✦ScienexySCIENCE KNOWLEDGE LIBRARY
General science · SCI-FORM-THM-003

Carnot Heat-Engine Efficiency

The efficiency of a reversible Carnot heat engine operating between a hot reservoir at absolute temperature Th and a cold reservoir at absolute temperature Tc is one minus the ratio of the cold-reservoir temperature to the hot-reservoir temperature.

\(\eta = 1 - Tc/Th\)

What this formula means

Definition

The efficiency of a reversible Carnot heat engine operating between a hot reservoir at absolute temperature Th and a cold reservoir at absolute temperature Tc is one minus the ratio of the cold-reservoir temperature to the hot-reservoir temperature.

Interpretation

The efficiency depends only on the two reservoir temperatures, not on the working substance. Temperatures must be expressed in kelvin.

Physical Significance

It establishes the maximum possible efficiency for any engine operating between two fixed-temperature reservoirs.

Scientific principle

Principle

Second law of thermodynamics and the reversible Carnot cycle.

Derivation

StepExplanationExpression

1

For a heat engine, efficiency is work output divided by heat absorbed from the hot reservoir.

η = W/Qh

2

For a complete cycle, the working substance returns to its initial state, so its net internal-energy change is zero.

W = Qh − Qc

3

A reversible Carnot cycle has heat-transfer ratio equal to the absolute-temperature ratio.

Qc/Qh = Tc/Th

4

Substitute the reversible heat ratio into the efficiency definition.

η = (Qh − Qc)/Qh = 1 − Tc/Th

Result

The Carnot efficiency is the theoretical upper limit for a heat engine between two reservoirs at fixed absolute temperatures.

Variables and their meanings

SymbolMeaningDescription

η

Thermal efficiency

Fraction of heat input converted into net work.

Tc

Cold-reservoir temperature

Absolute temperature of the low-temperature reservoir.

Th

Hot-reservoir temperature

Absolute temperature of the high-temperature reservoir.

SI units and conversions

Si Unit

dimensionless (often expressed as %)

Dimensional Formula

[1]

Unit Explanation

The ratio of two absolute temperatures is dimensionless, so efficiency has no physical dimension.

Unit Conversions

ConversionApplication

η(%) = 100η

Convert fractional efficiency to percentage.

T(K) = t(°C) + 273.15

Convert Celsius temperatures to kelvin.

Conditions of use

  • The engine operates between two thermal reservoirs.

  • The Carnot limit assumes a reversible cycle.

  • Both reservoir temperatures are uniform and expressed in kelvin.

  • Th must be greater than Tc for a heat engine.

Limitations and assumptions

  • Real engines have irreversibilities and achieve lower efficiency.

  • The equation gives a maximum limit, not the actual efficiency of a practical engine.

  • Using Celsius temperatures in the ratio gives an incorrect result.

  • The formula is for heat-engine efficiency; refrigerators and heat pumps use coefficients of performance.

Step-by-step worked examples

ProblemGivenSolutionAnswer

A theoretical engine operates between reservoirs at 600 K and 300 K. Find its Carnot efficiency.

  • Th = 600 K

  • Tc = 300 K

StepExplanationCalculation

1

Write the Carnot efficiency equation.

η = 1 − Tc/Th

2

Substitute the temperatures.

η = 1 − 300/600

3

Evaluate the ratio.

η = 1 − 0.5 = 0.5

4

Convert to percentage.

η = 0.5 × 100% = 50%

The maximum possible efficiency is 50%.

Real-world applications

ApplicationExplanation

Power-station analysis

The Carnot limit provides a benchmark for thermal power cycles.

Engine design

Engineers compare practical performance with the reversible upper bound.

Refrigeration science

The same reversible-cycle framework leads to ideal refrigerator and heat-pump performance limits.

Thermodynamics education

It illustrates the second-law restriction on converting heat completely into work.

Topics

  • thermodynamics

  • Carnot cycle

  • heat engine

  • thermal efficiency

  • second law

  • Thermodynamics

Formula Meaning

Definition

The efficiency of a reversible Carnot heat engine operating between a hot reservoir at absolute temperature Th and a cold reservoir at absolute temperature Tc is one minus the ratio of the cold-reservoir temperature to the hot-reservoir temperature.

Interpretation

The efficiency depends only on the two reservoir temperatures, not on the working substance. Temperatures must be expressed in kelvin.

Physical Significance

It establishes the maximum possible efficiency for any engine operating between two fixed-temperature reservoirs.

Sources and further reading

No source has been supplied for this item yet. Treat the claim as needing editorial verification.

← Back to Formula Hub · Suggest a correction or source