Angular displacement is the change in angular position of a rotating object. It measures how much the object rotates from its initial angular position to its final angular position. It is a signed quantity: counterclockwise rotation is commonly positive and clockwise rotation negative.
Angular Displacement
Angular displacement is the change in angular position of a rotating object. It measures how much the object rotates from its initial angular position to its final angular position. It is a signed quantity: counterclockwise rotation is commonly positive and clockwise rotation negative.
\(\Delta_{\theta} = \theta_{2} - \theta_{1}\)
\(\Delta_{\theta} = s/r\)
What this formula means
Scientific principle
Principle
Angular position describes the orientation of an object relative to a chosen reference direction. The change in this position is angular displacement. For circular motion, angular displacement in radians is also equal to the arc length divided by the radius.
Derivation
Let θ₁ represent the initial angular position and θ₂ the final angular position.
The change in angular position is the final angle minus the initial angle: Δθ = θ₂ − θ₁.
For motion along a circular arc, the radian definition gives θ = s/r, where s is arc length and r is radius.
Therefore, the angular displacement corresponding to an arc length s is Δθ = s/r.
One complete counterclockwise revolution corresponds to 2π radians, while one complete clockwise revolution corresponds to −2π radians under the usual sign convention.
Result
Angular displacement is the signed change in angular position, measured in radians. For circular motion, it equals the directed arc length divided by the radius.
Variables and their meanings
Δθ
Angular displacement.
Θ₁
Initial angular position.
Θ₂
Final angular position.
S
Directed arc length travelled along the circular path.
R
Radius of the circular path.
SI units and conversions
SIUnit
radian (rad)
Dimensions
Dimensionless
Notes
A radian is dimensionless because it is a ratio of two lengths.
One complete revolution equals 2π rad or 360°.
To convert degrees into radians, multiply by π/180.
To convert radians into degrees, multiply by 180/π.
Angular displacement should retain its sign to indicate rotational direction.
Conditions of use
The initial and final angular positions must be measured using the same reference direction.
The arc-length relation Δθ = s/r applies to circular motion with a defined radius.
The arc length must be measured along the circular path, not as the straight-line distance between endpoints.
A consistent sign convention must be used for clockwise and counterclockwise rotation.
Limitations and assumptions
Angular displacement describes the net change in angular position, not the total angle travelled during multiple reversals.
For multiple complete revolutions, the angular position may be represented using an unwrapped angle rather than only an angle between 0 and 2π.
The relation s = rΔθ requires Δθ to be expressed in radians.
For an extended rigid body rotating about an axis, all points at a given perpendicular distance from the axis share the same angular displacement, but their arc lengths differ.
Step-by-step worked examples
| Problem | Solution | Answer |
|---|---|---|
A wheel rotates from an initial angular position of 30° to a final angular position of 150° counterclockwise. Calculate its angular displacement in degrees and radians. |
| The angular displacement is +120° or +2π/3 rad. |
A point on a rotating disk travels through an arc length of 1.5 m at a radius of 0.5 m. Find its angular displacement. |
| The angular displacement is 3 rad in the direction of travel. |
Real-world applications
Measuring the rotation of wheels, gears, and rotating machinery.
Describing the angular movement of robotic joints.
Calculating the rotation of Earth and other celestial bodies.
Measuring the movement of clock hands.
Analysing the angular motion of turbines, motors, and flywheels.
Topics
kinematics
angular displacement
rotational motion
radian
circular motion
Formula Meaning
Angular displacement is the change in angular position of a rotating object. It measures how much the object rotates from its initial angular position to its final angular position. It is a signed quantity: counterclockwise rotation is commonly positive and clockwise rotation negative.
Sources and further reading
No source has been supplied for this item yet. Treat the claim as needing editorial verification.