✦ScienexySCIENCE KNOWLEDGE LIBRARY
General science · SCI-FORM-KIN-002

Displacement Vector

Displacement is the change in the position of an object from its initial position to its final position. It is a vector quantity with both magnitude and direction.

\(\Delta r = r_{2} - r_{1}\)

What this formula means

Definition

Displacement is the change in the position of an object from its initial position to its final position. It is a vector quantity with both magnitude and direction.

Interpretation

The displacement vector points directly from the initial position to the final position, regardless of the actual path followed by the object.

Physical Significance

Displacement describes the net positional change of an object rather than the total distance it travels. It is fundamental to calculating average velocity.

Scientific principle

Principle

Position Vector Subtraction

Derivation

StepExplanationExpression

1

Represent the initial position of the object using a position vector.

r₁ = x₁i + y₁j + z₁k

2

Represent the final position using the same coordinate system.

r₂ = x₂i + y₂j + z₂k

3

Displacement is defined as the final position vector minus the initial position vector.

Δr = r₂ - r₁

4

Subtract corresponding coordinate components.

Δr = (x₂ - x₁)i + (y₂ - y₁)j + (z₂ - z₁)k

Result

Displacement is the vector difference between the final and initial positions. It is independent of the route followed between those positions.

Variables and their meanings

SymbolMeaningDescription

Δr

Displacement vector

The net change in the object's position.

r₂

Final position vector

The position vector representing the object's final location.

r₁

Initial position vector

The position vector representing the object's starting location.

x₁, y₁, z₁

Initial coordinates

The Cartesian coordinates of the initial position.

x₂, y₂, z₂

Final coordinates

The Cartesian coordinates of the final position.

i, j, k

Cartesian unit vectors

Unit vectors pointing along the positive x, y and z axes.

SI units and conversions

Si Unit

metre (m)

Dimensional Formula

[L]

Unit Explanation

Displacement has the dimension of length because it represents a change in spatial position.

Unit Conversions

ConversionApplication

1 km = 1000 m

Convert kilometre-based coordinates into metres.

1 cm = 0.01 m

Convert centimetre measurements into metres.

1 mm = 0.001 m

Convert millimetre measurements into metres.

Conditions of use

  • Initial and final positions must be measured relative to the same reference frame.

  • Both position vectors must use the same coordinate system.

  • Coordinate axes and positive directions must remain consistent.

  • The formula applies to one-dimensional, two-dimensional and three-dimensional motion.

  • Both positions must refer to the same object and the intended time interval.

Limitations and assumptions

  • Displacement does not describe the actual path travelled.

  • Displacement does not independently determine total distance travelled.

  • Its coordinate representation depends on the chosen reference frame.

  • Zero displacement does not necessarily mean that an object remained stationary; it may have returned to its initial position.

  • Displacement alone does not provide velocity or acceleration.

Step-by-step worked examples

ProblemGivenSolutionAnswer

An object moves from x₁ = 3 m to x₂ = 11 m along a straight line. Calculate its displacement.

  • x₁ = 3 m

  • x₂ = 11 m

StepExplanationCalculation

1

Write the one-dimensional displacement equation.

Δx = x₂ - x₁

2

Substitute the given positions.

Δx = 11 - 3

3

Evaluate the result.

Δx = +8 m

The displacement is 8 m in the positive x-direction.

A particle moves from position (2, 3) m to position (7, 9) m. Find its displacement vector and magnitude.

  • r₁ = 2i + 3j m

  • r₂ = 7i + 9j m

StepExplanationCalculation

1

Apply vector subtraction.

Δr = r₂ - r₁

2

Substitute the position vectors.

Δr = (7i + 9j) - (2i + 3j)

3

Subtract corresponding components.

Δr = 5i + 6j m

4

Calculate the magnitude.

|Δr| = √(5² + 6²) = √61 ≈ 7.81 m

The displacement vector is (5i + 6j) m, and its magnitude is approximately 7.81 m.

Real-world applications

ApplicationExplanation

Navigation

Navigation systems compare initial and final positions to determine net movement and direction.

Robotics

Robots use displacement calculations to determine the positional change required to move components or tools.

Aerospace Engineering

Aircraft and spacecraft navigation systems use displacement vectors to describe changes in location.

Motion Tracking

Computer vision systems compare object positions across successive observations to estimate displacement.

Experimental Physics

Displacement measurements are used to calculate average velocity and analyse motion.

Formula Meaning

Definition

Displacement is the change in the position of an object from its initial position to its final position. It is a vector quantity with both magnitude and direction.

Interpretation

The displacement vector points directly from the initial position to the final position, regardless of the actual path followed by the object.

Physical Significance

Displacement describes the net positional change of an object rather than the total distance it travels. It is fundamental to calculating average velocity.

Sources and further reading

No source has been supplied for this item yet. Treat the claim as needing editorial verification.

← Back to Formula Hub · Suggest a correction or source