Frequency is the number of complete revolutions per unit time. In uniform circular motion, angular velocity equals 2π multiplied by frequency because each revolution corresponds to 2π radians.
Frequency–Angular Velocity Relation
Frequency is the number of complete revolutions per unit time. In uniform circular motion, angular velocity equals 2π multiplied by frequency because each revolution corresponds to 2π radians.
\(\omega = 2\pi f\)
\(f = \omega/(2\pi)\)
What this formula means
Scientific principle
Principle
Frequency counts the number of complete revolutions per second, while angular velocity measures angular displacement per second. Multiplying the number of revolutions per second by 2π radians per revolution converts frequency into angular velocity.
Derivation
One complete revolution corresponds to 2π radians.
Let f represent the number of revolutions per second.
In one second, an object rotating uniformly completes f revolutions.
Its angular displacement per second is therefore 2πf radians per second.
Hence, ω = 2πf.
Rearranging gives f = ω/(2π).
Result
Angular velocity equals 2π times rotational frequency when frequency is measured in revolutions per second.
Variables and their meanings
Ω
Angular velocity or angular speed, depending on whether direction is included.
F
Frequency, the number of complete revolutions per second.
2π
Angular displacement in radians per complete revolution.
SI units and conversions
SIUnit
Angular velocity: rad/s; frequency: hertz (Hz), equivalent to s⁻¹.
Dimensions
Both quantities have dimensions [T⁻¹].
Notes
Frequency must be expressed in hertz to obtain angular velocity in rad/s.
If rotational speed is given in revolutions per minute, convert it to revolutions per second by dividing by 60.
For frequency, use a nonnegative value; the sign of angular velocity indicates direction under a chosen convention.
Conditions of use
Frequency must count complete revolutions per unit time.
The formula directly describes constant-frequency rotation in uniform circular motion.
The relation can also be used for periodic rotation by using the appropriate cycle frequency.
Angular velocity and frequency must refer to the same rotational motion.
Limitations and assumptions
Frequency alone does not specify the direction of rotation.
For non-uniform rotation, a single constant frequency may not describe the instantaneous motion.
The formula assumes one full cycle corresponds to 2π radians.
Do not substitute revolutions per minute directly as hertz without converting the time unit.
Step-by-step worked examples
| Problem | Solution | Answer |
|---|---|---|
A fan rotates at a frequency of 5 revolutions per second. Calculate its angular speed. |
| The angular speed is 10π rad/s, approximately 31.42 rad/s. |
A motor rotates at 1200 revolutions per minute. Calculate its frequency in hertz and angular speed. |
| The frequency is 20 Hz and the angular speed is 40π rad/s, approximately 125.66 rad/s. |
Real-world applications
Converting motor rotational frequency into angular speed.
Calculating the rotation rate of fans, turbines, and generators.
Studying periodic rotation in mechanical systems.
Determining the angular speed of wheels from measured rotational frequency.
Analysing the periodic motion of rotating astronomical objects.
Topics
kinematics
frequency
angular velocity
rotational motion
circular motion
Formula Meaning
Frequency is the number of complete revolutions per unit time. In uniform circular motion, angular velocity equals 2π multiplied by frequency because each revolution corresponds to 2π radians.
Sources and further reading
No source has been supplied for this item yet. Treat the claim as needing editorial verification.