This equation calculates angular displacement during a time interval when angular acceleration is constant. It combines the displacement due to initial angular velocity with the additional displacement caused by angular acceleration.
Angular Displacement Under Constant Angular Acceleration
This equation calculates angular displacement during a time interval when angular acceleration is constant. It combines the displacement due to initial angular velocity with the additional displacement caused by angular acceleration.
\(\Delta_{\theta} = \omega_{0}t + \frac{1}{2}\alpha t^{2}\)
\(\theta = \theta_{0} + \omega_{0}t + \frac{1}{2}\alpha t^{2}\)
What this formula means
Scientific principle
Principle
Angular displacement is the time integral of angular velocity. Under constant angular acceleration, angular velocity changes linearly with time, so integrating it produces a quadratic expression for angular displacement.
Derivation
For constant angular acceleration, angular velocity is ω(t) = ω₀ + αt.
Angular velocity is the time derivative of angular position: ω = dθ/dt.
Substitute: dθ/dt = ω₀ + αt.
Rearrange: dθ = (ω₀ + αt)dt.
Integrate from initial angular position θ₀ at t = 0 to angular position θ at time t: Δθ = ∫₀ᵗ(ω₀ + αt)dt.
Integrating gives Δθ = ω₀t + ½αt².
Since Δθ = θ − θ₀, the position equation is θ = θ₀ + ω₀t + ½αt².
Result
Angular displacement under constant angular acceleration equals initial angular velocity multiplied by time plus one-half angular acceleration multiplied by time squared.
Variables and their meanings
Δθ
Angular displacement during the time interval.
Θ
Final angular position.
Θ₀
Initial angular position.
Ω₀
Initial angular velocity.
Α
Constant angular acceleration.
T
Elapsed time.
SI units and conversions
SIUnit
radian (rad)
Dimensions
Dimensionless
Notes
Use rad/s for angular velocity, rad/s² for angular acceleration, and seconds for time.
The term ω₀t has units of radians.
The term ½αt² also has units of radians.
The equation uses signed angular quantities.
Conditions of use
Angular acceleration must be constant throughout the interval.
The initial angular velocity and time interval must be known.
The angular motion must be described using a consistent rotational axis and sign convention.
The time variable must be measured from the instant corresponding to θ₀ and ω₀.
Limitations and assumptions
The equation is not valid for arbitrary time-varying angular acceleration.
It calculates net angular displacement, not necessarily the total angular distance travelled if the object reverses direction.
The scalar equation assumes rotation about a fixed axis.
For variable angular acceleration, angular displacement must be calculated by integrating angular velocity over time.
Step-by-step worked examples
| Problem | Solution | Answer |
|---|---|---|
A wheel starts with an angular velocity of 4 rad/s and rotates with a constant angular acceleration of 2 rad/s² for 5 seconds. Find its angular displacement. |
| The angular displacement is 45 rad. |
Real-world applications
Calculating how far a motor shaft rotates during acceleration.
Estimating the angular movement of wheels during a controlled speed increase.
Analysing the motion of rotating machinery during startup.
Determining the rotation of a turntable under constant angular acceleration.
Solving engineering problems involving rotational motion.
Topics
kinematics
angular displacement
constant angular acceleration
rotational motion
Formula Meaning
This equation calculates angular displacement during a time interval when angular acceleration is constant. It combines the displacement due to initial angular velocity with the additional displacement caused by angular acceleration.
Sources and further reading
No source has been supplied for this item yet. Treat the claim as needing editorial verification.