✦ScienexySCIENCE KNOWLEDGE LIBRARY
General science · SCI-FORM-KIN-012

Second Equation of Motion

The second equation of motion relates displacement to initial velocity, constant acceleration and elapsed time.

\(s = ut + \frac{1}{2}at^{2}\)

What this formula means

Definition

The second equation of motion relates displacement to initial velocity, constant acceleration and elapsed time.

Interpretation

The displacement consists of two contributions: the displacement that would occur from the initial velocity alone and the additional displacement caused by constant acceleration.

Physical Significance

It determines the displacement of an object over a specified time interval when its initial velocity and constant acceleration are known.

Alternative Forms

Displacement

s = ut + ½at²

Initial Velocity

u = (s - ½at²)/t

Acceleration

a = 2(s - ut)/t²

Time

t = [-u ± √(u² + 2as)]/a, for a ≠ 0

Scientific principle

Principle

Integration of Velocity Under Constant Acceleration

Derivation

StepExplanationExpression

1

Start with the first equation of motion.

v = u + at

2

Velocity is the rate of change of displacement.

v = ds/dt

3

Substitute the velocity expression into the displacement derivative.

ds/dt = u + at

4

Rearrange and integrate with respect to time from zero to t.

∫₀ˢ ds = ∫₀ᵗ (u + aτ)dτ

5

Integrate each term, treating u and a as constants.

s = [uτ + ½aτ²]₀ᵗ

6

Apply the integration limits.

s = ut + ½at²

Result

The second equation of motion is obtained by integrating the velocity function over time, assuming constant acceleration and zero initial displacement at the chosen starting instant.

Variables and their meanings

SymbolMeaningDescription

s

Displacement

The signed change in position during the time interval.

u

Initial velocity

The velocity at the beginning of the interval.

a

Constant acceleration

The constant rate of change of velocity.

t

Elapsed time

The time measured from the initial instant.

½

One-half

The numerical coefficient resulting from integrating the term at.

SI units and conversions

Si Unit

Displacement

metre (m)

Initial Velocity

metre per second (m/s)

Acceleration

metre per second squared (m/s²)

Time

second (s)

Dimensional Formula

Every term has dimension [L].

Unit Explanation

The term ut has dimension [LT⁻¹][T] = [L], while at² has dimension [LT⁻²][T²] = [L]. Both terms therefore represent displacement.

Unit Conversions

ConversionApplication

1 km = 1000 m

Convert kilometre-based displacement into metres.

1 km/h = 5/18 m/s

Convert initial velocity into SI units.

1 minute = 60 s

Convert elapsed time into seconds.

Conditions of use

  • Acceleration must be constant throughout the interval.

  • The initial displacement is taken as zero, so s represents displacement from the starting position.

  • Initial velocity and acceleration must use a consistent positive direction.

  • Time must be measured from the initial instant.

  • All quantities must use compatible units.

Limitations and assumptions

  • The equation is not generally valid for variable acceleration.

  • It calculates displacement, not necessarily total distance travelled.

  • If an object reverses direction, displacement and total distance may differ.

  • The scalar equation applies directly to one-dimensional motion; vector motion requires a vector form.

  • The equation assumes a classical description of motion.

Step-by-step worked examples

ProblemGivenSolutionAnswer

A cyclist starts with a velocity of 4 m/s and accelerates uniformly at 2 m/s² for 6 seconds. Find the displacement.

  • u = 4 m/s

  • a = 2 m/s²

  • t = 6 s

StepExplanationCalculation

1

Write the second equation of motion.

s = ut + ½at²

2

Substitute the given values.

s = (4 × 6) + ½(2 × 6²)

3

Evaluate the two contributions.

s = 24 + 36

The displacement is 60 m.

A ball is thrown vertically upward with an initial velocity of 20 m/s. Taking upward as positive and gravitational acceleration as -10 m/s², calculate its displacement after 2 seconds.

  • u = 20 m/s

  • a = -10 m/s²

  • t = 2 s

StepExplanationCalculation

1

Apply the second equation of motion.

s = ut + ½at²

2

Substitute the values.

s = (20 × 2) + ½(-10 × 2²)

3

Calculate the displacement.

s = 40 - 20 = 20 m

The ball's displacement after 2 seconds is 20 m upward.

Real-world applications

ApplicationExplanation

Vehicle Motion

The equation estimates how far a vehicle travels during a period of approximately constant acceleration.

Vertical Motion

It calculates the displacement of objects moving vertically under approximately constant gravitational acceleration.

Industrial Transport

Engineers use it to estimate the displacement of conveyor systems and moving machinery during controlled acceleration.

Sports Physics

It helps analyse the displacement of athletes or equipment during intervals of approximately uniform acceleration.

Motion Experiments

It is used to compare measured displacement with theoretical predictions in constant-acceleration experiments.

Formula Meaning

Definition

The second equation of motion relates displacement to initial velocity, constant acceleration and elapsed time.

Interpretation

The displacement consists of two contributions: the displacement that would occur from the initial velocity alone and the additional displacement caused by constant acceleration.

Physical Significance

It determines the displacement of an object over a specified time interval when its initial velocity and constant acceleration are known.

Alternative Forms

Displacement

s = ut + ½at²

Initial Velocity

u = (s - ½at²)/t

Acceleration

a = 2(s - ut)/t²

Time

t = [-u ± √(u² + 2as)]/a, for a ≠ 0

Sources and further reading

No source has been supplied for this item yet. Treat the claim as needing editorial verification.

← Back to Formula Hub · Suggest a correction or source