✦ScienexySCIENCE KNOWLEDGE LIBRARY
General science · SCI-FORM-ROT-369

Moment of Inertia of a Uniform Rod About Its Centre

The moment of inertia of a thin uniform rod of mass M and length L about an axis passing through its centre of mass and perpendicular to the rod is ML^2/12.

\(I_{\mathrm{cm}} = ML^2/12\)

What this formula means

Definition

The moment of inertia of a thin uniform rod of mass M and length L about an axis passing through its centre of mass and perpendicular to the rod is ML^2/12.

Interpretation

The moment of inertia measures how strongly the rod resists angular acceleration about the selected axis. For a uniform rod, mass is distributed evenly along its length. Mass elements farther from the centre contribute more strongly because their contributions are proportional to the square of their distances from the axis.

Scientific Significance

This result is a standard example of calculating rotational inertia for a continuous mass distribution. It is used in pendulums, mechanical linkages, structural models and rotational dynamics.

Axis Specification

The axis must pass through the rod's midpoint and be perpendicular to its length. A different axis gives a different moment of inertia.

Scientific principle

Principle

The moment of inertia of a continuous body about an axis is obtained by integrating the squared perpendicular distance of each mass element from that axis over the entire mass distribution.

Derivation

  • Consider a thin uniform rod of length L and total mass M, centred at the origin.

  • Choose the x-axis along the rod, with the rotation axis passing through x = 0 and perpendicular to the rod.

  • The uniform linear mass density is λ = M/L.

  • A small rod element of length dx has mass dm = λ dx.

  • Its contribution to the moment of inertia is dI = x^2 dm.

  • Integrate over the entire rod: I_cm = ∫ from -L/2 to L/2 x^2 λ dx.

  • Substitute λ = M/L: I_cm = (M/L)∫ from -L/2 to L/2 x^2 dx.

  • Evaluate the integral: I_cm = (M/L)[x^3/3] from -L/2 to L/2.

  • This gives I_cm = (M/L)[L^3/24 - (-L^3/24)].

  • Simplifying gives I_cm = (M/L)(L^3/12) = ML^2/12.

Final Result

I_cm = ML^2/12 for a thin uniform rod about an axis through its centre and perpendicular to its length.

Variables and their meanings

SymbolNameDescription

I_cm

Moment of inertia about the centre

The rotational inertia of the rod about the specified central perpendicular axis.

M

Mass of the rod

The total mass of the uniform rod.

L

Length of the rod

The total length of the rod.

λ

Linear mass density

The mass per unit length of the rod, equal to M/L for a uniform rod.

dm

Infinitesimal mass element

A very small portion of the rod's mass used in the integration.

x

Position along the rod

The signed distance of a mass element from the central rotation axis.

SI units and conversions

Si Unit

Kilogram square metre (kg·m^2)

Dimensional Formula

M L^2

Explanation

Mass has dimension M and length squared has dimension L^2. Their product gives the dimensions of moment of inertia.

Conversions

  • 1 kg·m^2 = 10000 g·cm^2

  • 1 g·cm^2 = 10^-7 kg·m^2

Conditions of use

  • The rod must have uniform linear mass density.

  • The rod is treated as thin, so its cross-sectional dimensions are negligible compared with its length.

  • The rotation axis must pass through the centre of the rod.

  • The rotation axis must be perpendicular to the rod.

  • The rod is assumed to be rigid.

Limitations and assumptions

  • The formula does not apply directly to a non-uniform rod whose mass per unit length varies along its length.

  • The formula is not valid for rotation about an axis along the rod or about an arbitrary displaced axis.

  • A rod with significant cross-sectional dimensions may require a more complete mass-distribution model.

  • For an axis displaced from the centre, the parallel-axis theorem must be used when its conditions are satisfied.

  • The result assumes the rod's mass distribution remains unchanged during rotation.

Step-by-step worked examples

ProblemGivenStepsAnswer

A uniform rod has a mass of 6 kg and a length of 2 m. Calculate its moment of inertia about an axis through its centre and perpendicular to its length.

  • Mass, M = 6 kg

  • Length, L = 2 m

  • Use the central-axis formula: I_cm = ML^2/12.

  • Substitute: I_cm = 6 × (2)^2/12.

  • Square the length: 2^2 = 4.

  • Calculate: I_cm = 24/12.

  • Therefore, I_cm = 2 kg·m^2.

The rod's moment of inertia about its central perpendicular axis is 2 kg·m^2.

A uniform laboratory rod has a mass of 0.8 kg and a length of 1.5 m. Determine its moment of inertia about its centre, perpendicular to its length.

  • Mass, M = 0.8 kg

  • Length, L = 1.5 m

  • Use I_cm = ML^2/12.

  • Substitute the values: I_cm = 0.8 × (1.5)^2/12.

  • Calculate the square: (1.5)^2 = 2.25.

  • Multiply: 0.8 × 2.25 = 1.8.

  • Divide by 12: I_cm = 1.8/12.

  • Therefore, I_cm = 0.15 kg·m^2.

The moment of inertia is 0.15 kg·m^2.

Real-world applications

  • Calculating the rotational inertia of uniform rods in laboratory experiments.

  • Analysing physical pendulums and oscillating rods.

  • Designing rotating mechanical linkages.

  • Modelling thin structural members in rotational dynamics.

  • Providing the central-axis value needed for parallel-axis calculations.

Formula Meaning

Definition

The moment of inertia of a thin uniform rod of mass M and length L about an axis passing through its centre of mass and perpendicular to the rod is ML^2/12.

Interpretation

The moment of inertia measures how strongly the rod resists angular acceleration about the selected axis. For a uniform rod, mass is distributed evenly along its length. Mass elements farther from the centre contribute more strongly because their contributions are proportional to the square of their distances from the axis.

Scientific Significance

This result is a standard example of calculating rotational inertia for a continuous mass distribution. It is used in pendulums, mechanical linkages, structural models and rotational dynamics.

Axis Specification

The axis must pass through the rod's midpoint and be perpendicular to its length. A different axis gives a different moment of inertia.

Sources and further reading

No source has been supplied for this item yet. Treat the claim as needing editorial verification.

← Back to Formula Hub · Suggest a correction or source