✦ScienexySCIENCE KNOWLEDGE LIBRARY
General science · SCI-FORM-ROT-368

Torque Required for Angular Acceleration

The torque required to produce a specified angular acceleration in a rigid body rotating about a fixed axis is the product of the body's moment of inertia about that axis and its angular acceleration, provided the expression represents the net torque.

\(\sum\tau = I\alpha; \text{ for } a desired angular acceleration, \tau_{\mathrm{required}} = I\alpha\)

What this formula means

Definition

The torque required to produce a specified angular acceleration in a rigid body rotating about a fixed axis is the product of the body's moment of inertia about that axis and its angular acceleration, provided the expression represents the net torque.

Interpretation

Moment of inertia measures resistance to angular acceleration. A body with greater moment of inertia requires greater net torque to achieve the same angular acceleration. Similarly, a larger angular acceleration requires a larger net torque for a fixed moment of inertia.

Scientific Significance

This relationship is the rotational analogue of Newton's second law for translation. It is widely used to determine the torque requirements of motors, rotating machines, flywheels and mechanical drives.

Important Distinction

Στ = Iα describes the net external torque about the fixed axis. If other torques such as friction or load torque act, the applied driving torque must also overcome or account for them.

Scientific principle

Principle

For a rigid body rotating about a fixed axis with constant moment of inertia, the net external torque equals the moment of inertia multiplied by angular acceleration.

Derivation

  • For rotation about a fixed axis, angular momentum is L = Iω.

  • The rotational equation of motion is Στ = dL/dt.

  • If I is constant, differentiate L = Iω with respect to time: dL/dt = I(dω/dt).

  • Angular acceleration is α = dω/dt.

  • Therefore, Στ = Iα.

  • If a specified angular acceleration is required and no other torque acts, the required torque is τ_required = Iα.

  • If a resisting torque τ_resist acts opposite to the desired direction, the applied torque must be selected from the signed torque balance.

Final Result

Στ = Iα for fixed-axis rotation with constant I. In the absence of other torques, τ_required = Iα.

Variables and their meanings

SymbolNameDescription

Στ

Net torque

The algebraic sum of all external torques acting about the fixed rotational axis.

τ_required

Required applied torque

The torque needed to achieve a specified angular acceleration when other torques are absent.

I

Moment of inertia

The rotational inertia of the body about the selected fixed axis.

α

Angular acceleration

The rate of change of angular velocity with time.

ω

Angular velocity

The rate of change of angular displacement with time.

SI units and conversions

Si Unit

Newton metre (N·m) for torque

Dimensional Formula

M L^2 T^-2

Explanation

Moment of inertia has dimensions M L^2 and angular acceleration has dimensions T^-2. Their product has dimensions M L^2 T^-2, which is the dimension of torque.

Conversions

  • 1 N·m = 1 kg·m^2/s^2

  • Angular acceleration is commonly measured in rad/s^2.

Conditions of use

  • The body must rotate about a fixed axis.

  • The moment of inertia about that axis must remain constant.

  • All torques must be summed using a consistent sign convention.

  • Angular acceleration must be measured about the same axis.

  • For a motor-driven system, load torque and frictional torque must be included in the net torque balance.

Limitations and assumptions

  • The scalar equation is not a complete general equation for arbitrary three-dimensional rigid-body rotation.

  • If the rotational axis changes or the inertia tensor is not constant in the selected frame, the general angular-momentum equation must be used.

  • The equation gives net torque, not necessarily the torque supplied by a motor alone.

  • Real machines may require additional torque to overcome friction, deformation, aerodynamic drag and other resistance.

  • The formula does not determine angular acceleration unless the moment of inertia and net torque are known.

Step-by-step worked examples

ProblemGivenStepsAnswer

A flywheel has a moment of inertia of 3 kg·m^2. Calculate the net torque required to produce an angular acceleration of 4 rad/s^2.

  • Moment of inertia, I = 3 kg·m^2

  • Angular acceleration, α = 4 rad/s^2

  • No other torque acts.

  • Use τ_required = Iα.

  • Substitute: τ_required = 3 × 4.

  • Calculate: τ_required = 12 N·m.

  • The torque must act in the direction of the required angular acceleration.

The required net torque is 12 N·m.

A motor drives a wheel with moment of inertia 0.8 kg·m^2. The wheel must accelerate at 5 rad/s^2 while a resisting torque of 2 N·m acts in the opposite direction. Calculate the required motor torque.

  • Moment of inertia, I = 0.8 kg·m^2

  • Angular acceleration, α = 5 rad/s^2

  • Resisting torque = 2 N·m

  • Choose the direction of the desired angular acceleration as positive.

  • The net torque required is Στ = Iα.

  • Calculate net torque: Στ = 0.8 × 5 = 4 N·m.

  • Let the motor torque be τ_motor in the positive direction and the resisting torque be -2 N·m.

  • The torque balance is τ_motor - 2 = 4.

  • Rearrange: τ_motor = 4 + 2 = 6 N·m.

The motor must supply a torque of 6 N·m.

Real-world applications

  • Calculating the torque requirements of electric motors.

  • Designing flywheels and rotating energy-storage systems.

  • Determining the driving torque required by industrial machinery.

  • Analysing acceleration of vehicle wheels and rotating shafts.

  • Selecting motors and gear ratios for mechanical systems.

Formula Meaning

Definition

The torque required to produce a specified angular acceleration in a rigid body rotating about a fixed axis is the product of the body's moment of inertia about that axis and its angular acceleration, provided the expression represents the net torque.

Interpretation

Moment of inertia measures resistance to angular acceleration. A body with greater moment of inertia requires greater net torque to achieve the same angular acceleration. Similarly, a larger angular acceleration requires a larger net torque for a fixed moment of inertia.

Scientific Significance

This relationship is the rotational analogue of Newton's second law for translation. It is widely used to determine the torque requirements of motors, rotating machines, flywheels and mechanical drives.

Important Distinction

Στ = Iα describes the net external torque about the fixed axis. If other torques such as friction or load torque act, the applied driving torque must also overcome or account for them.

Sources and further reading

No source has been supplied for this item yet. Treat the claim as needing editorial verification.

← Back to Formula Hub · Suggest a correction or source