✦ScienexySCIENCE KNOWLEDGE LIBRARY
General science · SCI-FORM-KIN-045

Angular Velocity Under Constant Angular Acceleration

When angular acceleration is constant, angular velocity changes linearly with time. The final angular velocity equals the initial angular velocity plus the product of angular acceleration and elapsed time.

  • \(\omega = \omega_{0} + \alpha t\)

  • \(\Delta\omega = \alpha t\)

What this formula means

When angular acceleration is constant, angular velocity changes linearly with time. The final angular velocity equals the initial angular velocity plus the product of angular acceleration and elapsed time.

Scientific principle

Principle

Constant angular acceleration means that angular velocity changes by equal amounts during equal time intervals. Integrating the constant angular acceleration over time gives the angular-velocity equation.

Derivation

  • Start with the definition of angular acceleration: α = dω/dt.

  • For constant angular acceleration, rearrange to obtain dω = α dt.

  • Integrate from initial angular velocity ω₀ at t = 0 to final angular velocity ω at time t: ∫(ω₀ to ω) dω = ∫(0 to t) α dt.

  • Because α is constant, the integration gives ω − ω₀ = αt.

  • Rearrange to obtain ω = ω₀ + αt.

Result

For constant angular acceleration, final angular velocity is the initial angular velocity plus angular acceleration multiplied by elapsed time.

Variables and their meanings

Ω

Final angular velocity.

Ω₀

Initial angular velocity at the beginning of the interval.

Α

Constant angular acceleration.

T

Elapsed time.

Δω

Change in angular velocity.

SI units and conversions

SIUnit

radian per second (rad/s)

Dimensions

[T⁻¹]

Notes

  • Angular acceleration must be in rad/s² and time in seconds.

  • The product αt has units of rad/s.

  • All angular velocities must use the same sign convention.

Conditions of use

  • Angular acceleration must remain constant throughout the time interval.

  • The initial angular velocity must be known.

  • The equation is most directly used for rotation about a fixed axis.

  • The time interval must be measured from the instant at which ω₀ is specified.

Limitations and assumptions

  • The equation is not generally valid when angular acceleration varies with time.

  • It assumes a consistent rotational axis and sign convention.

  • The equation gives angular velocity, not angular displacement or total angular distance.

  • For variable angular acceleration, angular velocity must instead be obtained by integration.

Step-by-step worked examples

ProblemSolutionAnswer

A wheel initially rotates at 5 rad/s and has a constant angular acceleration of 3 rad/s² for 4 seconds. Find its final angular velocity.

  • Given: ω₀ = 5 rad/s, α = 3 rad/s², and t = 4 s.

  • Apply ω = ω₀ + αt.

  • Substitute: ω = 5 + (3 × 4).

  • Therefore, ω = 17 rad/s.

The final angular velocity is 17 rad/s.

Real-world applications

  • Calculating the rotational speed of a motor during startup under approximately constant angular acceleration.

  • Estimating wheel angular velocity during a controlled acceleration period.

  • Analysing rotating machinery under constant acceleration conditions.

  • Studying the spin-up of laboratory turntables.

  • Solving rotational-motion problems involving constant angular acceleration.

Topics

  • kinematics

  • constant angular acceleration

  • angular velocity

  • rotational equations

Formula Meaning

When angular acceleration is constant, angular velocity changes linearly with time. The final angular velocity equals the initial angular velocity plus the product of angular acceleration and elapsed time.

Sources and further reading

No source has been supplied for this item yet. Treat the claim as needing editorial verification.

← Back to Formula Hub · Suggest a correction or source