✦ScienexySCIENCE KNOWLEDGE LIBRARY
General science · SCI-FORM-ROT-363

Acceleration of a Rolling Body Down an Incline

The acceleration of a rigid circular body rolling down a fixed inclined plane without slipping depends on the gravitational component along the incline, its mass and its moment of inertia about the centre of mass.

\(a_{\mathrm{cm}} = g \sin(\theta) / [1 + I_{\mathrm{cm}}/(MR^2)]\)

What this formula means

Definition

The acceleration of a rigid circular body rolling down a fixed inclined plane without slipping depends on the gravitational component along the incline, its mass and its moment of inertia about the centre of mass.

Interpretation

The gravitational force component along the slope accelerates the centre of mass. At the same time, static friction provides the torque needed to increase the body's angular speed. Because part of the gravitational energy produces rotation, the translational acceleration is generally less than g sin(θ).

Scientific Significance

This relationship explains why different rolling objects released from the same height can reach the bottom of an incline at different times. Objects with smaller dimensionless ratios I_cm/(MR^2) generally accelerate more quickly under the stated conditions.

Special Cases

  • Solid sphere: I_cm = (2/5)MR^2, so a_cm = (5/7)g sin(θ).

  • Solid cylinder: I_cm = (1/2)MR^2, so a_cm = (2/3)g sin(θ).

  • Thin hoop: I_cm = MR^2, so a_cm = (1/2)g sin(θ).

Scientific principle

Principle

The motion is determined by Newton's second law for translation, Newton's second law for rotation and the no-slip rolling constraint.

Derivation

  • Consider a rigid circular body of mass M and radius R rolling down an incline at angle θ.

  • The component of gravitational force down the incline is Mg sin(θ).

  • Let f_s be the magnitude of static friction acting up the incline. The translational equation is Mg sin(θ) - f_s = Ma.

  • Static friction produces a torque about the centre of mass: f_s R = I_cm α.

  • For pure rolling, the linear and angular accelerations satisfy a = αR.

  • Substitute α = a/R into the torque equation: f_s R = I_cm(a/R).

  • Therefore, f_s = I_cm a/R^2.

  • Substitute this into the translational equation: Mg sin(θ) - I_cm a/R^2 = Ma.

  • Rearrange: Mg sin(θ) = a[M + I_cm/R^2].

  • Solving for a gives a = g sin(θ)/[1 + I_cm/(MR^2)].

Final Result

a_cm = g sin(θ) / [1 + I_cm/(MR^2)].

Variables and their meanings

SymbolNameDescription

a_cm

Centre-of-mass acceleration

The linear acceleration of the rolling body's centre of mass along the incline.

g

Gravitational acceleration

The local acceleration due to gravity, approximately 9.81 m/s^2 near Earth's surface.

θ

Inclination angle

The angle between the inclined plane and the horizontal.

I_cm

Moment of inertia

The moment of inertia of the body about its centre-of-mass axis parallel to the contact-point rotational axis.

M

Mass

The total mass of the rolling body.

R

Rolling radius

The distance from the centre of mass to the contact surface.

SI units and conversions

Si Unit

Metre per second squared (m/s^2)

Dimensional Formula

L T^-2

Explanation

The ratio I_cm/(MR^2) is dimensionless. Therefore, the acceleration has the same dimensions as g.

Conversions

  • 1 m/s^2 = 100 cm/s^2

  • 1 km/h per second = 1/3.6 m/s^2

Conditions of use

  • The body must roll without slipping on a stationary incline.

  • The body is treated as rigid, with a fixed mass distribution and constant moment of inertia.

  • The incline angle is constant.

  • The rolling body must be free to rotate about its centre of mass.

  • The coefficient of static friction must be sufficient to maintain pure rolling.

  • Air resistance and rolling resistance are neglected.

Limitations and assumptions

  • The formula is not valid for unrestricted slipping because the constraint a = αR would no longer hold.

  • The expression assumes a circular or otherwise appropriately rolling body with a well-defined effective radius.

  • A deformable object may not follow the ideal rigid-body result.

  • If external forces, applied torques or significant rolling resistance are present, the force and torque equations must be modified.

  • The formula gives acceleration along the slope, not the acceleration of every point of the body.

Step-by-step worked examples

ProblemGivenStepsAnswer

A solid sphere rolls without slipping down a 30° incline. Calculate its centre-of-mass acceleration.

  • Inclination angle, θ = 30°

  • Gravitational acceleration, g = 9.81 m/s^2

  • For a solid sphere, I_cm = (2/5)MR^2.

  • Start with a = g sin(θ)/[1 + I_cm/(MR^2)].

  • Substitute the solid-sphere moment-of-inertia ratio: I_cm/(MR^2) = 2/5.

  • Therefore, a = g sin(30°)/(1 + 2/5).

  • Since sin(30°) = 0.5, a = (9.81 × 0.5)/(1.4).

  • Calculate: a = 4.905/1.4.

  • Therefore, a ≈ 3.50 m/s^2.

The solid sphere accelerates down the incline at approximately 3.50 m/s^2.

A uniform solid cylinder rolls without slipping down a 20° incline. Determine its linear acceleration.

  • Inclination angle, θ = 20°

  • Gravitational acceleration, g = 9.81 m/s^2

  • For a solid cylinder, I_cm = (1/2)MR^2.

  • Use a = g sin(θ)/[1 + I_cm/(MR^2)].

  • Substitute I_cm/(MR^2) = 1/2.

  • Therefore, a = 9.81 sin(20°)/(1 + 0.5).

  • Using sin(20°) ≈ 0.3420, a = (9.81 × 0.3420)/1.5.

  • Calculate: a ≈ 3.354/1.5.

  • Therefore, a ≈ 2.24 m/s^2.

The solid cylinder's centre-of-mass acceleration is approximately 2.24 m/s^2.

Real-world applications

  • Comparing the descent of rolling spheres, cylinders and hoops on inclined tracks.

  • Understanding the motion of wheels on sloped roads.

  • Designing laboratory experiments involving rolling objects.

  • Analysing the movement of barrels and cylindrical containers on ramps.

  • Studying how mass distribution influences the acceleration of rolling objects.

Formula Meaning

Definition

The acceleration of a rigid circular body rolling down a fixed inclined plane without slipping depends on the gravitational component along the incline, its mass and its moment of inertia about the centre of mass.

Interpretation

The gravitational force component along the slope accelerates the centre of mass. At the same time, static friction provides the torque needed to increase the body's angular speed. Because part of the gravitational energy produces rotation, the translational acceleration is generally less than g sin(θ).

Scientific Significance

This relationship explains why different rolling objects released from the same height can reach the bottom of an incline at different times. Objects with smaller dimensionless ratios I_cm/(MR^2) generally accelerate more quickly under the stated conditions.

Special Cases

  • Solid sphere: I_cm = (2/5)MR^2, so a_cm = (5/7)g sin(θ).

  • Solid cylinder: I_cm = (1/2)MR^2, so a_cm = (2/3)g sin(θ).

  • Thin hoop: I_cm = MR^2, so a_cm = (1/2)g sin(θ).

Sources and further reading

No source has been supplied for this item yet. Treat the claim as needing editorial verification.

← Back to Formula Hub · Suggest a correction or source