The time of closest approach is the time at which two objects moving with constant relative velocity reach their minimum separation. The formula calculates when the relative position vector is perpendicular to the relative velocity vector, provided that this time lies in the future interval being considered.
Time of Closest Approach
The time of closest approach is the time at which two objects moving with constant relative velocity reach their minimum separation. The formula calculates when the relative position vector is perpendicular to the relative velocity vector, provided that this time lies in the future interval being considered.
\(t_{(}c_{)} = -(\vec{r}_{0} \cdot \vec{v}_{r}) / |\vec{v}_{r}|^{2}\)
\(\vec{r}_{r}(t) = \vec{r}_{0} + \vec{v}_{r}t\)
What this formula means
Scientific principle
Principle
For constant relative velocity, the relative position changes linearly with time. The squared separation is minimum when its time derivative becomes zero.
Derivation
Let r⃗₀ be the initial relative position of A with respect to B at t = 0.
Let v⃗ᵣ = v⃗ₐ − v⃗ᵦ be their constant relative velocity.
The relative position at time t is r⃗ᵣ(t) = r⃗₀ + v⃗ᵣt.
The squared separation is D²(t) = r⃗ᵣ(t) · r⃗ᵣ(t).
Substitute the relative-position expression: D²(t) = (r⃗₀ + v⃗ᵣt) · (r⃗₀ + v⃗ᵣt).
Expand: D²(t) = r⃗₀ · r⃗₀ + 2t(r⃗₀ · v⃗ᵣ) + t²|v⃗ᵣ|².
Differentiate with respect to time: d(D²)/dt = 2(r⃗₀ · v⃗ᵣ) + 2t|v⃗ᵣ|².
At the minimum separation, set the derivative equal to zero: 2(r⃗₀ · v⃗ᵣ) + 2t|v⃗ᵣ|² = 0.
Solving for t gives t₍c₎ = −(r⃗₀ · v⃗ᵣ)/|v⃗ᵣ|².
For nonzero relative velocity, the second derivative of D² is 2|v⃗ᵣ|², which is positive. Therefore, this stationary point is a minimum.
Result
The closest-approach time is determined by the negative projection of the initial relative position onto the relative velocity, divided by the square of the relative speed.
Variables and their meanings
T₍c₎
Time of closest approach measured from the initial instant.
R⃗₀
Initial relative position vector of A with respect to B.
V⃗ᵣ
Constant relative velocity vector, equal to v⃗ₐ − v⃗ᵦ.
R⃗ᵣ(t)
Relative position vector at time t.
D(t)
Separation between the two objects at time t.
·
Dot product of two vectors.
|v⃗ᵣ|
Magnitude of the relative velocity.
SI units and conversions
SIUnit
second (s)
Dimensions
[T]
Notes
The numerator has units of m²/s and the denominator has units of m²/s², so their ratio has units of seconds.
Use metres for position and m/s for velocity to obtain time directly in seconds.
If a different consistent unit system is used, the resulting time will be expressed in its corresponding time unit.
Conditions of use
The objects must be modelled as moving with constant velocities over the time interval considered.
Their initial relative position and relative velocity must be measured in the same inertial reference frame.
The relative velocity must be nonzero; otherwise, the denominator is zero.
The calculated time must be checked against the time interval of interest. A negative value represents a closest approach in the past relative to the chosen initial instant.
For a future prediction, use t ≥ 0 and consider the endpoint t = 0 if the unconstrained result is negative.
Limitations and assumptions
The formula assumes constant relative velocity, so it does not directly apply when either object accelerates.
It describes the minimum separation between idealized point objects; the physical sizes and shapes of extended objects must be considered separately.
If the calculated time is outside a restricted observation interval, the closest point within that interval may occur at one of its endpoints.
If relative velocity is zero, the separation remains constant under this model, so there is no unique closest-approach time.
The formula predicts the time of minimum separation but does not by itself determine whether a collision occurs.
Step-by-step worked examples
| Problem | Solution | Answer |
|---|---|---|
At t = 0, object A is at (100, 40) m and object B is at (20, 10) m. Their velocities are v⃗ₐ = (−5, 0) m/s and v⃗ᵦ = (−1, 2) m/s. Find the time of closest approach. |
| The objects reach their closest approach 19 seconds after the initial instant. |
Real-world applications
Air-traffic monitoring uses closest-approach calculations to estimate the time of minimum aircraft separation.
Spacecraft navigation uses relative motion to predict the nearest separation between spacecraft.
Radar tracking systems estimate when moving targets will be nearest to a reference vehicle.
Robotics uses closest-approach predictions to assess whether moving objects may enter a restricted area.
Maritime navigation uses relative-motion analysis to estimate the time when two vessels will be closest.
Topics
kinematics
closest approach
relative motion
relative velocity
vector analysis
Formula Meaning
The time of closest approach is the time at which two objects moving with constant relative velocity reach their minimum separation. The formula calculates when the relative position vector is perpendicular to the relative velocity vector, provided that this time lies in the future interval being considered.
Sources and further reading
No source has been supplied for this item yet. Treat the claim as needing editorial verification.