✦ScienexySCIENCE KNOWLEDGE LIBRARY
General science · SCI-FORM-KIN-003

Distance Travelled (Path Length)

Distance travelled is the total length of the actual path covered by a moving object during a specified time interval. It is a scalar quantity and is always non-negative.

\(s = \int_{t_1}^{t_2} |v(t)| dt\)

What this formula means

Definition

Distance travelled is the total length of the actual path covered by a moving object during a specified time interval. It is a scalar quantity and is always non-negative.

Interpretation

Distance accumulates the magnitude of motion over time. Unlike displacement, it does not account for direction and does not decrease when an object reverses its direction.

Physical Significance

Distance describes the actual amount of travel and is essential for calculating average speed and analysing motion along curved or changing paths.

Alternative Representations

One Dimensional Continuous Motion

s = ∫ₜ₁ᵗ² |v(t)| dt

General Path

s = ∫ |d r|

Discrete Straight Segments

s = Σ |Δrᵢ|

Scientific principle

Principle

Integration of Speed and Accumulation of Path Length

Derivation

StepExplanationExpression

1

During a very small time interval dt, the object moves through a small displacement vector d r.

d r = v dt

2

The infinitesimal distance travelled is the magnitude of this displacement.

ds = |d r|

3

Substitute the velocity relation and use dt as a non-negative time increment.

ds = |v| dt

4

Add all infinitesimal path lengths over the time interval using integration.

s = ∫ₜ₁ᵗ² |v(t)| dt

5

For one-dimensional motion, the absolute value ensures that motion in either direction contributes positively to total distance.

s = ∫ₜ₁ᵗ² |dx/dt| dt

Result

Total distance is the time integral of speed. For a general trajectory, it is the integral of the magnitude of the differential displacement along the path.

Variables and their meanings

SymbolMeaningDescription

s

Distance travelled

The total length of the path covered during the specified interval.

v(t)

Velocity as a function of time

The instantaneous velocity of the object at time t.

|v(t)|

Speed

The non-negative magnitude of the instantaneous velocity.

t₁

Initial time

The beginning of the interval over which distance is calculated.

t₂

Final time

The end of the interval over which distance is calculated.

dt

Infinitesimal time interval

An extremely small positive increment of time.

d r

Differential displacement vector

The infinitesimal change in position along the trajectory.

SI units and conversions

Si Unit

metre (m)

Dimensional Formula

[L]

Unit Explanation

Speed has dimensions [LT⁻¹], and time has dimensions [T]. Their product has dimensions [L], which is the dimension of distance.

Unit Conversions

ConversionApplication

1 km = 1000 m

Convert kilometre measurements into metres.

1 m = 100 cm

Convert metres into centimetres when required.

1 hour = 3600 s

Convert time intervals into seconds when velocity is expressed in m/s.

1 km/h = 5/18 m/s

Convert speed from kilometres per hour into metres per second before SI calculations.

Conditions of use

  • The velocity function must be known or the motion must be measurable over the specified interval.

  • For the time-integral form, velocity must be sufficiently well-behaved and integrable over the interval.

  • The absolute value of velocity must be used for one-dimensional motion when direction can change.

  • For motion along a general curve, the magnitude of the differential displacement must be integrated along the actual path.

  • The time interval and units must be consistently defined.

Limitations and assumptions

  • Distance is a scalar and does not contain directional information.

  • Distance cannot be determined from initial and final positions alone when the actual path is unknown.

  • The integral requires a velocity function or equivalent motion data.

  • For discontinuous or piecewise motion, the integral may need to be evaluated separately over different intervals.

  • The formula does not directly determine the object's final position.

  • Distance is not generally equal to the magnitude of displacement; equality occurs for motion along a straight path without reversing direction.

Step-by-step worked examples

ProblemGivenSolutionAnswer

A particle moves along a straight line with velocity v(t) = 4t m/s from t = 0 s to t = 3 s. Calculate the total distance travelled.

  • v(t) = 4t m/s

  • t₁ = 0 s

  • t₂ = 3 s

StepExplanationCalculation

1

Write the distance integral.

s = ∫₀³ |v(t)| dt

2

Substitute the velocity function. Since 4t is non-negative over the interval, its absolute value is 4t.

s = ∫₀³ 4t dt

3

Integrate with respect to time.

s = [2t²]₀³

4

Evaluate the upper and lower limits.

s = 2(3²) - 2(0²) = 18 m

The total distance travelled is 18 m.

An object moves along a straight line with velocity v(t) = 6 - 2t m/s from t = 0 s to t = 5 s. Calculate the total distance travelled.

  • v(t) = 6 - 2t m/s

  • t₁ = 0 s

  • t₂ = 5 s

StepExplanationCalculation

1

Determine when the object changes direction by setting velocity equal to zero.

6 - 2t = 0, so t = 3 s

2

The velocity is positive from 0 to 3 seconds and negative from 3 to 5 seconds. Therefore, split the distance integral at t = 3 s.

s = ∫₀³ (6 - 2t) dt + ∫₃⁵ (2t - 6) dt

3

Evaluate the first interval.

s₁ = [6t - t²]₀³ = 18 - 9 = 9 m

4

Evaluate the second interval using the positive speed.

s₂ = [t² - 6t]₃⁵ = (-5) - (-9) = 4 m

5

Add the distances from both intervals.

s = 9 + 4 = 13 m

The total distance travelled is 13 m. The object reverses its direction at t = 3 s.

Real-world applications

ApplicationExplanation

Vehicle Odometers

Odometers measure accumulated travel distance rather than net displacement, including journeys involving turns and reversals.

Athletic Performance

Distance measurements are used to evaluate running, cycling and swimming performance over a training session.

Robotics

Robotic navigation systems estimate the total path length travelled by a mobile robot.

Transportation Planning

Distance calculations help estimate route lengths and travel requirements.

Motion Analysis

Experimental scientists use accumulated path length to calculate average speed and compare different trajectories.

Formula Meaning

Definition

Distance travelled is the total length of the actual path covered by a moving object during a specified time interval. It is a scalar quantity and is always non-negative.

Interpretation

Distance accumulates the magnitude of motion over time. Unlike displacement, it does not account for direction and does not decrease when an object reverses its direction.

Physical Significance

Distance describes the actual amount of travel and is essential for calculating average speed and analysing motion along curved or changing paths.

Alternative Representations

One Dimensional Continuous Motion

s = ∫ₜ₁ᵗ² |v(t)| dt

General Path

s = ∫ |d r|

Discrete Straight Segments

s = Σ |Δrᵢ|

Sources and further reading

No source has been supplied for this item yet. Treat the claim as needing editorial verification.

← Back to Formula Hub · Suggest a correction or source