✦ScienexySCIENCE KNOWLEDGE LIBRARY
General science · SCI-FORM-KIN-068

Velocity of a Point on a Rigid Body

The velocity of a point P on a rigid body equals the velocity of a chosen reference point O on the body plus the rotational contribution produced by the body's angular velocity. The cross product determines both the magnitude and direction of the rotational velocity.

\(\vec{v}_{p} = \vec{v}_{o} + \vec{\omega} \times \vec{r}_{p}/_{o}\)

What this formula means

The velocity of a point P on a rigid body equals the velocity of a chosen reference point O on the body plus the rotational contribution produced by the body's angular velocity. The cross product determines both the magnitude and direction of the rotational velocity.

Scientific principle

Principle

Rigid-body motion can be decomposed into translation of a reference point and rotation about that point. Because the distance between any two points fixed in a rigid body remains constant, their relative motion is described by angular velocity.

Derivation

  • Let O be a reference point fixed on a rigid body and P another point on the same body.

  • Write the position of P as r⃗ₚ = r⃗ₒ + r⃗ₚ/ₒ, where r⃗ₚ/ₒ is the position of P relative to O.

  • Differentiate with respect to time in an inertial frame.

  • This gives v⃗ₚ = v⃗ₒ + d(r⃗ₚ/ₒ)/dt.

  • For a vector fixed in a rotating rigid body, its inertial-frame derivative is ω⃗ × r⃗ₚ/ₒ.

  • Substituting this rotational derivative gives v⃗ₚ = v⃗ₒ + ω⃗ × r⃗ₚ/ₒ.

Result

v⃗ₚ = v⃗ₒ + ω⃗ × r⃗ₚ/ₒ

Variables and their meanings

V⃗ₚ

Velocity of point P in an inertial reference frame (m/s).

V⃗ₒ

Velocity of reference point O in the same inertial frame (m/s).

Ω⃗

Angular velocity vector of the rigid body (rad/s).

R⃗ₚ/ₒ

Position vector from reference point O to point P (m).

×

Vector cross product, which produces a vector perpendicular to both input vectors.

SI units and conversions

Linear velocity

Metre per second (m/s).

Angular velocity

Radian per second (rad/s).

Position

Metre (m).

Consistency

The rotational term has units (rad/s) × m = m/s because the radian is dimensionless.

Conditions of use

  • Points O and P must belong to the same rigid body.

  • The angular velocity vector must describe the body's instantaneous rotation.

  • The position vector must point from O to P.

  • All velocities and vectors must be expressed in the same coordinate frame.

  • The equation is valid for general instantaneous rigid-body motion, including simultaneous translation and rotation.

Limitations and assumptions

  • The formula assumes the body is rigid, so distances between its material points remain constant.

  • It does not directly describe deformation within flexible bodies.

  • The rotational contribution depends on the chosen reference point, although the final velocity of P is independent of that choice when the equation is applied correctly.

  • Angular velocity must be treated as a vector; using only its magnitude can lose directional information.

Step-by-step worked examples

ProblemGivenSolutionAnswer

A rigid disk rotates counterclockwise at 4 rad/s about a fixed centre O. Point P is 0.5 m to the right of the centre. Find the velocity of P.

Vₒ

0 m/s

Ω

4 rad/s along the positive z-axis

Rₚ/ₒ

0.5 m along the positive x-axis

  • Use v⃗ₚ = v⃗ₒ + ω⃗ × r⃗ₚ/ₒ.

  • The reference point is fixed, so v⃗ₒ = 0.

  • The cross product gives a velocity in the positive y-direction.

  • Calculate the magnitude: v = ωr = 4 × 0.5 = 2 m/s.

2 m/s upward at that instant.

A rigid platform translates east at 3 m/s while rotating counterclockwise at 2 rad/s. A point is located 1 m to the right of the chosen reference point. Find its instantaneous velocity.

Vₒ

3 m/s east

Ω

2 rad/s along the positive z-axis

Rₚ/ₒ

1 m along the positive x-axis

  • The translational contribution is 3 m/s east.

  • The rotational contribution has magnitude ωr = 2 × 1 = 2 m/s north.

  • Add the perpendicular velocity components.

  • The resulting speed is √(3² + 2²) = √13 ≈ 3.61 m/s.

The point moves at approximately 3.61 m/s, directed 33.7° north of east.

Real-world applications

  • Determining the velocity of points on rotating wheels, gears, and disks.

  • Analyzing the motion of robotic arms and mechanical linkages.

  • Calculating the velocity of points on aircraft propellers and rotating machinery.

  • Studying the combined translation and rotation of vehicles and rigid platforms.

  • Solving instantaneous velocity problems in engineering mechanics.

Topics

  • rigid body motion

  • angular velocity

  • cross product

  • translation and rotation

  • kinematics

Formula Meaning

The velocity of a point P on a rigid body equals the velocity of a chosen reference point O on the body plus the rotational contribution produced by the body's angular velocity. The cross product determines both the magnitude and direction of the rotational velocity.

Sources and further reading

No source has been supplied for this item yet. Treat the claim as needing editorial verification.

← Back to Formula Hub · Suggest a correction or source