✦ScienexySCIENCE KNOWLEDGE LIBRARY
General science · SCI-FORM-KIN-018

Slope of Position–Time Graph

The average velocity over a time interval is equal to the change in position divided by the elapsed time.

\(v_{\mathrm{avg}} = \Delta x / \Delta t\)

What this formula means

Definition

The average velocity over a time interval is equal to the change in position divided by the elapsed time.

Interpretation

The slope of a position–time graph between two points represents average velocity. A steeper slope indicates a greater magnitude of average velocity.

Physical Significance

This relationship connects the geometrical slope of a position–time graph with the rate of change of position.

Scientific principle

Principle

Average Rate of Change of Position

Derivation

StepExplanationExpression

1

Consider an object whose position changes from x₁ at time t₁ to x₂ at time t₂.

Δx = x₂ − x₁; Δt = t₂ − t₁

2

Average velocity is defined as displacement divided by the elapsed time.

v_avg = Δx / Δt

3

The slope of a graph is the vertical change divided by the horizontal change. On a position–time graph, these changes are displacement and elapsed time.

Slope = (x₂ − x₁) / (t₂ − t₁)

4

Therefore, the slope of a position–time graph between two points equals the average velocity.

Slope = v_avg = Δx / Δt

Result

The slope of a position–time graph over a finite interval gives average velocity. The slope at a single instant, obtained using a tangent, gives instantaneous velocity.

Variables and their meanings

SymbolMeaningDescription

v_avg

Average velocity

The net displacement divided by the elapsed time.

Δx

Change in position

The final position minus the initial position.

Δt

Elapsed time

The final time minus the initial time.

x₁, x₂

Initial and final positions

The object's positions at the beginning and end of the interval.

t₁, t₂

Initial and final times

The times corresponding to the two position measurements.

SI units and conversions

Si Unit

metre per second (m/s)

Dimensional Formula

[LT⁻¹]

Unit Explanation

Position is measured in metres and time in seconds. Dividing displacement by elapsed time produces metres per second.

Unit Conversions

ConversionApplication

1 km/h = 1/3.6 m/s

Convert average velocity from kilometres per hour into metres per second.

1 m/s = 3.6 km/h

Convert metres per second into kilometres per hour.

Conditions of use

  • The graph must represent position against time.

  • The two points must correspond to the same object and reference frame.

  • The time interval must be non-zero.

  • The position and time axes must have clearly defined scales and units.

  • For average velocity, use the straight-line slope between the two selected points.

  • For instantaneous velocity, use the slope of the tangent at the required time.

Limitations and assumptions

  • The finite-interval slope gives average velocity, not necessarily the velocity at every instant within that interval.

  • The slope gives signed velocity in one-dimensional motion; its sign indicates direction along the chosen axis.

  • A position–time graph with a curved line has a changing slope, indicating changing instantaneous velocity.

  • Measurement uncertainty in graph coordinates affects the calculated slope.

  • The formula does not directly give speed unless the direction and magnitude are interpreted appropriately.

Step-by-step worked examples

ProblemGivenSolutionAnswer

An object's position changes from 4 m to 16 m between 2 s and 6 s. Determine the slope of its position–time graph over this interval.

  • x₁ = 4 m

  • x₂ = 16 m

  • t₁ = 2 s

  • t₂ = 6 s

StepExplanationCalculation

1

Calculate the change in position.

Δx = 16 − 4 = 12 m

2

Calculate the elapsed time.

Δt = 6 − 2 = 4 s

3

Calculate the slope.

Slope = Δx / Δt = 12 / 4 = 3 m/s

The slope is 3 m/s, so the average velocity is 3 m/s in the positive direction.

A position–time graph passes through the points (1 s, 10 m) and (5 s, 2 m). Find its average slope.

  • x₁ = 10 m

  • x₂ = 2 m

  • t₁ = 1 s

  • t₂ = 5 s

StepExplanationCalculation

1

Find the displacement.

Δx = 2 − 10 = −8 m

2

Find the elapsed time.

Δt = 5 − 1 = 4 s

3

Divide displacement by elapsed time.

Slope = −8 / 4 = −2 m/s

The average slope is −2 m/s, indicating motion in the negative direction.

Real-world applications

ApplicationExplanation

Motion Analysis

Position–time graphs are used to determine the average velocity of moving objects during selected intervals.

Vehicle Tracking

Recorded position data can be plotted against time to estimate a vehicle's average velocity.

Laboratory Experiments

Students and researchers use graph slopes to determine velocity from measured position and time data.

Robotics

Position records from moving robotic components can be analysed to estimate their average velocities.

Topics

  • kinematics

  • position-time-graph

  • slope

  • average-velocity

  • graphical-analysis

Formula Meaning

Definition

The average velocity over a time interval is equal to the change in position divided by the elapsed time.

Interpretation

The slope of a position–time graph between two points represents average velocity. A steeper slope indicates a greater magnitude of average velocity.

Physical Significance

This relationship connects the geometrical slope of a position–time graph with the rate of change of position.

Sources and further reading

No source has been supplied for this item yet. Treat the claim as needing editorial verification.

← Back to Formula Hub · Suggest a correction or source