✦ScienexySCIENCE KNOWLEDGE LIBRARY
General science · SCI-FORM-ROT-360

Work Done by a Variable Torque

Work done by a variable torque is the definite integral of the torque component along the rotation axis with respect to angular displacement.

\(W = \int(from \theta_{1} to \theta_{2}) \tau(\theta)d\theta\)

What this formula means

Definition

Work done by a variable torque is the definite integral of the torque component along the rotation axis with respect to angular displacement.

Interpretation

When torque changes during rotation, the work is obtained by adding the infinitesimal contributions of torque over small angular displacements.

Mathematical Significance

This formula generalizes rotational work to systems in which torque depends on angular position, such as torsional springs and position-dependent mechanical loads.

Special Cases

  • For constant torque, the integral reduces to W = τΔθ.

  • If torque varies linearly with angular displacement, the work can be calculated from the area under a straight-line torque-angle graph.

  • If torque changes sign, positive and negative work contributions must be included with their signs.

  • For a conservative torsional spring, the work done by the spring depends on the initial and final angular positions.

Scientific principle

Principle

The work done by a variable torque is the accumulated sum of infinitesimal torque contributions over angular displacement.

Derivation

  • For an infinitesimal angular displacement dθ, the work contribution is dW = τ(θ)dθ.

  • If torque depends on angular position, it cannot generally be treated as a constant.

  • Integrate the incremental work from the initial angle θ₁ to the final angle θ₂.

  • W = ∫(from θ₁ to θ₂) τ(θ)dθ.

  • The result is the signed area under the torque-versus-angular-displacement graph.

Final Result

W = ∫(from θ₁ to θ₂) τ(θ)dθ

Variables and their meanings

W

Total work done by the variable torque.

Τ(θ)

Torque as a function of angular position.

Θ

Angular position, measured in radians.

Θ₁

Initial angular position.

Θ₂

Final angular position.

Dθ

Infinitesimal angular displacement.

SI units and conversions

Si Unit

joule (J)

Dimensional Formula

[M L² T⁻²]

Explanation

The torque has dimension M L² T⁻², while angular displacement in radians is dimensionless. Integration over angular position therefore gives energy.

Conditions of use

  • The torque must be expressible as a function of angular position or through an equivalent known relationship.

  • The initial and final angular positions must be specified.

  • Angular positions must be expressed in radians.

  • The torque component must be measured about the same axis as the angular displacement.

Limitations and assumptions

  • The integral may require analytical or numerical methods if the torque function is complicated.

  • The torque must be known over the full angular interval.

  • The formula calculates work about the specified rotation axis and does not by itself describe translational work.

  • If torque depends on time or velocity as well as position, the relationship must be expressed along the actual motion before integration.

Step-by-step worked examples

ProblemGivenSolutionAnswer

A variable torque is given by τ(θ) = 4θ N·m. Find the work done as a body rotates from 0 to 2 radians.

Torque Function

τ(θ) = 4θ N·m

Initial Angle

0 rad

Final Angle

2 rad

  • Use W = ∫(from θ₁ to θ₂) τ(θ)dθ.

  • Substitute the torque function: W = ∫(from 0 to 2) 4θdθ.

  • Integrate: W = [2θ²] from 0 to 2.

  • W = 2(2²) - 2(0²).

  • W = 8 J.

The work done is 8 J.

A torsional spring exerts a restoring torque τ = -6θ N·m. Find the work done by the spring when it moves from an angular position of 2 radians to 1 radian.

Torque Function

τ(θ) = -6θ N·m

Initial Angle

2 rad

Final Angle

1 rad

  • Use W = ∫(from θ₁ to θ₂) τ(θ)dθ.

  • Substitute: W = ∫(from 2 to 1) -6θdθ.

  • Integrate: W = [-3θ²] from 2 to 1.

  • W = (-3 × 1²) - (-3 × 2²).

  • W = -3 + 12 = 9 J.

The spring does 9 J of positive work as it moves toward its equilibrium position.

Real-world applications

  • Calculating energy stored and released by torsional springs.

  • Analysing position-dependent torque in mechanical systems.

  • Determining work done by nonlinear rotational drives.

  • Studying torque-angle relationships in engines, shafts, and elastic components.

Formula Meaning

Definition

Work done by a variable torque is the definite integral of the torque component along the rotation axis with respect to angular displacement.

Interpretation

When torque changes during rotation, the work is obtained by adding the infinitesimal contributions of torque over small angular displacements.

Mathematical Significance

This formula generalizes rotational work to systems in which torque depends on angular position, such as torsional springs and position-dependent mechanical loads.

Special Cases

  • For constant torque, the integral reduces to W = τΔθ.

  • If torque varies linearly with angular displacement, the work can be calculated from the area under a straight-line torque-angle graph.

  • If torque changes sign, positive and negative work contributions must be included with their signs.

  • For a conservative torsional spring, the work done by the spring depends on the initial and final angular positions.

Sources and further reading

No source has been supplied for this item yet. Treat the claim as needing editorial verification.

← Back to Formula Hub · Suggest a correction or source