✦ScienexySCIENCE KNOWLEDGE LIBRARY
General science · SCI-FORM-ROT-375

Moment of Inertia of a Rectangular Plate About a Central Perpendicular Axis

The moment of inertia of a uniform rectangular plate about an axis passing through its centre and perpendicular to its plane is one-twelfth of its mass multiplied by the sum of the squares of its length and width.

\(I = (1/12)M(a^{2} + b^{2})\)

What this formula means

Definition

The moment of inertia of a uniform rectangular plate about an axis passing through its centre and perpendicular to its plane is one-twelfth of its mass multiplied by the sum of the squares of its length and width.

Interpretation

The formula accounts for the distribution of the plate's mass across both in-plane dimensions. Mass located farther from the central perpendicular axis contributes more strongly to rotational inertia.

Scientific Significance

This formula is used in rotational dynamics, mechanical design, structural analysis, and the study of rotating rectangular plates.

Special Cases

  • For a square plate with side length a, I = (1/6)Ma².

  • If one dimension increases while mass remains constant, the moment of inertia increases.

  • The result is for an axis perpendicular to the plate through its geometric centre.

Scientific principle

Principle

The moment of inertia is obtained by integrating the squared distance from the central perpendicular axis over the entire rectangular area.

Derivation

  • Begin with I = ∫(x² + y²) dm.

  • Consider a uniform rectangular plate of mass M, length a, and width b.

  • Place the origin at the centre of the plate.

  • Let the x-axis run along the length and the y-axis along the width.

  • The central perpendicular rotation axis is the z-axis.

  • The surface mass density is σ = M/(ab).

  • A small area element is dA = dx dy.

  • Its mass is dm = σ dx dy.

  • The squared distance of this element from the z-axis is x² + y².

  • Therefore, I = σ∫₋ₐ/₂ᵃ/₂∫₋ᵦ/₂ᵇ/₂(x² + y²) dy dx.

  • Separate the integrals into the x² contribution and the y² contribution.

  • The x² contribution is σb∫₋ₐ/₂ᵃ/₂ x² dx = σba³/12.

  • The y² contribution is σa∫₋ᵦ/₂ᵇ/₂ y² dy = σab³/12.

  • Adding them gives I = σab(a² + b²)/12.

  • Since σab = M, the final result is I = (1/12)M(a² + b²).

Final Result

I = (1/12)M(a² + b²)

Variables and their meanings

SymbolNameDescription

I

Moment of inertia

The rotational inertia of the rectangular plate about its central perpendicular axis.

M

Mass

The total mass of the rectangular plate.

a

Length

One side dimension of the rectangular plate.

b

Width

The other side dimension of the rectangular plate.

x

Horizontal coordinate

The position of a small mass element along the plate's length.

y

Vertical coordinate

The position of a small mass element along the plate's width.

σ

Surface mass density

Mass per unit area of the uniform rectangular plate.

SI units and conversions

SIUnit

kg·m²

Dimensional Formula

[M L²]

Explanation

The expression combines mass with squared lengths, so its dimensions are mass multiplied by length squared.

Conditions of use

  • The plate must be rectangular and have uniform surface mass density.

  • The rotation axis must pass through the geometric centre.

  • The axis must be perpendicular to the plane of the plate.

  • The plate is assumed to be rigid and sufficiently thin.

Limitations and assumptions

  • The formula does not apply directly to a non-uniform rectangular plate.

  • It is not the moment of inertia about an axis along one of the sides.

  • A plate with holes or cut-outs requires separate integration or subtraction of the removed regions.

  • The formula assumes the plate's thickness is negligible compared with its length and width.

Step-by-step worked examples

ProblemGivenStepsAnswer

A uniform rectangular plate has a mass of 12 kg, a length of 2 m, and a width of 1 m. Calculate its moment of inertia about the central perpendicular axis.

  • M = 12 kg

  • a = 2 m

  • b = 1 m

  • Use I = (1/12)M(a² + b²).

  • Substitute: I = (1/12)(12)(2² + 1²).

  • Calculate the squares: 2² = 4 and 1² = 1.

  • Add: 4 + 1 = 5.

  • Therefore, I = 1 × 5.

  • I = 5 kg·m².

5 kg·m²

A uniform square plate has a mass of 6 kg and a side length of 0.60 m. Find its moment of inertia about the central perpendicular axis.

  • M = 6 kg

  • a = b = 0.60 m

  • Start with I = (1/12)M(a² + b²).

  • Since the plate is square, substitute a = b = 0.60 m.

  • I = (1/12)(6)[(0.60)² + (0.60)²].

  • Calculate: 0.36 + 0.36 = 0.72 m².

  • I = (6/12)(0.72).

  • Therefore, I = 0.36 kg·m².

0.36 kg·m²

Real-world applications

  • Calculating the rotational inertia of rectangular mechanical plates.

  • Designing rotating platforms and machine components.

  • Studying the rotational dynamics of doors and panels with appropriate axis transformations.

  • Analysing rectangular plates used in engineering structures.

  • Comparing the rotational behaviour of rectangular and circular plates.

Formula Meaning

Definition

The moment of inertia of a uniform rectangular plate about an axis passing through its centre and perpendicular to its plane is one-twelfth of its mass multiplied by the sum of the squares of its length and width.

Interpretation

The formula accounts for the distribution of the plate's mass across both in-plane dimensions. Mass located farther from the central perpendicular axis contributes more strongly to rotational inertia.

Scientific Significance

This formula is used in rotational dynamics, mechanical design, structural analysis, and the study of rotating rectangular plates.

Special Cases

  • For a square plate with side length a, I = (1/6)Ma².

  • If one dimension increases while mass remains constant, the moment of inertia increases.

  • The result is for an axis perpendicular to the plate through its geometric centre.

Sources and further reading

No source has been supplied for this item yet. Treat the claim as needing editorial verification.

← Back to Formula Hub · Suggest a correction or source