✦ScienexySCIENCE KNOWLEDGE LIBRARY
General science · SCI-FORM-KIN-069

Acceleration of a Point on a Rigid Body

The acceleration of point P on a rigid body is the sum of the reference point's translational acceleration, the tangential acceleration caused by angular acceleration, and the centripetal acceleration caused by angular velocity.

\(\vec{a}_{p} = \vec{a}_{o} + \vec{\alpha} \times \vec{r}_{p}/_{o} + \vec{\omega} \times (\vec{\omega} \times \vec{r}_{p}/_{o})\)

What this formula means

The acceleration of point P on a rigid body is the sum of the reference point's translational acceleration, the tangential acceleration caused by angular acceleration, and the centripetal acceleration caused by angular velocity.

Scientific principle

Principle

Rigid-body acceleration is obtained by differentiating the rigid-body velocity equation. The time derivative of angular velocity produces the tangential rotational contribution, while differentiating the rotating position vector produces the centripetal contribution.

Derivation

  • Start with v⃗ₚ = v⃗ₒ + ω⃗ × r⃗ₚ/ₒ.

  • Differentiate both sides with respect to time in an inertial frame.

  • The derivative of v⃗ₚ is a⃗ₚ, and the derivative of v⃗ₒ is a⃗ₒ.

  • Apply the product rule to the cross product: d(ω⃗ × r⃗)/dt = α⃗ × r⃗ + ω⃗ × dr⃗/dt.

  • For a point fixed on the rigid body, dr⃗ₚ/ₒ/dt = ω⃗ × r⃗ₚ/ₒ.

  • Substitute this relation into the product rule.

  • The result is a⃗ₚ = a⃗ₒ + α⃗ × r⃗ₚ/ₒ + ω⃗ × (ω⃗ × r⃗ₚ/ₒ).

Result

a⃗ₚ = a⃗ₒ + α⃗ × r⃗ₚ/ₒ + ω⃗ × (ω⃗ × r⃗ₚ/ₒ)

Variables and their meanings

A⃗ₚ

Acceleration of point P in an inertial frame (m/s²).

A⃗ₒ

Acceleration of reference point O (m/s²).

Α⃗

Angular acceleration vector of the rigid body (rad/s²).

Ω⃗

Angular velocity vector of the rigid body (rad/s).

R⃗ₚ/ₒ

Position vector from O to P (m).

Α⃗ × r⃗ₚ/ₒ

Tangential rotational acceleration contribution.

Ω⃗ × (ω⃗ × r⃗ₚ/ₒ)

Centripetal rotational acceleration contribution, directed toward the instantaneous rotation axis for planar rotation.

SI units and conversions

Linear acceleration

Metre per second squared (m/s²).

Angular velocity

Radian per second (rad/s).

Angular acceleration

Radian per second squared (rad/s²).

Position

Metre (m).

Consistency

Both rotational terms have units of m/s².

Conditions of use

  • Points O and P must belong to the same rigid body.

  • The position vector must be measured from O to P.

  • All vectors must be expressed in the same inertial coordinate frame.

  • The body must be rigid, with no relative deformation between its material points.

  • The equation applies to instantaneous general rigid-body motion.

Limitations and assumptions

  • The equation does not account for deformation of flexible bodies.

  • The reference point O may be fixed or moving, but its acceleration must be included.

  • The cross-product form is necessary for general three-dimensional rotation; simplified scalar formulas may not apply to arbitrary spatial motion.

  • The formula describes the acceleration of a material point fixed on the rigid body, not a point sliding relative to it.

Step-by-step worked examples

ProblemGivenSolutionAnswer

A disk rotates about a fixed centre with angular velocity 5 rad/s. A point P lies 0.4 m from the centre. The angular velocity is constant. Find the acceleration of P.

Aₒ

0 m/s²

Ω

5 rad/s

Α

0 rad/s²

R

0.4 m

  • Since the centre is fixed and angular velocity is constant, aₒ = 0 and α = 0.

  • Only the centripetal contribution remains.

  • Calculate its magnitude: a = ω²r.

  • a = 5² × 0.4 = 10 m/s².

  • The acceleration points toward the centre.

10 m/s² toward the centre of the disk.

A point on a rotating arm is 0.5 m from a fixed pivot. The arm has angular velocity 3 rad/s and angular acceleration 4 rad/s². Find the magnitudes of its tangential and centripetal acceleration components.

R

0.5 m

Ω

3 rad/s

Α

4 rad/s²

  • Tangential acceleration magnitude: aₜ = αr = 4 × 0.5 = 2 m/s².

  • Centripetal acceleration magnitude: a꜀ = ω²r = 3² × 0.5 = 4.5 m/s².

  • These components are perpendicular for planar rotation.

  • The total acceleration magnitude is √(2² + 4.5²) = √24.25 ≈ 4.92 m/s².

Tangential acceleration = 2 m/s²; centripetal acceleration = 4.5 m/s²; total acceleration ≈ 4.92 m/s².

Real-world applications

  • Calculating accelerations of points on rotating machinery.

  • Analyzing robotic joints, rotating arms, and mechanical linkages.

  • Determining the acceleration of points on vehicle wheels and engine components.

  • Studying the motion of propeller blades and rotating structures.

  • Solving engineering problems involving simultaneous translation and rotation.

Topics

  • rigid body acceleration

  • angular acceleration

  • centripetal acceleration

  • tangential acceleration

  • rotational kinematics

Formula Meaning

The acceleration of point P on a rigid body is the sum of the reference point's translational acceleration, the tangential acceleration caused by angular acceleration, and the centripetal acceleration caused by angular velocity.

Sources and further reading

No source has been supplied for this item yet. Treat the claim as needing editorial verification.

← Back to Formula Hub · Suggest a correction or source