✦ScienexySCIENCE KNOWLEDGE LIBRARY
Science reference · INFO-PHY-ACOU-010

Factors Affecting the Speed of Sound

Sound speed depends on the medium's elastic properties, density, temperature, and physical state.

v = √(B/ρ)

Explanation

The speed of sound is controlled by how strongly a medium resists compression or deformation and by its inertia, represented by density. In fluids, the small-signal sound speed is given by the square root of the ratio of the appropriate bulk modulus to density. In an ideal gas, sound speed depends on absolute temperature, the ratio of specific heats, the universal gas constant, and molar mass. For an ideal gas, pressure and density do not independently change sound speed when temperature and gas composition remain fixed, because their effects are linked by the gas equation of state. Humidity changes the average molar mass of air and generally increases sound speed at the same temperature and pressure. In solids, elastic moduli, density, and the type of wave mode determine the speed. Wind can change the speed measured relative to the ground because it advects sound through the moving atmosphere.

Variables

SymbolMeaning

B

Bulk modulus of a fluid, measured in pascals (Pa).

ρ

Density, measured in kilograms per cubic metre (kg/m³).

γ

Ratio of specific heat capacities at constant pressure and volume.

R

Universal gas constant, approximately 8.314 J/(mol·K).

T

Absolute temperature, measured in kelvin (K).

M

Molar mass of the gas, measured in kilograms per mole (kg/mol).

Example or application

For an ideal gas of fixed composition, increasing absolute temperature increases sound speed because v = √(γRT/M). If absolute temperature rises from 300 K to 330 K, the speed is multiplied by √(330/300), approximately 1.049, or about a 4.9% increase.

Key Points

  • Elasticity and density jointly influence sound speed.

  • For an ideal gas, sound speed increases with absolute temperature.

  • Gas composition affects sound speed through molar mass and specific heat ratio.

  • Humidity generally increases sound speed in air at the same temperature and pressure.

  • Wind changes ground-relative propagation speed and direction.

  • The relevant formula depends on the medium and wave mode.

Applications

  • Weather-related acoustic propagation modelling.

  • Calibrating acoustic distance-measurement systems.

  • Underwater acoustic navigation.

  • Non-destructive material testing.

  • Designing acoustic sensors for different environments.

Common Mistakes

  • Treating pressure as an independent sound-speed factor in an ideal gas when temperature and composition are fixed.

  • Using Celsius instead of kelvin in ideal-gas sound-speed equations.

  • Ignoring the distinction between sound speed relative to air and speed relative to the ground.

  • Applying a fluid formula directly to every solid.

Learning Outcomes

  • Identify the major factors affecting sound speed.

  • Explain the roles of elasticity and density.

  • Describe temperature dependence in an ideal gas.

  • Distinguish the effects of pressure, density, humidity, and wind.

Practice Questions

QuestionAnswer

How does sound speed in an ideal gas change as absolute temperature increases?

It increases in proportion to the square root of absolute temperature when gas composition remains fixed.

Why should temperature be expressed in kelvin in the ideal-gas sound-speed equation?

Because the equation uses absolute thermodynamic temperature, not a temperature scale with an arbitrary zero.

Does increasing pressure alone change sound speed in an ideal gas at fixed temperature and composition?

No. Under those conditions, pressure and density change together, leaving the ideal-gas sound speed unchanged.

Related Concepts

  • Speed of Sound

  • Sound Propagation in Air

  • Temperature Dependence of Sound Speed

  • Acoustic Impedance

Sources and verification

Sources are shown as provided in the project data. Not every source has yet been independently verified. Please report errors or missing citations.

  • Fundamentals of Acoustics by Lawrence E. Kinsler et al.; OpenStax University Physics, Volume 1.

Suggest a correction or source · More in Acoustics