✦ScienexySCIENCE KNOWLEDGE LIBRARY
Science reference · INFO-PHY-ACOU-026

Relationship Between Sound Pressure and Intensity

For a plane progressive sinusoidal sound wave in a lossless fluid, average intensity is proportional to the square of RMS sound pressure.

I = p_rms²/(ρc)

Explanation

Sound pressure and sound intensity describe different aspects of an acoustic wave. Sound pressure is a local scalar variation measured in pascals, while sound intensity describes the average directional flow of acoustic energy per unit area. For a plane progressive sinusoidal wave in a lossless fluid, the time-averaged intensity is equal to the mean-square RMS sound pressure divided by the characteristic specific acoustic impedance of the medium, ρc. This relation depends on the stated wave conditions and should not be applied without care to arbitrary standing waves or complex reactive sound fields. Under the same medium and propagation conditions, intensity is proportional to the square of RMS sound pressure. Therefore, doubling RMS sound pressure produces four times the average intensity. This square relationship explains why pressure-level differences use a factor of 20 in the decibel formula.

Variables

SymbolMeaning

I

Time-averaged sound intensity, measured in watts per square metre (W/m²).

p_rms

Root-mean-square acoustic pressure, measured in pascals (Pa).

ρ

Density of the medium, measured in kilograms per cubic metre (kg/m³).

c

Speed of sound in the medium, measured in metres per second (m/s).

ρc

Characteristic specific acoustic impedance of the fluid, measured in Pa·s/m.

Example or application

In air with density ρ = 1.2 kg/m³ and sound speed c = 343 m/s, a plane progressive wave has RMS pressure p_rms = 0.1 Pa. Its average intensity is approximately I = 0.1²/(1.2 × 343) = 0.0000243 W/m².

Key Points

  • Sound pressure is a local pressure variation.

  • Intensity measures average directional energy flow per unit area.

  • For a plane progressive wave in a lossless fluid, intensity is proportional to RMS pressure squared.

  • The characteristic impedance ρc links pressure and particle velocity.

  • The pressure-intensity relation has assumptions and is not universal for every sound field.

Applications

  • Converting sound-pressure measurements into intensity estimates.

  • Calibrating acoustic measurement systems.

  • Estimating sound-energy flow in ducts.

  • Understanding sound-pressure level and intensity-level relationships.

  • Analysing progressive sound waves in air and liquids.

Common Mistakes

  • Using the equation for every standing-wave or reactive acoustic field.

  • Using peak pressure in place of RMS pressure without the required conversion.

  • Confusing characteristic impedance ρc with acoustic power.

  • Assuming pressure and intensity are directly proportional.

Learning Outcomes

  • Distinguish sound pressure from sound intensity.

  • Explain the pressure-intensity relationship for a plane progressive wave.

  • Use RMS pressure in intensity calculations.

  • Identify the assumptions required by the relationship.

Practice Questions

QuestionAnswer

For a plane progressive sinusoidal wave, how is intensity related to RMS pressure?

I = p_rms²/(ρc), where ρc is the characteristic specific acoustic impedance of the medium.

If RMS pressure doubles in the same medium, by what factor does intensity change?

Intensity increases by a factor of four.

Why should this pressure-intensity equation not be applied blindly to a standing wave?

A standing wave can contain reactive energy exchange and pressure-velocity phase differences, so the simple progressive-wave relation may not describe its net average energy flow.

Related Concepts

  • Sound Pressure and Sound Pressure Level

  • Sound Intensity

  • Acoustic Impedance

  • Decibel Scale

Sources and verification

Sources are shown as provided in the project data. Not every source has yet been independently verified. Please report errors or missing citations.

  • Fundamentals of Acoustics by Lawrence E. Kinsler et al.; Engineering Acoustics by Michael Möser.

Suggest a correction or source · More in Acoustics