✦ScienexySCIENCE KNOWLEDGE LIBRARY
General science · SCI-FORM-MED-1394

Ankle–Brachial Index

The ankle–brachial index is a ratio comparing systolic blood pressure measured at the ankle with systolic blood pressure measured in the arm. It is used as a noninvasive physiological index of lower-extremity arterial pressure.

\(ABI = Ankle Systolic Pressure/Brachial Systolic Pressure\)

What this formula means

The ankle–brachial index is a ratio comparing systolic blood pressure measured at the ankle with systolic blood pressure measured in the arm. It is used as a noninvasive physiological index of lower-extremity arterial pressure.

Scientific principle

Principle

In an unobstructed arterial circulation, systolic pressure measured at the ankle is generally comparable to or somewhat higher than brachial systolic pressure. Reduced ankle pressure relative to arm pressure can indicate impaired arterial pressure transmission to the lower limb.

Derivation

  • Let Pankle represent the selected ankle systolic pressure.

  • Let Pbrachial represent the selected brachial systolic pressure.

  • A ratio provides a dimensionless comparison between the two pressure measurements.

  • Therefore, ABI = Pankle/Pbrachial.

  • For standard bilateral assessment, the higher ankle systolic pressure from the dorsalis pedis or posterior tibial artery is generally divided by the higher brachial systolic pressure.

  • The right and left legs are evaluated separately.

Final Result

ABI = selected ankle systolic pressure ÷ higher brachial systolic pressure.

Variables and their meanings

ABI

Ankle–brachial index.

Pankle

Selected ankle systolic pressure, generally the higher of dorsalis pedis and posterior tibial systolic pressures for that leg.

Pbrachial

Higher brachial systolic pressure measured between the two arms.

SI units and conversions

ABI

Dimensionless ratio.

Ankle Pressure

mmHg.

Brachial Pressure

mmHg.

Conditions of use

  • Ankle and brachial pressures should be measured using a consistent technique.

  • The patient should be appropriately positioned and rested before measurement.

  • The pressure values must use the same units.

  • Each leg should be evaluated separately.

  • The selected ankle and brachial pressure values should follow the same standardized measurement protocol.

Limitations and assumptions

  • Arterial calcification and noncompressible arteries can produce falsely elevated ankle pressures.

  • Measurement accuracy depends on equipment, technique and operator consistency.

  • The ratio does not directly measure blood flow.

  • Results may be influenced by recent activity, temperature and physiological conditions.

  • Interpretation should account for clinical context and relevant measurement standards.

Step-by-step worked examples

ProblemSolutionAnswer

A theoretical measurement has an ankle systolic pressure of 120 mmHg and a brachial systolic pressure of 130 mmHg. Calculate ABI.

  • ABI = Ankle systolic pressure/Brachial systolic pressure.

  • ABI = 120/130.

  • ABI ≈ 0.923.

The calculated ankle–brachial index is approximately 0.92.

A theoretical model has ankle systolic pressure of 150 mmHg and brachial systolic pressure of 125 mmHg. Calculate ABI.

  • ABI = 150/125.

  • ABI = 1.20.

The calculated ankle–brachial index is 1.20.

Real-world applications

  • Studying lower-extremity arterial pressure.

  • Understanding peripheral arterial circulation.

  • Teaching noninvasive vascular assessment.

  • Comparing ankle and brachial systolic pressures.

  • Investigating physiological effects of arterial narrowing and vascular stiffness.

Formula Meaning

The ankle–brachial index is a ratio comparing systolic blood pressure measured at the ankle with systolic blood pressure measured in the arm. It is used as a noninvasive physiological index of lower-extremity arterial pressure.

Sources and further reading

No source has been supplied for this item yet. Treat the claim as needing editorial verification.

← Back to Formula Hub · Suggest a correction or source