✦ScienexySCIENCE KNOWLEDGE LIBRARY
General science · SCI-FORM-PHY-398

Change in Orbital Speed During an Ideal Hohmann Transfer

The vis-viva relation gives the orbital speed at any point on the elliptical transfer orbit used in an ideal Hohmann transfer.

\(v_{tp}(r) = \sqrt[\mu(2/r - 1/a_{t})]\)

What this formula means

Definition

The vis-viva relation gives the orbital speed at any point on the elliptical transfer orbit used in an ideal Hohmann transfer.

Interpretation

The transfer orbit has a semi-major axis equal to the average of the initial and final circular-orbit radii. Its speed differs from the circular-orbit speed at each burn location.

Mathematical Form

aₜ = (r₁ + r₂)/2; vₜₚ(r) = √[μ(2/r − 1/aₜ)].

Special Cases

  • At the initial circular orbit, the transfer speed is evaluated at r = r₁.

  • At the final circular orbit, the transfer speed is evaluated at r = r₂.

  • The first speed change is the difference between transfer-orbit periapsis speed and initial circular speed.

  • The second speed change is the difference between final circular speed and transfer-orbit apoapsis speed.

Scientific principle

Principle

An ideal Hohmann transfer uses an elliptical transfer orbit tangent to two coplanar circular orbits. The vis-viva equation determines the speed along that ellipse.

Derivation

  • Let r₁ and r₂ be the radii of the initial and final circular orbits.

  • The transfer ellipse has periapsis r₁ and apoapsis r₂.

  • Its semi-major axis is aₜ = (r₁ + r₂)/2.

  • The vis-viva equation for the transfer ellipse is v² = μ(2/r − 1/aₜ).

  • At the first burn, set r = r₁; at the second burn, set r = r₂.

  • Compare these transfer speeds with the circular speeds √(μ/r₁) and √(μ/r₂).

Final Result

vₜₚ(r) = √[μ(2/r − 1/aₜ)], with aₜ = (r₁ + r₂)/2

Variables and their meanings

Vₜₚ(r)

Speed on the Hohmann transfer ellipse at radius r, measured in m/s.

Μ

Standard gravitational parameter of the central body, measured in m³/s².

R

Distance from the central body's centre at the point of interest, measured in m.

Aₜ

Semi-major axis of the transfer ellipse, measured in m.

R₁

Radius of the initial circular orbit, measured in m.

R₂

Radius of the final circular orbit, measured in m.

SI units and conversions

SIUnit

m/s

Dimensional Formula

[L T⁻¹]

Explanation

The expression inside the square root has dimensions of m²/s².

Conditions of use

  • The initial and final orbits are circular and coplanar.

  • The transfer is an ideal two-impulse Hohmann transfer.

  • The central body's gravitational parameter is constant.

  • The transfer is modelled using Newtonian two-body dynamics.

  • The transfer ellipse is tangent to both circular orbits.

Limitations and assumptions

  • The formula gives transfer-orbit speed, not the complete burn requirement by itself.

  • It neglects atmospheric drag, thrust losses and gravitational perturbations.

  • It assumes instantaneous idealised impulses.

  • It does not include plane changes or non-coplanar transfer manoeuvres.

Step-by-step worked examples

ProblemGivenSolutionAnswer

A spacecraft transfers from a circular orbit of radius 7.0 × 10⁶ m to a circular orbit of radius 1.4 × 10⁷ m around Earth. Calculate the transfer speed at periapsis and apoapsis. Use μ = 3.986 × 10¹⁴ m³/s².

R₁

7.0 × 10⁶ m

R₂

1.4 × 10⁷ m

Μ

3.986 × 10¹⁴ m³/s²

  • Calculate aₜ = (r₁ + r₂)/2 = 1.05 × 10⁷ m.

  • At periapsis, vₚ = √[μ(2/r₁ − 1/aₜ)].

  • vₚ ≈ √[3.986 × 10¹⁴(2/(7.0 × 10⁶) − 1/(1.05 × 10⁷))].

  • vₚ ≈ 8.71 × 10³ m/s.

  • At apoapsis, vₐ = √[μ(2/r₂ − 1/aₜ)].

  • vₐ ≈ √[3.986 × 10¹⁴(2/(1.4 × 10⁷) − 1/(1.05 × 10⁷))].

  • vₐ ≈ 4.36 × 10³ m/s.

The transfer speed is approximately 8.71 km/s at periapsis and 4.36 km/s at apoapsis.

For a Hohmann transfer with initial radius 8.0 × 10⁶ m and final radius 1.2 × 10⁷ m, calculate the transfer speed at periapsis around a body with μ = 4.0 × 10¹⁴ m³/s².

R₁

8.0 × 10⁶ m

R₂

1.2 × 10⁷ m

Μ

4.0 × 10¹⁴ m³/s²

  • Calculate aₜ = (8.0 × 10⁶ + 1.2 × 10⁷)/2 = 1.0 × 10⁷ m.

  • Use vₚ = √[μ(2/r₁ − 1/aₜ)].

  • vₚ = √[4.0 × 10¹⁴(2/(8.0 × 10⁶) − 1/(1.0 × 10⁷))].

  • vₚ = √(6.0 × 10⁷).

  • vₚ ≈ 7.75 × 10³ m/s.

The transfer speed at periapsis is approximately 7.75 × 10³ m/s.

Real-world applications

  • Calculating spacecraft speeds during orbital transfers.

  • Planning idealised transfers between circular planetary orbits.

  • Estimating the speed requirements for orbital insertion and departure.

  • Understanding the relationship between orbital energy and orbital speed.

Formula Meaning

Definition

The vis-viva relation gives the orbital speed at any point on the elliptical transfer orbit used in an ideal Hohmann transfer.

Interpretation

The transfer orbit has a semi-major axis equal to the average of the initial and final circular-orbit radii. Its speed differs from the circular-orbit speed at each burn location.

Mathematical Form

aₜ = (r₁ + r₂)/2; vₜₚ(r) = √[μ(2/r − 1/aₜ)].

Special Cases

  • At the initial circular orbit, the transfer speed is evaluated at r = r₁.

  • At the final circular orbit, the transfer speed is evaluated at r = r₂.

  • The first speed change is the difference between transfer-orbit periapsis speed and initial circular speed.

  • The second speed change is the difference between final circular speed and transfer-orbit apoapsis speed.

Sources and further reading

No source has been supplied for this item yet. Treat the claim as needing editorial verification.

← Back to Formula Hub · Suggest a correction or source