✦ScienexySCIENCE KNOWLEDGE LIBRARY
General science · SCI-FORM-PHY-399

Delta-v for a Hohmann Transfer

Delta-v for a Hohmann transfer is the total magnitude of the two ideal velocity changes required to move between two coplanar circular orbits.

\(\Delta v_{tot} = |\Delta v_{1}| + |\Delta v_{2}|\)

What this formula means

Definition

Delta-v for a Hohmann transfer is the total magnitude of the two ideal velocity changes required to move between two coplanar circular orbits.

Interpretation

The first impulse places the spacecraft onto the elliptical transfer orbit. The second impulse circularises the orbit at the destination radius.

Mathematical Form

Δv₁ = √[μ/r₁](√[2r₂/(r₁ + r₂)] − 1); Δv₂ = √[μ/r₂](1 − √[2r₁/(r₁ + r₂)]). For an outward transfer where r₂ > r₁, Δvₜₒₜ = Δv₁ + Δv₂.

Special Cases

  • For an outward transfer, the first burn increases orbital speed and the second burn also increases speed relative to the transfer ellipse.

  • For an inward transfer, the burn directions reverse; magnitudes must be used when calculating total delta-v.

  • If r₁ = r₂, no transfer manoeuvre is required in the ideal model.

Scientific principle

Principle

The formula is derived by comparing circular-orbit speeds with the transfer-ellipse speeds at periapsis and apoapsis.

Derivation

  • The circular speed at radius r is v꜀ = √(μ/r).

  • The transfer ellipse has semi-major axis aₜ = (r₁ + r₂)/2.

  • Using the vis-viva equation, the transfer speed at r₁ is vₜ₁ = √[μ(2/r₁ − 1/aₜ)].

  • The first burn magnitude is |Δv₁| = |vₜ₁ − √(μ/r₁)|.

  • At r₂, the transfer speed is vₜ₂ = √[μ(2/r₂ − 1/aₜ)].

  • The second burn magnitude is |Δv₂| = |√(μ/r₂) − vₜ₂|.

  • The total ideal delta-v is the sum of the magnitudes of the two impulses.

Final Result

Δvₜₒₜ = |vₜ₁ − √(μ/r₁)| + |√(μ/r₂) − vₜ₂|

Variables and their meanings

Δvₜₒₜ

Total delta-v magnitude, measured in m/s.

Δv₁

Velocity change at the initial orbit, measured in m/s.

Δv₂

Velocity change at the destination orbit, measured in m/s.

Μ

Standard gravitational parameter of the central body, measured in m³/s².

R₁

Initial circular-orbit radius, measured in m.

R₂

Final circular-orbit radius, measured in m.

V꜀

Circular orbital speed at the relevant radius, measured in m/s.

Vₜ₁

Transfer-ellipse speed at periapsis, measured in m/s.

Vₜ₂

Transfer-ellipse speed at apoapsis, measured in m/s.

SI units and conversions

SIUnit

m/s

Dimensional Formula

[L T⁻¹]

Explanation

Delta-v is a velocity difference and therefore has dimensions of length per unit time.

Conditions of use

  • The initial and final orbits are circular and coplanar.

  • The transfer is an ideal two-impulse Hohmann transfer.

  • The central body dominates the gravitational field.

  • The transfer follows Newtonian two-body dynamics.

  • The spacecraft performs ideal instantaneous impulses.

Limitations and assumptions

  • The result excludes gravity losses, steering losses and finite-burn effects.

  • It does not include plane-change delta-v.

  • It excludes atmospheric drag and third-body perturbations.

  • The total delta-v is the sum of burn magnitudes, not the magnitude of the vector sum of the two burns.

Step-by-step worked examples

ProblemGivenSolutionAnswer

Calculate the total delta-v for an ideal outward Hohmann transfer from a circular orbit of radius 7.0 × 10⁶ m to one of radius 1.4 × 10⁷ m around Earth. Use μ = 3.986 × 10¹⁴ m³/s².

R₁

7.0 × 10⁶ m

R₂

1.4 × 10⁷ m

Μ

3.986 × 10¹⁴ m³/s²

  • Initial circular speed: v꜀₁ = √(μ/r₁) ≈ 7.55 × 10³ m/s.

  • Final circular speed: v꜀₂ = √(μ/r₂) ≈ 5.33 × 10³ m/s.

  • Transfer speed at periapsis: vₜ₁ ≈ 8.71 × 10³ m/s.

  • Transfer speed at apoapsis: vₜ₂ ≈ 4.36 × 10³ m/s.

  • First burn: Δv₁ = 8.71 − 7.55 ≈ 1.16 km/s.

  • Second burn: Δv₂ = 5.33 − 4.36 ≈ 0.97 km/s.

  • Total: Δvₜₒₜ ≈ 1.16 + 0.97 = 2.13 km/s.

The ideal total Hohmann-transfer delta-v is approximately 2.13 km/s.

Find the total delta-v for an ideal outward transfer from radius 8.0 × 10⁶ m to radius 1.2 × 10⁷ m around a body with μ = 4.0 × 10¹⁴ m³/s².

R₁

8.0 × 10⁶ m

R₂

1.2 × 10⁷ m

Μ

4.0 × 10¹⁴ m³/s²

  • Initial circular speed: v꜀₁ = √(4.0 × 10¹⁴ / 8.0 × 10⁶) ≈ 7.07 × 10³ m/s.

  • Final circular speed: v꜀₂ = √(4.0 × 10¹⁴ / 1.2 × 10⁷) ≈ 5.77 × 10³ m/s.

  • Transfer semi-major axis: aₜ = 1.0 × 10⁷ m.

  • Transfer periapsis speed: vₜ₁ ≈ 7.75 × 10³ m/s.

  • Transfer apoapsis speed: vₜ₂ ≈ 5.16 × 10³ m/s.

  • First burn: Δv₁ ≈ 0.68 × 10³ m/s.

  • Second burn: Δv₂ ≈ 0.61 × 10³ m/s.

  • Total: Δvₜₒₜ ≈ 1.29 × 10³ m/s.

The ideal total delta-v is approximately 1.29 × 10³ m/s.

Real-world applications

  • Estimating spacecraft propulsion requirements for orbital transfers.

  • Comparing the fuel-efficiency of different orbital manoeuvres.

  • Planning idealised transfers between planetary and satellite orbits.

  • Estimating mission delta-v budgets before accounting for real-world losses.

Formula Meaning

Definition

Delta-v for a Hohmann transfer is the total magnitude of the two ideal velocity changes required to move between two coplanar circular orbits.

Interpretation

The first impulse places the spacecraft onto the elliptical transfer orbit. The second impulse circularises the orbit at the destination radius.

Mathematical Form

Δv₁ = √[μ/r₁](√[2r₂/(r₁ + r₂)] − 1); Δv₂ = √[μ/r₂](1 − √[2r₁/(r₁ + r₂)]). For an outward transfer where r₂ > r₁, Δvₜₒₜ = Δv₁ + Δv₂.

Special Cases

  • For an outward transfer, the first burn increases orbital speed and the second burn also increases speed relative to the transfer ellipse.

  • For an inward transfer, the burn directions reverse; magnitudes must be used when calculating total delta-v.

  • If r₁ = r₂, no transfer manoeuvre is required in the ideal model.

Sources and further reading

No source has been supplied for this item yet. Treat the claim as needing editorial verification.

← Back to Formula Hub · Suggest a correction or source