✦ScienexySCIENCE KNOWLEDGE LIBRARY
General science · SCI-FORM-KIN-021

Change in Velocity from Acceleration–Time Graph

The change in velocity over a time interval is equal to the signed area under the acceleration–time graph.

\(\Delta v = \int_{t_1}^{t_2} a(t) dt\)

What this formula means

Definition

The change in velocity over a time interval is equal to the signed area under the acceleration–time graph.

Interpretation

Areas above the time axis represent positive changes in velocity, while areas below the axis represent negative changes in velocity.

Physical Significance

This relationship allows velocity change to be determined by accumulating acceleration over time, even when acceleration is not constant.

Scientific principle

Principle

Acceleration as the Time Derivative of Velocity and Integration

Derivation

StepExplanationExpression

1

Instantaneous acceleration is the rate of change of velocity with respect to time.

a(t) = dv/dt

2

Rearrange the differential relationship.

dv = a(t) dt

3

Integrate between the initial and final velocities and times.

∫ᵥ₁ᵥ² dv = ∫ₜ₁ᵗ² a(t) dt

4

The integral of the velocity differential gives the change in velocity.

Δv = v₂ − v₁ = ∫ₜ₁ᵗ² a(t) dt

5

The definite integral represents the signed area under the acceleration–time graph.

Change in velocity = Signed area under the a–t graph

Result

The definite integral of acceleration over time gives the change in velocity. For constant acceleration, the relationship reduces to Δv = aΔt.

Variables and their meanings

SymbolMeaningDescription

Δv

Change in velocity

Final velocity minus initial velocity.

a(t)

Acceleration as a function of time

The instantaneous signed acceleration at time t.

t₁

Initial time

The beginning of the integration interval.

t₂

Final time

The end of the integration interval.

v₁, v₂

Initial and final velocities

The velocities at the beginning and end of the selected interval.

dt

Infinitesimal time interval

A very small element of time used in integration.

SI units and conversions

Si Unit

metre per second (m/s)

Dimensional Formula

[LT⁻¹]

Unit Explanation

Acceleration has units m/s² and time has units s. Their product has units (m/s²) × s = m/s, the unit of velocity change.

Unit Conversions

ConversionApplication

1 km/h = 5/18 m/s

Convert velocity changes from kilometres per hour into metres per second.

1 min = 60 s

Convert time intervals into seconds when acceleration is expressed in m/s².

1 m/s² = 100 cm/s²

Convert acceleration into centimetres per second squared when using centimetre-based measurements.

Conditions of use

  • The acceleration function or acceleration–time graph must be known over the interval.

  • Acceleration must be treated as a signed quantity.

  • The time interval must be clearly defined.

  • For graph-based calculations, the signed area must be determined.

  • For analytical integration, the acceleration function must be integrable over the interval.

Limitations and assumptions

  • The integral gives the change in velocity, not the final velocity by itself.

  • The final velocity requires the initial velocity: v₂ = v₁ + Δv.

  • Positive and negative areas can cancel when acceleration changes sign.

  • Graph-reading errors can affect the estimated change in velocity.

  • The one-dimensional expression uses signed acceleration; vector motion requires vector integration.

Step-by-step worked examples

ProblemGivenSolutionAnswer

An object experiences a constant acceleration of 3 m/s² for 4 s. Find its change in velocity using the acceleration–time graph.

  • a = 3 m/s²

  • Δt = 4 s

StepExplanationCalculation

1

Use the integral relationship.

Δv = ∫₀⁴ 3 dt

2

Integrate the constant acceleration.

Δv = 3[t]₀⁴

3

Evaluate the limits.

Δv = 3(4 − 0) = 12 m/s

The velocity increases by 12 m/s.

An object's acceleration decreases uniformly from 8 m/s² to 2 m/s² over 3 s. Determine its change in velocity.

  • Initial acceleration = 8 m/s²

  • Final acceleration = 2 m/s²

  • Time interval = 3 s

StepExplanationCalculation

1

The acceleration–time graph forms a trapezium above the time axis.

Area = ½ × (sum of parallel sides) × height

2

Substitute the two acceleration values and the time interval.

Δv = ½ × (8 + 2) × 3

3

Calculate the signed area.

Δv = ½ × 10 × 3 = 15 m/s

The velocity increases by 15 m/s.

Real-world applications

ApplicationExplanation

Vehicle Acceleration Analysis

Acceleration records can be integrated to determine how much a vehicle's velocity changes during acceleration or braking.

Motion Sensors

Accelerometer data can be integrated over time to estimate velocity changes, although measurement errors can accumulate.

Sports Performance

Athlete acceleration measurements can be used to analyse changes in running velocity.

Robotics and Automation

Acceleration profiles help robotic systems estimate velocity changes during controlled movement.

Topics

  • kinematics

  • acceleration-time-graph

  • change-in-velocity

  • definite-integral

  • signed-area

Formula Meaning

Definition

The change in velocity over a time interval is equal to the signed area under the acceleration–time graph.

Interpretation

Areas above the time axis represent positive changes in velocity, while areas below the axis represent negative changes in velocity.

Physical Significance

This relationship allows velocity change to be determined by accumulating acceleration over time, even when acceleration is not constant.

Sources and further reading

No source has been supplied for this item yet. Treat the claim as needing editorial verification.

← Back to Formula Hub · Suggest a correction or source