✦ScienexySCIENCE KNOWLEDGE LIBRARY
Science reference · INFO-PHY-ACOU-022

Decibel Scale

The decibel is a logarithmic unit used to express ratios of power-like quantities and related acoustic levels.

L = 10 log₁₀(P₂/P₁)

Explanation

The decibel (dB) is a logarithmic way of expressing the ratio between two quantities, especially power or intensity. For a power ratio, the level difference is ten times the base-10 logarithm of the ratio. For field quantities such as sound pressure, voltage, or particle velocity, a factor of 20 is commonly used when the corresponding power is proportional to the square of that quantity and the relevant conditions are the same. A decibel value is therefore a relative level unless a reference quantity is specified. In acoustics, reference intensity and reference sound pressure are used to define particular absolute sound levels. Decibels do not behave like ordinary linear units: two equal decibel values cannot simply be added to obtain the level of two sources. Independent sound intensities must be combined in the linear intensity domain before converting the result back to decibels.

Variables

SymbolMeaning

L

Level difference, measured in decibels (dB).

P₂

Second power-like quantity or power value.

P₁

Reference power-like quantity or power value.

Example or application

If one sound source has ten times the intensity of another, the intensity-level difference is 10 log₁₀(10) = 10 dB. If the intensity is 100 times larger, the difference is 20 dB.

Key Points

  • The decibel scale is logarithmic.

  • Power and intensity ratios use a factor of 10.

  • Pressure ratios use a factor of 20 when power is proportional to pressure squared under the same conditions.

  • A decibel value needs a reference to represent an absolute level.

  • Independent sound intensities must be added linearly before converting to decibels.

Applications

  • Expressing sound intensity levels.

  • Measuring sound pressure levels.

  • Describing amplifier gain and attenuation.

  • Comparing acoustic insulation performance.

  • Reporting noise measurements.

Common Mistakes

  • Treating decibels as a linear unit.

  • Using the power-ratio formula for a pressure ratio without accounting for the squared relationship.

  • Adding decibel values directly for independent sources.

  • Assuming every decibel value represents an absolute level without a reference.

Learning Outcomes

  • Explain the logarithmic nature of the decibel scale.

  • Distinguish power ratios from field-quantity ratios.

  • Interpret common decibel changes.

  • Explain why decibel levels cannot always be added directly.

Practice Questions

QuestionAnswer

What type of scale is the decibel scale?

It is a logarithmic scale.

What level difference corresponds to a power ratio of 100?

L = 10 log₁₀(100) = 20 dB.

Why is 20 log₁₀ commonly used for sound-pressure ratios?

Because sound intensity is proportional to the square of sound pressure under the same propagation conditions, and 10 log₁₀ of a squared ratio becomes 20 log₁₀ of the pressure ratio.

Related Concepts

  • Sound Intensity Level

  • Sound Pressure Level

  • Acoustic Power

  • Noise Measurement and Monitoring

Sources and verification

Sources are shown as provided in the project data. Not every source has yet been independently verified. Please report errors or missing citations.

  • IEC 61672-1, Electroacoustics: Sound Level Meters; Fundamentals of Acoustics by Lawrence E. Kinsler et al.

Suggest a correction or source · More in Acoustics