This equation relates initial angular velocity, final angular velocity, angular acceleration, and angular displacement without involving time. It is useful when the time taken for rotational motion is unknown or unnecessary.
Angular Velocity–Displacement Relation
This equation relates initial angular velocity, final angular velocity, angular acceleration, and angular displacement without involving time. It is useful when the time taken for rotational motion is unknown or unnecessary.
\(\omega^{2} = \omega_{0}^{2} + 2\alpha\Delta_{\theta}\)
\(\omega^{2} = \omega_{0}^{2} + 2\alpha(\theta - \theta_{0})\)
What this formula means
Scientific principle
Principle
For constant angular acceleration, angular acceleration can be related to angular velocity and angular position through the chain rule. Integrating this relationship produces an equation connecting angular velocity and angular displacement.
Derivation
Begin with angular acceleration: α = dω/dt.
Using the chain rule, dω/dt = (dω/dθ)(dθ/dt).
Since dθ/dt = ω, write α = ω(dω/dθ).
Rearrange: ω dω = α dθ.
For constant α, integrate from ω₀ to ω and from θ₀ to θ: ∫(ω₀ to ω) ω dω = α∫(θ₀ to θ) dθ.
Evaluate the integrals: ½(ω² − ω₀²) = α(θ − θ₀).
Multiply by 2 and use Δθ = θ − θ₀.
Therefore, ω² = ω₀² + 2αΔθ.
Result
The square of final angular velocity equals the square of initial angular velocity plus twice the constant angular acceleration multiplied by angular displacement.
Variables and their meanings
Ω
Final angular velocity.
Ω₀
Initial angular velocity.
Α
Constant angular acceleration.
Δθ
Angular displacement.
Θ
Final angular position.
Θ₀
Initial angular position.
SI units and conversions
SIUnit
Angular velocity in rad/s; angular acceleration in rad/s²; angular displacement in rad.
Dimensions
Both sides have dimensions [T⁻²].
Notes
Angular displacement must be expressed in radians.
The term 2αΔθ has units of rad²/s², conventionally expressed as (rad/s)².
Use consistent signs for angular acceleration and angular displacement.
Conditions of use
Angular acceleration must be constant.
Initial angular velocity and angular displacement must refer to the same interval.
The equation is most directly applicable to rotation about a fixed axis.
It is especially useful when elapsed time is not provided or is not required.
Limitations and assumptions
The equation is not generally valid for variable angular acceleration.
It does not determine elapsed time.
The equation determines the square of angular velocity; the physically appropriate direction or sign must be determined from the motion.
The scalar relation assumes a consistent rotational axis and angular coordinate.
Step-by-step worked examples
| Problem | Solution | Answer |
|---|---|---|
A wheel has an initial angular velocity of 6 rad/s and undergoes a constant angular acceleration of 2 rad/s² through an angular displacement of 20 rad. Find its final angular velocity. |
| The final angular velocity is approximately 10.77 rad/s. |
Real-world applications
Calculating the final rotational speed of a wheel after a known angular displacement.
Determining the speed of a rotating shaft without measuring elapsed time.
Analysing the rotational acceleration of engines and turbines.
Studying the stopping behaviour of rotating machinery under constant angular deceleration.
Solving rotational kinematics problems in mechanical engineering.
Topics
kinematics
angular velocity
angular displacement
constant angular acceleration
rotational equations
Formula Meaning
This equation relates initial angular velocity, final angular velocity, angular acceleration, and angular displacement without involving time. It is useful when the time taken for rotational motion is unknown or unnecessary.
Sources and further reading
No source has been supplied for this item yet. Treat the claim as needing editorial verification.