✦ScienexySCIENCE KNOWLEDGE LIBRARY
General science · SCI-FORM-KIN-030

Projectile Trajectory Equation

The projectile trajectory equation expresses vertical position directly as a function of horizontal position, eliminating time from the horizontal and vertical equations of motion.

\(y = y_{0} + (x - x_{0})\tan \theta - [g(x - x_{0})^{2}]/[2v_{0}^{2} \cos^{2} \theta]\)

What this formula means

Definition

The projectile trajectory equation expresses vertical position directly as a function of horizontal position, eliminating time from the horizontal and vertical equations of motion.

Interpretation

For ideal projectile motion under constant gravitational acceleration, the trajectory is a parabola.

Physical Significance

This equation describes the geometric path of a projectile and allows its height to be calculated at any horizontal position.

Scientific principle

Principle

Elimination of Time from Independent Horizontal and Vertical Motion

Derivation

StepExplanationExpression

1

Write the horizontal position equation.

x − x₀ = (v₀ cos θ)t

2

Solve for time.

t = (x − x₀)/(v₀ cos θ)

3

Write the vertical position equation.

y − y₀ = (v₀ sin θ)t − ½gt²

4

Substitute the expression for time into the vertical equation.

y − y₀ = (v₀ sin θ)[(x − x₀)/(v₀ cos θ)] − ½g[(x − x₀)/(v₀ cos θ)]²

5

Simplify the first term using sin θ/cos θ = tan θ.

y − y₀ = (x − x₀)tan θ − g(x − x₀)²/(2v₀² cos² θ)

6

Add the initial height to obtain the complete trajectory equation.

y = y₀ + (x − x₀)tan θ − g(x − x₀)²/(2v₀² cos² θ)

Result

The trajectory is quadratic in horizontal displacement, so an ideal projectile follows a parabolic path. If launched from the origin, set x₀ = 0 and y₀ = 0.

Variables and their meanings

SymbolMeaningDescription

x

Horizontal position

The horizontal coordinate of the projectile.

y

Vertical position

The vertical coordinate of the projectile.

x₀

Initial horizontal position

The horizontal coordinate at launch.

y₀

Initial vertical position

The vertical coordinate at launch.

v₀

Initial speed

The magnitude of the projectile's initial velocity.

θ

Launch angle

The angle between the initial velocity and the horizontal.

g

Gravitational acceleration

The magnitude of gravitational acceleration, approximately 9.81 m/s² near Earth's surface.

SI units and conversions

Si Unit

metre (m) for x and y

Dimensional Formula

[L]

Unit Explanation

The tangent and cosine functions are dimensionless. The term g(x − x₀)²/v₀² has dimensions (m/s² × m²)/(m²/s²) = m, so every position term has units of length.

Unit Conversions

ConversionApplication

1 km = 1000 m

Convert horizontal and vertical positions into metres.

1 km/h = 5/18 m/s

Convert initial speed into metres per second.

Degrees to radians: θ(rad) = θ(°) × π/180

Use radians when evaluating trigonometric functions in calculus-based calculations.

Conditions of use

  • The projectile is launched with a known initial speed and angle.

  • Gravity is constant and acts vertically downward.

  • Air resistance is neglected.

  • Horizontal acceleration is zero.

  • The launch angle is measured from the horizontal.

  • The horizontal and vertical coordinates use the same reference frame.

Limitations and assumptions

  • The parabolic trajectory is an idealisation that neglects air resistance.

  • The formula assumes constant gravitational acceleration.

  • It does not account for wind, lift, spin, or other aerodynamic forces.

  • The formula requires cos θ ≠ 0 because it eliminates time using horizontal motion.

  • For a vertical launch, horizontal motion is absent and the vertical position equation should be used instead.

  • Real projectiles may not follow a perfect parabola because of aerodynamic effects.

Step-by-step worked examples

ProblemGivenSolutionAnswer

A projectile is launched from the origin at 20 m/s at 45° above the horizontal. Find its height when it has travelled 20 m horizontally. Take g = 9.8 m/s².

  • x₀ = 0 m

  • y₀ = 0 m

  • v₀ = 20 m/s

  • θ = 45°

  • x = 20 m

  • g = 9.8 m/s²

StepExplanationCalculation

1

Use the trajectory equation for a launch from the origin.

y = x tan θ − gx²/(2v₀² cos² θ)

2

Substitute the known values.

y = 20 tan 45° − [9.8(20²)]/[2(20²)(cos² 45°)]

3

Use tan 45° = 1 and cos² 45° = 0.5.

y = 20 − 3920/400

4

Evaluate the expression.

y = 20 − 9.8 = 10.2 m

The projectile is 10.2 m above the launch level when it has travelled 20 m horizontally.

Real-world applications

ApplicationExplanation

Sports Trajectory Prediction

The trajectory equation helps estimate the path of balls thrown, kicked, or hit through the air.

Engineering Design

Engineers use projectile trajectories to estimate the positions and paths of objects launched under gravity.

Computer Simulation

Physics simulations use the parabolic trajectory model to represent ideal projectile motion.

Experimental Physics

Measured projectile paths can be compared with the theoretical parabola to study deviations caused by air resistance.

Topics

  • kinematics

  • projectile-motion

  • trajectory-equation

  • parabolic-motion

  • elimination-of-time

Formula Meaning

Definition

The projectile trajectory equation expresses vertical position directly as a function of horizontal position, eliminating time from the horizontal and vertical equations of motion.

Interpretation

For ideal projectile motion under constant gravitational acceleration, the trajectory is a parabola.

Physical Significance

This equation describes the geometric path of a projectile and allows its height to be calculated at any horizontal position.

Sources and further reading

No source has been supplied for this item yet. Treat the claim as needing editorial verification.

← Back to Formula Hub · Suggest a correction or source