✦ScienexySCIENCE KNOWLEDGE LIBRARY
Science reference · INFO-PHY-ACOU-030

Acoustic Impedance

Acoustic impedance describes how pressure and particle velocity are related in an acoustic field and how a medium or boundary responds to sound.

z = p/u; Z = p/U

Explanation

Acoustic impedance is a measure of the opposition or response presented by an acoustic medium or system to oscillatory motion and energy transfer. The term is used for more than one related quantity, so the definition must be stated carefully. Specific acoustic impedance is the ratio of acoustic pressure to particle velocity at a point: z = p/u. Its SI unit is pascal-second per metre (Pa·s/m), equivalent to rayl. Acoustic impedance is generally complex in sinusoidal analysis because pressure and particle velocity may have a phase difference. The characteristic specific acoustic impedance of a plane progressive wave in a lossless fluid is ρc, where ρ is density and c is sound speed. Volume-velocity acoustic impedance is defined as the ratio of acoustic pressure to volume velocity, Z = p/U, and has units of Pa·s/m³. These quantities should not be confused. Acoustic impedance is important when sound crosses boundaries between materials, because differences in impedance influence reflection and transmission. Matching impedances can improve energy transfer, while a large mismatch can cause strong reflection.

Variables

SymbolMeaning

z

Specific acoustic impedance, measured in Pa·s/m or rayl.

p

Acoustic pressure, measured in pascals (Pa).

u

Particle velocity, measured in metres per second (m/s).

Z

Volume-velocity acoustic impedance, measured in Pa·s/m³.

U

Volume velocity, measured in cubic metres per second (m³/s).

ρ

Density of the medium, measured in kilograms per cubic metre (kg/m³).

c

Speed of sound in the medium, measured in metres per second (m/s).

Example or application

For air with density ρ = 1.2 kg/m³ and sound speed c = 343 m/s, the characteristic specific acoustic impedance for a plane progressive wave is z₀ = ρc = 1.2 × 343 = 411.6 Pa·s/m, approximately 412 rayl.

Key Points

  • Specific acoustic impedance is the ratio of acoustic pressure to particle velocity.

  • The characteristic specific impedance of a plane progressive wave in a lossless fluid is ρc.

  • Specific acoustic impedance has units of Pa·s/m or rayl.

  • Volume-velocity impedance uses volume velocity rather than particle velocity.

  • Acoustic impedance can be complex when pressure and velocity are not in phase.

  • Impedance mismatch at a boundary can cause sound reflection.

Applications

  • Designing loudspeakers and acoustic transducers.

  • Understanding sound transmission between different materials.

  • Designing acoustic matching layers in medical ultrasound.

  • Analysing resonators, ducts, and room boundaries.

  • Measuring the acoustic response of materials.

Common Mistakes

  • Confusing specific acoustic impedance with volume-velocity impedance.

  • Using the unit of volume-velocity impedance for specific impedance.

  • Assuming acoustic impedance is always purely real.

  • Treating ρc as the impedance of every possible sound field rather than the characteristic impedance for a plane progressive wave in a lossless fluid.

  • Confusing acoustic impedance with mechanical or electrical resistance.

Learning Outcomes

  • Define specific acoustic impedance.

  • Distinguish specific impedance from volume-velocity impedance.

  • Calculate characteristic acoustic impedance from density and sound speed.

  • Explain how impedance mismatch influences sound reflection and transmission.

Practice Questions

QuestionAnswer

What is specific acoustic impedance?

It is the ratio of acoustic pressure to particle velocity at a point: z = p/u.

Calculate the characteristic specific acoustic impedance of a fluid with density 1000 kg/m³ and sound speed 1500 m/s.

z₀ = ρc = 1000 × 1500 = 1.5 × 10⁶ Pa·s/m.

Why can an acoustic impedance mismatch cause reflection?

Because the acoustic wave encounters a change in the pressure-velocity relationship at the boundary, so not all incident acoustic energy is transmitted into the next medium.

Related Concepts

  • Sound Pressure and Sound Pressure Level

  • Relationship Between Sound Pressure and Intensity

  • Sound Propagation in Solids, Liquids and Gases

  • Reflection of Sound Waves

Sources and verification

Sources are shown as provided in the project data. Not every source has yet been independently verified. Please report errors or missing citations.

  • Fundamentals of Acoustics by Lawrence E. Kinsler et al.; Engineering Acoustics by Michael Möser.

Suggest a correction or source · More in Acoustics