✦ScienexySCIENCE KNOWLEDGE LIBRARY
Science reference · INFO-PHY-ACOU-082

Standing Waves in Air Columns

Standing waves in air columns form when sound waves travelling in opposite directions interfere inside a tube or cavity.

Open pipe: fₙ = nv/(2L); closed pipe: fₙ = (2n − 1)v/(4L)

Explanation

A standing wave can form in an air column when an incident sound wave and its reflected wave travel in opposite directions and have the same frequency. Boundary conditions at the ends of the air column determine which patterns are allowed. In an ideal open-open pipe, the air displacement is approximately an antinode at each open end, and the resonant frequencies are integer multiples of the fundamental frequency. In an ideal open-closed pipe, the closed end is a displacement node and the open end is a displacement antinode, so only odd harmonics occur. Real pipes may require end corrections because the effective vibrating air-column length is slightly different from the physical length.

Variables

SymbolMeaningUnit

fₙ

Frequency of the nth allowed mode

Hz

n

Mode number; positive integer for an open-open pipe and odd-harmonic indexing as specified for a closed pipe

Dimensionless

v

Speed of sound in air

m/s

L

Effective length of the air column

m

Example or application

An ideal open-open pipe of effective length 0.50 m has a fundamental frequency of approximately 343/(2 × 0.50) = 343 Hz when the speed of sound is 343 m/s.

Key Points

  • Standing waves form from oppositely travelling waves of the same frequency.

  • Pipe-end conditions determine the allowed modes.

  • Open-open pipes support all integer harmonics.

  • Ideal open-closed pipes support odd harmonics.

  • End correction may be needed for real pipes.

Applications

  • Wind instrument design

  • Organ pipes

  • Resonance-tube experiments

  • Acoustic frequency measurement

  • Musical acoustics

Common Mistakes

  • Using the open-open pipe formula for a closed pipe.

  • Assuming a closed pipe supports all integer harmonics.

  • Ignoring end correction when accurate real-pipe frequencies are required.

Learning Outcomes

  • Explain how standing waves form in air columns.

  • Identify boundary conditions in open and closed pipes.

  • Calculate resonant frequencies for ideal pipes.

  • Explain why end correction is used.

Practice Questions

QuestionAnswer

What produces a standing wave in an air column?

Interference between oppositely travelling sound waves, usually an incident and reflected wave.

Which harmonics occur in an ideal open-closed pipe?

Odd harmonics only.

What is the fundamental frequency of an open pipe of length 1 m when v = 340 m/s?

170 Hz.

Related Concepts

  • Nodes and Antinodes in Sound Waves

  • Resonance in Sound Waves

  • Open Organ Pipes

  • Closed Organ Pipes

Sources and verification

Sources are shown as provided in the project data. Not every source has yet been independently verified. Please report errors or missing citations.

  • OpenStax University Physics, Volume 1 — Sound
  • Fundamentals of Acoustics — Lawrence E. Kinsler et al.

Suggest a correction or source · More in Acoustics