exponentially. Greater friction reduces the rate in the overdamped regime.

Variables and their meanings

SymbolMeaningUnit

k

Approximate escape or barrier-crossing rate

s⁻¹

U(x)

Potential energy as a function of position

J

xₐ

Position of the stable potential-well minimum

m

x_b

Position of the potential-barrier maximum

m

U″(xₐ)

Second derivative of potential energy at the stable minimum

J/m²

U″(x_b)

Second derivative of potential energy at the barrier maximum

J/m²

ΔU

Potential-energy barrier height U(x_b) − U(xₐ)

J

ζ

Translational friction coefficient in the overdamped Langevin equation

kg/s

k_B

Boltzmann constant

J/K

T

Absolute temperature

K

SI units and conversions

Escape Rate

s⁻¹

Potential Energy

J

Barrier Height

J

Friction Coefficient

kg/s

Temperature

K

Potential Curvature

J/m²

Conditions of use

  • The system should have a well-defined metastable potential minimum and an identifiable barrier maximum.

  • The barrier should be sufficiently high compared with thermal energy for the activated-escape approximation to apply.

  • The system should be in the overdamped regime.

  • The potential should be approximately parabolic near the minimum and barrier top.

  • The friction coefficient should be appropriately defined for the coordinate used in the model.

Limitations and assumptions

  • This expression is the overdamped, high-barrier Kramers approximation, not the general Kramers turnover formula.

  • It may not be appropriate for weak-friction systems where inertial effects are important.

  • Strongly anharmonic potential regions can reduce the accuracy of the local-curvature approximation.

  • Multiple escape pathways require contributions from the relevant barriers to be considered.

  • The rate can be modified by memory effects, non-Markovian friction, and nonthermal noise.

Step-by-step worked examples

ProblemSolutionAnswer

A system has barrier height ΔU = 10k_B T, potential curvatures U″(xₐ) = 4.0 × 10⁻¹⁸ J/m² and |U″(x_b)| = 1.0 × 10⁻¹⁸ J/m², and friction coefficient ζ = 1.0 × 10⁻¹² kg/s. Estimate the escape rate.

  • Given: ΔU/(k_B T) = 10.

  • U″(xₐ) = 4.0 × 10⁻¹⁸ J/m².

  • |U″(x_b)| = 1.0 × 10⁻¹⁸ J/m².

  • ζ = 1.0 × 10⁻¹² kg/s.

  • Use: k ≈ [√(U″(xₐ)|U″(x_b)|)/(2πζ)] exp(−ΔU/k_B T).

  • The curvature factor is √(4.0 × 10⁻³⁶) = 2.0 × 10⁻¹⁸ J/m².

  • The prefactor is approximately 3.183 × 10⁻⁷ s⁻¹.

  • exp(−10) ≈ 4.54 × 10⁻⁵.

  • k ≈ 1.44 × 10⁻¹¹ s⁻¹.

The approximate overdamped escape rate is 1.44 × 10⁻¹¹ s⁻¹.

A second system has ΔU = 8k_B T, U″(xₐ) = 9.0 × 10⁻¹⁸ J/m², |U″(x_b)| = 4.0 × 10⁻¹⁸ J/m², and ζ = 2.0 × 10⁻¹² kg/s. Estimate its escape rate.

  • Given: ΔU/(k_B T) = 8.

  • U″(xₐ) = 9.0 × 10⁻¹⁸ J/m².

  • |U″(x_b)| = 4.0 × 10⁻¹⁸ J/m².

  • ζ = 2.0 × 10⁻¹² kg/s.

  • Curvature factor = √(9.0 × 10⁻¹⁸ × 4.0 × 10⁻¹⁸).

  • Curvature factor = 6.0 × 10⁻¹⁸ J/m².

  • Prefactor = (6.0 × 10⁻¹⁸)/(2π × 2.0 × 10⁻¹²).

  • Prefactor ≈ 4.775 × 10⁻⁷ s⁻¹.

  • exp(−8) ≈ 3.3546 × 10⁻⁴.

  • k ≈ 1.60 × 10⁻¹⁰ s⁻¹.

The approximate overdamped escape rate is 1.60 × 10⁻¹⁰ s⁻¹.

Real-world applications

  • Chemical reaction barrier crossing

  • Conformational transitions in biomolecules

  • Molecular escape from metastable states

  • Diffusion over energy barriers

  • Nanoscale mechanical systems

  • Thermally activated switching phenomena

Formula Meaning

The overdamped Kramers approximation estimates the rate at which a thermally fluctuating system escapes from a metastable potential-energy well by crossing an energy barrier. It accounts for both the barrier height and the effects of viscous friction.

Sources and further reading

No source has been supplied for this item yet. Treat the claim as needing editorial verification.

← Back to Formula Hub · Suggest a correction or source