✦ScienexySCIENCE KNOWLEDGE LIBRARY
General science · SCI-FORM-ROT-370

Moment of Inertia of a Uniform Rod About One End

The moment of inertia of a thin uniform rod of mass M and length L about an axis passing through one end and perpendicular to its length is ML^2/3.

\(I_{\mathrm{end}} = ML^2/3\)

What this formula means

Definition

The moment of inertia of a thin uniform rod of mass M and length L about an axis passing through one end and perpendicular to its length is ML^2/3.

Interpretation

When the rod rotates about one end, more of its mass lies farther from the rotation axis than in the central-axis case. Since each mass element contributes according to the square of its distance from the axis, the moment of inertia about the end is greater than the moment of inertia about the centre.

Scientific Significance

This formula is important for analysing physical pendulums, hinged rods, doors, mechanical arms and rotating structural members.

Relationship To Centre

Using the parallel-axis theorem, I_end = I_cm + M(L/2)^2 = ML^2/12 + ML^2/4 = ML^2/3. Thus, the end-axis moment of inertia is four times the central-axis value.

Scientific principle

Principle

The moment of inertia is the integral of the squared perpendicular distance of each mass element from the selected rotational axis. For a uniform rod, the mass density is constant along its length.

Derivation

  • Consider a thin uniform rod of length L and mass M, extending from x = 0 to x = L.

  • The rotation axis passes through x = 0 and is perpendicular to the rod.

  • The linear mass density is λ = M/L.

  • A small element of length dx has mass dm = λ dx.

  • Its contribution to the moment of inertia is dI = x^2 dm.

  • Integrate over the rod: I_end = ∫ from 0 to L x^2 λ dx.

  • Substitute λ = M/L: I_end = (M/L)∫ from 0 to L x^2 dx.

  • Evaluate the integral: I_end = (M/L)[x^3/3] from 0 to L.

  • Substitute the limits: I_end = (M/L)(L^3/3).

  • Simplifying gives I_end = ML^2/3.

  • Alternatively, the parallel-axis theorem gives I_end = I_cm + M(L/2)^2 = ML^2/12 + ML^2/4 = ML^2/3.

Final Result

I_end = ML^2/3 for a thin uniform rod about an axis through one end and perpendicular to its length.

Variables and their meanings

SymbolNameDescription

I_end

Moment of inertia about one end

The rotational inertia of the rod about the specified end axis.

M

Mass of the rod

The total mass of the uniform rod.

L

Length of the rod

The total length of the rod.

λ

Linear mass density

The mass per unit length of the rod, equal to M/L for a uniform rod.

x

Distance from the end axis

The position of a small mass element measured along the rod from the rotational axis.

I_cm

Central moment of inertia

The moment of inertia about a parallel axis through the rod's centre of mass.

SI units and conversions

Si Unit

Kilogram square metre (kg·m^2)

Dimensional Formula

M L^2

Explanation

The expression contains mass multiplied by the square of length, giving the dimensions of rotational inertia.

Conversions

  • 1 kg·m^2 = 10000 g·cm^2

  • 1 g·cm^2 = 10^-7 kg·m^2

Conditions of use

  • The rod must have uniform mass distribution along its length.

  • The rod is treated as thin, with negligible cross-sectional dimensions.

  • The rotation axis must pass through one end of the rod.

  • The axis must be perpendicular to the rod.

  • The rod is assumed to be rigid.

Limitations and assumptions

  • The formula is not directly valid for non-uniform rods.

  • The formula does not describe rotation about an axis along the rod.

  • A different axis requires a separate integration or an appropriate application of the parallel-axis theorem.

  • The thin-rod approximation neglects the moment-of-inertia contribution of the cross-section.

  • If the rod is deformable or its mass distribution changes, the ideal rigid-rod result may not be sufficient.

Step-by-step worked examples

ProblemGivenStepsAnswer

A uniform rod has a mass of 3 kg and a length of 1.2 m. Calculate its moment of inertia about an axis through one end and perpendicular to its length.

  • Mass, M = 3 kg

  • Length, L = 1.2 m

  • Use I_end = ML^2/3.

  • Substitute: I_end = 3 × (1.2)^2/3.

  • Calculate the square: (1.2)^2 = 1.44.

  • Multiply: 3 × 1.44 = 4.32.

  • Divide by 3: I_end = 4.32/3.

  • Therefore, I_end = 1.44 kg·m^2.

The moment of inertia about the end axis is 1.44 kg·m^2.

A uniform rod of mass 5 kg and length 2 m is hinged at one end. Calculate its moment of inertia about the hinge axis, assuming the axis is perpendicular to the rod. Also compare it with the moment of inertia about its centre.

  • Mass, M = 5 kg

  • Length, L = 2 m

  • The hinge axis is perpendicular to the rod.

  • Calculate the moment of inertia about the centre: I_cm = ML^2/12.

  • Substitute: I_cm = 5 × (2)^2/12 = 20/12 ≈ 1.667 kg·m^2.

  • Calculate the moment of inertia about the end: I_end = ML^2/3.

  • Substitute: I_end = 5 × 4/3 = 20/3 ≈ 6.667 kg·m^2.

  • Compare the values: I_end/I_cm = (20/3)/(20/12) = 4.

  • The end-axis moment of inertia is four times the central-axis value.

The moment of inertia about the hinge is approximately 6.667 kg·m^2, which is four times the central-axis value of approximately 1.667 kg·m^2.

Real-world applications

  • Calculating the rotational inertia of hinged rods and bars.

  • Analysing physical pendulums consisting of uniform rods.

  • Determining the torque needed to rotate a rod about a hinge.

  • Designing mechanical arms and lever mechanisms.

  • Modelling doors and other approximately rigid bodies rotating about an edge or hinge.

Formula Meaning

Definition

The moment of inertia of a thin uniform rod of mass M and length L about an axis passing through one end and perpendicular to its length is ML^2/3.

Interpretation

When the rod rotates about one end, more of its mass lies farther from the rotation axis than in the central-axis case. Since each mass element contributes according to the square of its distance from the axis, the moment of inertia about the end is greater than the moment of inertia about the centre.

Scientific Significance

This formula is important for analysing physical pendulums, hinged rods, doors, mechanical arms and rotating structural members.

Relationship To Centre

Using the parallel-axis theorem, I_end = I_cm + M(L/2)^2 = ML^2/12 + ML^2/4 = ML^2/3. Thus, the end-axis moment of inertia is four times the central-axis value.

Sources and further reading

No source has been supplied for this item yet. Treat the claim as needing editorial verification.

← Back to Formula Hub · Suggest a correction or source