✦ScienexySCIENCE KNOWLEDGE LIBRARY
General science · SCI-FORM-KIN-070

Rolling Without Slipping — Velocity Constraint

For pure rolling without slipping, the point of the wheel in contact with a stationary surface has zero instantaneous velocity relative to the surface. This condition links the translational velocity of the wheel's centre to its angular velocity. For a wheel of radius R rolling on a stationary horizontal surface, the centre's speed equals Rω.

\(\vec{v}c_{m} = \vec{v}_{o} + \vec{\omega} \times \vec{r}c_{m}/_{o}; \text{ for } a wheel on a stationary horizontal surface: vc_{m} = R\omega\)

What this formula means

For pure rolling without slipping, the point of the wheel in contact with a stationary surface has zero instantaneous velocity relative to the surface. This condition links the translational velocity of the wheel's centre to its angular velocity. For a wheel of radius R rolling on a stationary horizontal surface, the centre's speed equals Rω.

Scientific principle

Principle

Pure rolling combines translation of the wheel's centre with rotation about the centre. At the instant of contact, the translational velocity and rotational velocity of the contact point cancel each other, producing zero relative velocity at the contact.

Derivation

  • Consider a wheel of radius R rolling to the right on a stationary horizontal surface.

  • Let its centre move rightward with velocity v꜀ₘ.

  • The wheel rotates clockwise with angular speed ω.

  • The velocity of the bottom contact point relative to the centre has magnitude Rω and points leftward.

  • The absolute velocity of the contact point is the vector sum of the centre velocity and rotational velocity.

  • For no slipping, the contact point's velocity relative to the stationary surface must be zero.

  • Therefore, v꜀ₘ − Rω = 0.

  • Rearranging gives v꜀ₘ = Rω.

Result

v꜀ₘ = Rω, for pure rolling on a stationary horizontal surface.

Variables and their meanings

V⃗꜀ₘ

Translational velocity vector of the wheel's centre of mass (m/s).

V꜀ₘ

Speed of the wheel's centre of mass (m/s).

R

Radius of the wheel (m).

Ω

Magnitude of the wheel's angular velocity (rad/s).

V⃗꜀ₒₙₜₐ꜀ₜ

Instantaneous velocity of the contact point relative to the ground (m/s).

R⃗꜀ₘ/ₒ

Position vector from a chosen reference point O to the wheel's centre of mass (m).

SI units and conversions

Linear velocity

Metre per second (m/s).

Angular velocity

Radian per second (rad/s).

Radius

Metre (m).

Consistency

Rω has units m × rad/s = m/s because the radian is dimensionless.

Conditions of use

  • The wheel must roll without slipping at the contact surface.

  • The contact surface must be stationary for the simplified condition v꜀ₘ = Rω.

  • The wheel must have a well-defined rolling radius R.

  • The equation applies instantaneously, even if the wheel's speed changes over time.

  • For a wheel rolling on a moving surface, the contact point's velocity must equal the surface velocity rather than zero.

Limitations and assumptions

  • If slipping occurs, the relation v꜀ₘ = Rω is not valid.

  • The simple scalar relation assumes straight-line rolling on a horizontal surface.

  • For a moving or rotating support surface, the ground-relative velocity constraint must be modified.

  • The formula describes the kinematic constraint, not the forces or energy involved in rolling.

  • For deformable wheels or surfaces, the effective contact geometry may require a more detailed model.

Step-by-step worked examples

ProblemGivenSolutionAnswer

A bicycle wheel has a radius of 0.35 m and rolls without slipping at an angular speed of 8 rad/s. Find the bicycle's speed.

R

0.35 m

Ω

8 rad/s

  • Use v꜀ₘ = Rω.

  • Substitute: v꜀ₘ = 0.35 × 8.

  • Calculate: v꜀ₘ = 2.8 m/s.

The bicycle moves at 2.8 m/s.

A wheel of radius 0.25 m moves at 5 m/s without slipping. Determine its angular speed.

V꜀ₘ

5 m/s

R

0.25 m

  • Start with v꜀ₘ = Rω.

  • Rearrange: ω = v꜀ₘ/R.

  • Substitute: ω = 5/0.25.

  • Calculate: ω = 20 rad/s.

20 rad/s.

Real-world applications

  • Relating the speed of a vehicle to the rotational speed of its wheels.

  • Analyzing bicycle and motorcycle wheel motion.

  • Studying conveyor rollers and rolling industrial components.

  • Understanding the kinematics of balls rolling on surfaces.

  • Determining the rotational speed required for a rolling wheel to travel at a specified linear speed.

Topics

  • rolling motion

  • no slipping

  • velocity constraint

  • rigid body motion

  • angular velocity

Formula Meaning

For pure rolling without slipping, the point of the wheel in contact with a stationary surface has zero instantaneous velocity relative to the surface. This condition links the translational velocity of the wheel's centre to its angular velocity. For a wheel of radius R rolling on a stationary horizontal surface, the centre's speed equals Rω.

Sources and further reading

No source has been supplied for this item yet. Treat the claim as needing editorial verification.

← Back to Formula Hub · Suggest a correction or source