✦ScienexySCIENCE KNOWLEDGE LIBRARY
General science · SCI-FORM-ROT-372

Moment of Inertia of a Solid Disc About Its Axis

The moment of inertia of a uniform solid circular disc about an axis passing through its centre and perpendicular to its plane is one-half the product of its mass and the square of its radius.

\(I = (1/2)MR^{2}\)

What this formula means

Definition

The moment of inertia of a uniform solid circular disc about an axis passing through its centre and perpendicular to its plane is one-half the product of its mass and the square of its radius.

Interpretation

The formula describes the resistance of a solid disc to angular acceleration about its central perpendicular axis. Because the disc contains mass at different distances from the axis, its rotational inertia depends on the complete radial mass distribution.

Scientific Significance

This is a fundamental result in rotational mechanics and is widely used to analyse wheels, rotating plates, discs, and flywheel-like systems.

Special Cases

  • A disc with twice the mass and unchanged radius has twice the moment of inertia.

  • A disc with twice the radius and unchanged mass has four times the moment of inertia.

  • A thin ring with the same mass and outer radius has I = MR², which is twice the moment of inertia of a uniform solid disc.

Scientific principle

Principle

The moment of inertia is obtained by integrating r² dm over the entire mass distribution of the disc.

Derivation

  • Begin with the general expression: I = ∫r² dm.

  • Consider a uniform solid disc of mass M and radius R.

  • The disc has uniform surface mass density: σ = M/(πR²).

  • Divide the disc into thin concentric circular rings of radius r and radial thickness dr.

  • The area of a thin ring is dA = 2πr dr.

  • The mass of the ring is dm = σdA = 2πσr dr.

  • Every point on this thin ring is approximately at distance r from the central axis.

  • Its contribution to the moment of inertia is dI = r² dm.

  • Therefore, I = ∫₀ᴿ r²(2πσr dr).

  • I = 2πσ ∫₀ᴿ r³ dr.

  • Integrating gives I = 2πσ(R⁴/4).

  • Thus, I = (πσR⁴)/2.

  • Substitute σ = M/(πR²).

  • The result becomes I = (1/2)MR².

Final Result

I = (1/2)MR²

Variables and their meanings

SymbolNameDescription

I

Moment of inertia

The rotational inertia of the disc about its central perpendicular axis.

M

Mass

The total mass of the disc.

R

Radius

The distance from the centre of the disc to its circular boundary.

r

Radial coordinate

The distance of a small ring element from the central axis.

σ

Surface mass density

Mass per unit area of the uniform disc.

SI units and conversions

SIUnit

kg·m²

Dimensional Formula

[M L²]

Explanation

The formula contains mass multiplied by radius squared, giving the dimensions of mass times length squared.

Conditions of use

  • The disc must be uniform and solid.

  • The rotation axis must pass through the centre and be perpendicular to the plane of the disc.

  • The disc is assumed to behave as a rigid body.

  • The mass distribution must be uniform over the circular area.

Limitations and assumptions

  • The formula is not the moment of inertia about a diameter lying in the plane of the disc.

  • For a non-uniform disc, the radial mass distribution must be considered separately.

  • A disc containing a central hole requires a different expression.

  • The formula assumes an ideal rigid disc and neglects deformation.

Step-by-step worked examples

ProblemGivenStepsAnswer

A uniform disc has a mass of 5 kg and a radius of 0.40 m. Find its moment of inertia about the central perpendicular axis.

  • M = 5 kg

  • R = 0.40 m

  • Use I = (1/2)MR².

  • Substitute: I = (1/2)(5)(0.40)².

  • Calculate: (0.40)² = 0.16 m².

  • Therefore, I = 2.5 × 0.16.

  • I = 0.40 kg·m².

0.40 kg·m²

A rotating disc has a mass of 12 kg and a moment of inertia of 0.96 kg·m². Determine its radius, assuming uniform mass distribution.

  • M = 12 kg

  • I = 0.96 kg·m²

  • Start with I = (1/2)MR².

  • Rearrange: R² = 2I/M.

  • Substitute: R² = (2 × 0.96)/12.

  • R² = 1.92/12 = 0.16 m².

  • Take the positive square root: R = √0.16.

  • Therefore, R = 0.40 m.

0.40 m

Real-world applications

  • Calculating the rotational inertia of flywheel discs.

  • Analysing the rotational motion of circular plates and wheels.

  • Designing rotating platforms and mechanical discs.

  • Understanding the energy storage capacity of flywheels.

  • Comparing solid discs with rings and other rotating bodies.

Formula Meaning

Definition

The moment of inertia of a uniform solid circular disc about an axis passing through its centre and perpendicular to its plane is one-half the product of its mass and the square of its radius.

Interpretation

The formula describes the resistance of a solid disc to angular acceleration about its central perpendicular axis. Because the disc contains mass at different distances from the axis, its rotational inertia depends on the complete radial mass distribution.

Scientific Significance

This is a fundamental result in rotational mechanics and is widely used to analyse wheels, rotating plates, discs, and flywheel-like systems.

Special Cases

  • A disc with twice the mass and unchanged radius has twice the moment of inertia.

  • A disc with twice the radius and unchanged mass has four times the moment of inertia.

  • A thin ring with the same mass and outer radius has I = MR², which is twice the moment of inertia of a uniform solid disc.

Sources and further reading

No source has been supplied for this item yet. Treat the claim as needing editorial verification.

← Back to Formula Hub · Suggest a correction or source