✦ScienexySCIENCE KNOWLEDGE LIBRARY
General science · SCI-FORM-KIN-029

Vertical Position of Projectile

The vertical position of a projectile is its initial height plus the displacement caused by its initial vertical velocity and gravitational acceleration.

\(y = y_{0} + (v_{0} \sin \theta)t - \frac{1}{2}gt^{2}\)

What this formula means

Definition

The vertical position of a projectile is its initial height plus the displacement caused by its initial vertical velocity and gravitational acceleration.

Interpretation

The initial vertical velocity contributes upward or downward displacement, while gravity produces a downward displacement that increases with the square of time.

Physical Significance

This equation determines the projectile's height above a chosen horizontal reference level at any time during its flight.

Scientific principle

Principle

Constant-Acceleration Motion in the Vertical Direction

Derivation

StepExplanationExpression

1

Resolve the initial velocity into its vertical component.

vᵧ₀ = v₀ sin θ

2

Choose upward as positive. The vertical acceleration is gravitational acceleration downward.

aᵧ = −g

3

Apply the constant-acceleration displacement equation.

y − y₀ = vᵧ₀t + ½aᵧt²

4

Substitute the vertical initial velocity and acceleration.

y − y₀ = (v₀ sin θ)t − ½gt²

5

Add the initial vertical position to obtain the final position.

y = y₀ + (v₀ sin θ)t − ½gt²

Result

The vertical position at time t is y = y₀ + (v₀ sin θ)t − ½gt².

Variables and their meanings

SymbolMeaningDescription

y

Vertical position

The projectile's vertical coordinate at time t.

y₀

Initial vertical position

The height from which the projectile is launched.

v₀

Initial speed

The magnitude of the initial velocity.

θ

Launch angle

The angle between the initial velocity and the horizontal.

t

Elapsed time

The time measured from launch.

g

Gravitational acceleration

The magnitude of gravitational acceleration, approximately 9.81 m/s² near Earth's surface.

SI units and conversions

Si Unit

metre (m)

Dimensional Formula

[L]

Unit Explanation

The terms y₀, v₀t, and gt² all have dimensions of length, so they can be added or subtracted.

Unit Conversions

ConversionApplication

1 km = 1000 m

Convert height and vertical position into metres.

1 km/h = 5/18 m/s

Convert initial speed into metres per second.

1 min = 60 s

Convert time into seconds when using g in m/s².

Conditions of use

  • The projectile moves under the influence of gravity alone.

  • Air resistance is neglected.

  • Gravitational acceleration is constant.

  • Upward is chosen as the positive vertical direction.

  • The launch angle is measured from the horizontal.

  • The initial height and elapsed time are known.

Limitations and assumptions

  • The formula assumes a constant gravitational field.

  • Air resistance, wind, and other vertical forces are neglected.

  • The negative gravitational term depends on choosing upward as positive.

  • The equation describes vertical position only, not horizontal position.

  • For a projectile launched downward, the launch angle and vertical velocity component must be assigned the correct sign.

Step-by-step worked examples

ProblemGivenSolutionAnswer

A projectile is launched from a height of 10 m with an initial speed of 20 m/s at 30° above the horizontal. Find its vertical position after 2 s. Take g = 9.8 m/s².

  • y₀ = 10 m

  • v₀ = 20 m/s

  • θ = 30°

  • t = 2 s

  • g = 9.8 m/s²

StepExplanationCalculation

1

Use the vertical position equation.

y = y₀ + (v₀ sin θ)t − ½gt²

2

Substitute the known values.

y = 10 + (20 sin 30°)(2) − ½(9.8)(2²)

3

Evaluate the trigonometric value and powers.

y = 10 + (10)(2) − 4.9(4)

4

Calculate the vertical position.

y = 10 + 20 − 19.6 = 10.4 m

The projectile's vertical position after 2 s is 10.4 m above the reference level.

Real-world applications

ApplicationExplanation

Sports

The equation predicts the height of a ball during a throw, kick, or jump under idealised conditions.

Engineering

Engineers use vertical position equations to model the height of launched objects.

Physics Laboratory

Experimental projectile heights can be compared with theoretical predictions to investigate gravitational motion.

Topics

  • kinematics

  • projectile-motion

  • vertical-position

  • gravitational-motion

  • height

Formula Meaning

Definition

The vertical position of a projectile is its initial height plus the displacement caused by its initial vertical velocity and gravitational acceleration.

Interpretation

The initial vertical velocity contributes upward or downward displacement, while gravity produces a downward displacement that increases with the square of time.

Physical Significance

This equation determines the projectile's height above a chosen horizontal reference level at any time during its flight.

Sources and further reading

No source has been supplied for this item yet. Treat the claim as needing editorial verification.

← Back to Formula Hub · Suggest a correction or source